Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at basescan.org on 2024-06-03
*/

// SPDX-License-Identifier: MIT

// File: @openzeppelin/[email protected]/interfaces/draft-IERC6093.sol

// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// File: @openzeppelin/[email protected]/utils/Context.sol

// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// File: @openzeppelin/[email protected]/access/Ownable.sol

// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/[email protected]/utils/Pausable.sol

// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: @openzeppelin/[email protected]/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// File: @openzeppelin/[email protected]/token/ERC20/extensions/IERC20Metadata.sol

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/[email protected]/token/ERC20/ERC20.sol

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// File: @openzeppelin/[email protected]/token/ERC20/extensions/ERC20Pausable.sol

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Pausable.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract pause mechanism of the contract unreachable, and thus unusable.
 */
abstract contract ERC20Pausable is ERC20, Pausable {
    /**
     * @dev See {ERC20-_update}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _update(address from, address to, uint256 value) internal virtual override whenNotPaused {
        super._update(from, to, value);
    }
}

// File: @openzeppelin/[email protected]/token/ERC20/extensions/ERC20Burnable.sol

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.20;

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}

// File: Gochujangcoin.sol

pragma solidity ^0.8.20;

contract Gochujangcoin is ERC20, ERC20Burnable, ERC20Pausable, Ownable {
    constructor(address initialOwner)
        ERC20("Gochujangcoin", "GOCHU")
        Ownable(initialOwner)
    {
        _mint(msg.sender, 30000000000000 * 10 ** decimals());
    }

    function pause() public onlyOwner {
        _pause();
    }

    function unpause() public onlyOwner {
        _unpause();
    }

    function _update(address from, address to, uint256 value)
        internal
        override(ERC20, ERC20Pausable)
    {
        super._update(from, to, value);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialOwner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0x608060405234801561001057600080fd5b506004361061010b5760003560e01c806370a08231116100a25780638da5cb5b116100715780638da5cb5b146101f957806395d89b4114610222578063a9059cbb1461022a578063dd62ed3e1461023d578063f2fde38b1461027657600080fd5b806370a08231146101ad578063715018a6146101d657806379cc6790146101de5780638456cb59146101f157600080fd5b8063313ce567116100de578063313ce567146101765780633f4ba83a1461018557806342966c681461018f5780635c975abb146101a257600080fd5b806306fdde0314610110578063095ea7b31461012e57806318160ddd1461015157806323b872dd14610163575b600080fd5b610118610289565b60405161012591906108b0565b60405180910390f35b61014161013c36600461091a565b61031b565b6040519015158152602001610125565b6002545b604051908152602001610125565b610141610171366004610944565b610335565b60405160128152602001610125565b61018d610359565b005b61018d61019d366004610980565b61036b565b60055460ff16610141565b6101556101bb366004610999565b6001600160a01b031660009081526020819052604090205490565b61018d610378565b61018d6101ec36600461091a565b61038a565b61018d6103a3565b60055461010090046001600160a01b03166040516001600160a01b039091168152602001610125565b6101186103b3565b61014161023836600461091a565b6103c2565b61015561024b3660046109bb565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b61018d610284366004610999565b6103d0565b606060038054610298906109ee565b80601f01602080910402602001604051908101604052809291908181526020018280546102c4906109ee565b80156103115780601f106102e657610100808354040283529160200191610311565b820191906000526020600020905b8154815290600101906020018083116102f457829003601f168201915b5050505050905090565b600033610329818585610410565b60019150505b92915050565b600033610343858285610422565b61034e8585856104a0565b506001949350505050565b6103616104ff565b610369610532565b565b6103753382610584565b50565b6103806104ff565b61036960006105ba565b610395823383610422565b61039f8282610584565b5050565b6103ab6104ff565b610369610614565b606060048054610298906109ee565b6000336103298185856104a0565b6103d86104ff565b6001600160a01b03811661040757604051631e4fbdf760e01b8152600060048201526024015b60405180910390fd5b610375816105ba565b61041d8383836001610651565b505050565b6001600160a01b03838116600090815260016020908152604080832093861683529290522054600019811461049a578181101561048b57604051637dc7a0d960e11b81526001600160a01b038416600482015260248101829052604481018390526064016103fe565b61049a84848484036000610651565b50505050565b6001600160a01b0383166104ca57604051634b637e8f60e11b8152600060048201526024016103fe565b6001600160a01b0382166104f45760405163ec442f0560e01b8152600060048201526024016103fe565b61041d838383610726565b6005546001600160a01b036101009091041633146103695760405163118cdaa760e01b81523360048201526024016103fe565b61053a610731565b6005805460ff191690557f5db9ee0a495bf2e6ff9c91a7834c1ba4fdd244a5e8aa4e537bd38aeae4b073aa335b6040516001600160a01b03909116815260200160405180910390a1565b6001600160a01b0382166105ae57604051634b637e8f60e11b8152600060048201526024016103fe565b61039f82600083610726565b600580546001600160a01b03838116610100818102610100600160a81b031985161790945560405193909204169182907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b61061c610754565b6005805460ff191660011790557f62e78cea01bee320cd4e420270b5ea74000d11b0c9f74754ebdbfc544b05a2586105673390565b6001600160a01b03841661067b5760405163e602df0560e01b8152600060048201526024016103fe565b6001600160a01b0383166106a557604051634a1406b160e11b8152600060048201526024016103fe565b6001600160a01b038085166000908152600160209081526040808320938716835292905220829055801561049a57826001600160a01b0316846001600160a01b03167f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9258460405161071891815260200190565b60405180910390a350505050565b61041d838383610778565b60055460ff1661036957604051638dfc202b60e01b815260040160405180910390fd5b60055460ff16156103695760405163d93c066560e01b815260040160405180910390fd5b610780610754565b61041d8383836001600160a01b0383166107b15780600260008282546107a69190610a28565b909155506108239050565b6001600160a01b038316600090815260208190526040902054818110156108045760405163391434e360e21b81526001600160a01b038516600482015260248101829052604481018390526064016103fe565b6001600160a01b03841660009081526020819052604090209082900390555b6001600160a01b03821661083f5760028054829003905561085e565b6001600160a01b03821660009081526020819052604090208054820190555b816001600160a01b0316836001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef836040516108a391815260200190565b60405180910390a3505050565b600060208083528351808285015260005b818110156108dd578581018301518582016040015282016108c1565b506000604082860101526040601f19601f8301168501019250505092915050565b80356001600160a01b038116811461091557600080fd5b919050565b6000806040838503121561092d57600080fd5b610936836108fe565b946020939093013593505050565b60008060006060848603121561095957600080fd5b610962846108fe565b9250610970602085016108fe565b9150604084013590509250925092565b60006020828403121561099257600080fd5b5035919050565b6000602082840312156109ab57600080fd5b6109b4826108fe565b9392505050565b600080604083850312156109ce57600080fd5b6109d7836108fe565b91506109e5602084016108fe565b90509250929050565b600181811c90821680610a0257607f821691505b602082108103610a2257634e487b7160e01b600052602260045260246000fd5b50919050565b8082018082111561032f57634e487b7160e01b600052601160045260246000fdfea26469706673582212206e678fcf7f4940c8aaae2ddf6ea301692f48b866eb2b9507fb5a848eb30712d164736f6c63430008140033

000000000000000000000000c98a9794aecd72cc3b74859cbe395459ef2fec92

-----Decoded View---------------
Arg [0] : initialOwner (address): 0xc98A9794aeCD72cC3b74859Cbe395459EF2feC92

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000c98a9794aecd72cc3b74859cbe395459ef2fec92

31277:583:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19457:91;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;21750:190;;;;;;:::i;:::-;;:::i;:::-;;;1169:14:1;;1162:22;1144:41;;1132:2;1117:18;21750:190:0;1004:187:1;20559:99:0;20638:12;;20559:99;;;1342:25:1;;;1330:2;1315:18;20559:99:0;1196:177:1;22518:249:0;;;;;;:::i;:::-;;:::i;20410:84::-;;;20484:2;1853:36:1;;1841:2;1826:18;20410:84:0;1711:184:1;31614:65:0;;;:::i;:::-;;30633:89;;;;;;:::i;:::-;;:::i;12876:86::-;12947:7;;;;12876:86;;20721:118;;;;;;:::i;:::-;-1:-1:-1;;;;;20813:18:0;20786:7;20813:18;;;;;;;;;;;;20721:118;10138:103;;;:::i;31051:161::-;;;;;;:::i;:::-;;:::i;31545:61::-;;;:::i;9463:87::-;9536:6;;;;;-1:-1:-1;;;;;9536:6:0;9463:87;;-1:-1:-1;;;;;2440:32:1;;;2422:51;;2410:2;2395:18;9463:87:0;2276:203:1;19667:95:0;;;:::i;21044:182::-;;;;;;:::i;:::-;;:::i;21289:142::-;;;;;;:::i;:::-;-1:-1:-1;;;;;21396:18:0;;;21369:7;21396:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;21289:142;10396:220;;;;;;:::i;:::-;;:::i;19457:91::-;19502:13;19535:5;19528:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19457:91;:::o;21750:190::-;21823:4;7550:10;21879:31;7550:10;21895:7;21904:5;21879:8;:31::i;:::-;21928:4;21921:11;;;21750:190;;;;;:::o;22518:249::-;22605:4;7550:10;22663:37;22679:4;7550:10;22694:5;22663:15;:37::i;:::-;22711:26;22721:4;22727:2;22731:5;22711:9;:26::i;:::-;-1:-1:-1;22755:4:0;;22518:249;-1:-1:-1;;;;22518:249:0:o;31614:65::-;9349:13;:11;:13::i;:::-;31661:10:::1;:8;:10::i;:::-;31614:65::o:0;30633:89::-;30688:26;7550:10;30708:5;30688;:26::i;:::-;30633:89;:::o;10138:103::-;9349:13;:11;:13::i;:::-;10203:30:::1;10230:1;10203:18;:30::i;31051:161::-:0;31127:45;31143:7;7550:10;31166:5;31127:15;:45::i;:::-;31183:21;31189:7;31198:5;31183;:21::i;:::-;31051:161;;:::o;31545:61::-;9349:13;:11;:13::i;:::-;31590:8:::1;:6;:8::i;19667:95::-:0;19714:13;19747:7;19740:14;;;;;:::i;21044:182::-;21113:4;7550:10;21169:27;7550:10;21186:2;21190:5;21169:9;:27::i;10396:220::-;9349:13;:11;:13::i;:::-;-1:-1:-1;;;;;10481:22:0;::::1;10477:93;;10527:31;::::0;-1:-1:-1;;;10527:31:0;;10555:1:::1;10527:31;::::0;::::1;2422:51:1::0;2395:18;;10527:31:0::1;;;;;;;;10477:93;10580:28;10599:8;10580:18;:28::i;26577:130::-:0;26662:37;26671:5;26678:7;26687:5;26694:4;26662:8;:37::i;:::-;26577:130;;;:::o;28293:487::-;-1:-1:-1;;;;;21396:18:0;;;28393:24;21396:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;-1:-1:-1;;28460:37:0;;28456:317;;28537:5;28518:16;:24;28514:132;;;28570:60;;-1:-1:-1;;;28570:60:0;;-1:-1:-1;;;;;3354:32:1;;28570:60:0;;;3336:51:1;3403:18;;;3396:34;;;3446:18;;;3439:34;;;3309:18;;28570:60:0;3134:345:1;28514:132:0;28689:57;28698:5;28705:7;28733:5;28714:16;:24;28740:5;28689:8;:57::i;:::-;28382:398;28293:487;;;:::o;23152:308::-;-1:-1:-1;;;;;23236:18:0;;23232:88;;23278:30;;-1:-1:-1;;;23278:30:0;;23305:1;23278:30;;;2422:51:1;2395:18;;23278:30:0;2276:203:1;23232:88:0;-1:-1:-1;;;;;23334:16:0;;23330:88;;23374:32;;-1:-1:-1;;;23374:32:0;;23403:1;23374:32;;;2422:51:1;2395:18;;23374:32:0;2276:203:1;23330:88:0;23428:24;23436:4;23442:2;23446:5;23428:7;:24::i;9628:166::-;9536:6;;-1:-1:-1;;;;;9536:6:0;;;;;7550:10;9688:23;9684:103;;9735:40;;-1:-1:-1;;;9735:40:0;;7550:10;9735:40;;;2422:51:1;2395:18;;9735:40:0;2276:203:1;13777:120:0;12740:16;:14;:16::i;:::-;13836:7:::1;:15:::0;;-1:-1:-1;;13836:15:0::1;::::0;;13867:22:::1;7550:10:::0;13876:12:::1;13867:22;::::0;-1:-1:-1;;;;;2440:32:1;;;2422:51;;2410:2;2395:18;13867:22:0::1;;;;;;;13777:120::o:0;25813:211::-;-1:-1:-1;;;;;25884:21:0;;25880:91;;25929:30;;-1:-1:-1;;;25929:30:0;;25956:1;25929:30;;;2422:51:1;2395:18;;25929:30:0;2276:203:1;25880:91:0;25981:35;25989:7;26006:1;26010:5;25981:7;:35::i;10776:191::-;10869:6;;;-1:-1:-1;;;;;10886:17:0;;;10869:6;10886:17;;;-1:-1:-1;;;;;;10886:17:0;;;;;;10919:40;;10869:6;;;;;;;;10919:40;;10850:16;;10919:40;10839:128;10776:191;:::o;13518:118::-;12481:19;:17;:19::i;:::-;13578:7:::1;:14:::0;;-1:-1:-1;;13578:14:0::1;13588:4;13578:14;::::0;;13608:20:::1;13615:12;7550:10:::0;;7470:98;27558:443;-1:-1:-1;;;;;27671:19:0;;27667:91;;27714:32;;-1:-1:-1;;;27714:32:0;;27743:1;27714:32;;;2422:51:1;2395:18;;27714:32:0;2276:203:1;27667:91:0;-1:-1:-1;;;;;27772:21:0;;27768:92;;27817:31;;-1:-1:-1;;;27817:31:0;;27845:1;27817:31;;;2422:51:1;2395:18;;27817:31:0;2276:203:1;27768:92:0;-1:-1:-1;;;;;27870:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;:35;;;27916:78;;;;27967:7;-1:-1:-1;;;;;27951:31:0;27960:5;-1:-1:-1;;;;;27951:31:0;;27976:5;27951:31;;;;1342:25:1;;1330:2;1315:18;;1196:177;27951:31:0;;;;;;;;27558:443;;;;:::o;31687:170::-;31819:30;31833:4;31839:2;31843:5;31819:13;:30::i;13244:130::-;12947:7;;;;13303:64;;13340:15;;-1:-1:-1;;;13340:15:0;;;;;;;;;;;13035:132;12947:7;;;;13097:63;;;13133:15;;-1:-1:-1;;;13133:15:0;;;;;;;;;;;29884:147;12481:19;:17;:19::i;:::-;29993:30:::1;30007:4;30013:2;30017:5;-1:-1:-1::0;;;;;23874:18:0;;23870:552;;24028:5;24012:12;;:21;;;;;;;:::i;:::-;;;;-1:-1:-1;23870:552:0;;-1:-1:-1;23870:552:0;;-1:-1:-1;;;;;24088:15:0;;24066:19;24088:15;;;;;;;;;;;24122:19;;;24118:117;;;24169:50;;-1:-1:-1;;;24169:50:0;;-1:-1:-1;;;;;3354:32:1;;24169:50:0;;;3336:51:1;3403:18;;;3396:34;;;3446:18;;;3439:34;;;3309:18;;24169:50:0;3134:345:1;24118:117:0;-1:-1:-1;;;;;24358:15:0;;:9;:15;;;;;;;;;;24376:19;;;;24358:37;;23870:552;-1:-1:-1;;;;;24438:16:0;;24434:435;;24604:12;:21;;;;;;;24434:435;;;-1:-1:-1;;;;;24820:13:0;;:9;:13;;;;;;;;;;:22;;;;;;24434:435;24901:2;-1:-1:-1;;;;;24886:25:0;24895:4;-1:-1:-1;;;;;24886:25:0;;24905:5;24886:25;;;;1342::1;;1330:2;1315:18;;1196:177;24886:25:0;;;;;;;;23784:1135;;;:::o;14:548:1:-;126:4;155:2;184;173:9;166:21;216:6;210:13;259:6;254:2;243:9;239:18;232:34;284:1;294:140;308:6;305:1;302:13;294:140;;;403:14;;;399:23;;393:30;369:17;;;388:2;365:26;358:66;323:10;;294:140;;;298:3;483:1;478:2;469:6;458:9;454:22;450:31;443:42;553:2;546;542:7;537:2;529:6;525:15;521:29;510:9;506:45;502:54;494:62;;;;14:548;;;;:::o;567:173::-;635:20;;-1:-1:-1;;;;;684:31:1;;674:42;;664:70;;730:1;727;720:12;664:70;567:173;;;:::o;745:254::-;813:6;821;874:2;862:9;853:7;849:23;845:32;842:52;;;890:1;887;880:12;842:52;913:29;932:9;913:29;:::i;:::-;903:39;989:2;974:18;;;;961:32;;-1:-1:-1;;;745:254:1:o;1378:328::-;1455:6;1463;1471;1524:2;1512:9;1503:7;1499:23;1495:32;1492:52;;;1540:1;1537;1530:12;1492:52;1563:29;1582:9;1563:29;:::i;:::-;1553:39;;1611:38;1645:2;1634:9;1630:18;1611:38;:::i;:::-;1601:48;;1696:2;1685:9;1681:18;1668:32;1658:42;;1378:328;;;;;:::o;1900:180::-;1959:6;2012:2;2000:9;1991:7;1987:23;1983:32;1980:52;;;2028:1;2025;2018:12;1980:52;-1:-1:-1;2051:23:1;;1900:180;-1:-1:-1;1900:180:1:o;2085:186::-;2144:6;2197:2;2185:9;2176:7;2172:23;2168:32;2165:52;;;2213:1;2210;2203:12;2165:52;2236:29;2255:9;2236:29;:::i;:::-;2226:39;2085:186;-1:-1:-1;;;2085:186:1:o;2484:260::-;2552:6;2560;2613:2;2601:9;2592:7;2588:23;2584:32;2581:52;;;2629:1;2626;2619:12;2581:52;2652:29;2671:9;2652:29;:::i;:::-;2642:39;;2700:38;2734:2;2723:9;2719:18;2700:38;:::i;:::-;2690:48;;2484:260;;;;;:::o;2749:380::-;2828:1;2824:12;;;;2871;;;2892:61;;2946:4;2938:6;2934:17;2924:27;;2892:61;2999:2;2991:6;2988:14;2968:18;2965:38;2962:161;;3045:10;3040:3;3036:20;3033:1;3026:31;3080:4;3077:1;3070:15;3108:4;3105:1;3098:15;2962:161;;2749:380;;;:::o;3484:222::-;3549:9;;;3570:10;;;3567:133;;;3622:10;3617:3;3613:20;3610:1;3603:31;3657:4;3654:1;3647:15;3685:4;3682:1;3675:15

ipfs://6e678fcf7f4940c8aaae2ddf6ea301692f48b866eb2b9507fb5a848eb30712d1