Contract Diff Checker

Contract Name:
VariableDebtToken

Contract Source Code:

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;

import {IERC20} from './IERC20.sol';

interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity 0.8.10;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }

  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }

  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }

  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }

  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }

  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }

  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }

  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }

  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }

  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }

  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }

  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }

  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }

  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;

  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;

  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;

  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;

  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;

  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;

  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;

  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;

  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;

  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);

  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;

  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;

  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);

  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;

  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;

  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title ICreditDelegationToken
 * @author Aave
 * @notice Defines the basic interface for a token supporting credit delegation.
 */
interface ICreditDelegationToken {
  /**
   * @dev Emitted on `approveDelegation` and `borrowAllowance
   * @param fromUser The address of the delegator
   * @param toUser The address of the delegatee
   * @param asset The address of the delegated asset
   * @param amount The amount being delegated
   */
  event BorrowAllowanceDelegated(
    address indexed fromUser,
    address indexed toUser,
    address indexed asset,
    uint256 amount
  );

  /**
   * @notice Delegates borrowing power to a user on the specific debt token.
   * Delegation will still respect the liquidation constraints (even if delegated, a
   * delegatee cannot force a delegator HF to go below 1)
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The maximum amount being delegated.
   */
  function approveDelegation(address delegatee, uint256 amount) external;

  /**
   * @notice Returns the borrow allowance of the user
   * @param fromUser The user to giving allowance
   * @param toUser The user to give allowance to
   * @return The current allowance of `toUser`
   */
  function borrowAllowance(address fromUser, address toUser) external view returns (uint256);

  /**
   * @notice Delegates borrowing power to a user on the specific debt token via ERC712 signature
   * @param delegator The delegator of the credit
   * @param delegatee The delegatee that can use the credit
   * @param value The amount to be delegated
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v The V signature param
   * @param s The S signature param
   * @param r The R signature param
   */
  function delegationWithSig(
    address delegator,
    address delegatee,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableDebtToken
 * @author Aave
 * @notice Interface for the initialize function common between debt tokens
 */
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals The decimals of the debt token
   * @param debtTokenName The name of the debt token
   * @param debtTokenSymbol The symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the debt token.
   * @param pool The pool contract that is initializing this contract
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);

  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';

/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 */
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @notice Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return True if the previous balance of the user is 0, false otherwise
   * @return The scaled total debt of the reserve
   */
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool, uint256);

  /**
   * @notice Burns user variable debt
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the debt will be burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   * @return The scaled total debt of the reserve
   */
  function burn(address from, uint256 amount, uint256 index) external returns (uint256);

  /**
   * @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;

/**
 * @title VersionedInitializable
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 * @notice Helper contract to implement initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * @dev WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
abstract contract VersionedInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  uint256 private lastInitializedRevision = 0;

  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;

  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    uint256 revision = getRevision();
    require(
      initializing || isConstructor() || revision > lastInitializedRevision,
      'Contract instance has already been initialized'
    );

    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      lastInitializedRevision = revision;
    }

    _;

    if (isTopLevelCall) {
      initializing = false;
    }
  }

  /**
   * @notice Returns the revision number of the contract
   * @dev Needs to be defined in the inherited class as a constant.
   * @return The revision number
   */
  function getRevision() internal pure virtual returns (uint256);

  /**
   * @notice Returns true if and only if the function is running in the constructor
   * @return True if the function is running in the constructor
   */
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    uint256 cs;
    //solium-disable-next-line
    assembly {
      cs := extcodesize(address())
    }
    return cs == 0;
  }

  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;

  uint256 internal constant WAD_RAY_RATIO = 1e9;

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }

  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }

  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }

  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }

  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)

      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

import {IERC20} from '../../dependencies/openzeppelin/contracts/IERC20.sol';
import {SafeCast} from '../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {VersionedInitializable} from '../libraries/aave-upgradeability/VersionedInitializable.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {IPool} from '../../interfaces/IPool.sol';
import {IAaveIncentivesController} from '../../interfaces/IAaveIncentivesController.sol';
import {IInitializableDebtToken} from '../../interfaces/IInitializableDebtToken.sol';
import {IVariableDebtToken} from '../../interfaces/IVariableDebtToken.sol';
import {EIP712Base} from './base/EIP712Base.sol';
import {DebtTokenBase} from './base/DebtTokenBase.sol';
import {ScaledBalanceTokenBase} from './base/ScaledBalanceTokenBase.sol';

/**
 * @title VariableDebtToken
 * @author Aave
 * @notice Implements a variable debt token to track the borrowing positions of users
 * at variable rate mode
 * @dev Transfer and approve functionalities are disabled since its a non-transferable token
 */
contract VariableDebtToken is DebtTokenBase, ScaledBalanceTokenBase, IVariableDebtToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;

  uint256 public constant DEBT_TOKEN_REVISION = 0x1;

  /**
   * @dev Constructor.
   * @param pool The address of the Pool contract
   */
  constructor(
    IPool pool
  )
    DebtTokenBase()
    ScaledBalanceTokenBase(pool, 'VARIABLE_DEBT_TOKEN_IMPL', 'VARIABLE_DEBT_TOKEN_IMPL', 0)
  {
    // Intentionally left blank
  }

  /// @inheritdoc IInitializableDebtToken
  function initialize(
    IPool initializingPool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external override initializer {
    require(initializingPool == POOL, Errors.POOL_ADDRESSES_DO_NOT_MATCH);
    _setName(debtTokenName);
    _setSymbol(debtTokenSymbol);
    _setDecimals(debtTokenDecimals);

    _underlyingAsset = underlyingAsset;
    _incentivesController = incentivesController;

    _domainSeparator = _calculateDomainSeparator();

    emit Initialized(
      underlyingAsset,
      address(POOL),
      address(incentivesController),
      debtTokenDecimals,
      debtTokenName,
      debtTokenSymbol,
      params
    );
  }

  /// @inheritdoc VersionedInitializable
  function getRevision() internal pure virtual override returns (uint256) {
    return DEBT_TOKEN_REVISION;
  }

  /// @inheritdoc IERC20
  function balanceOf(address user) public view virtual override returns (uint256) {
    uint256 scaledBalance = super.balanceOf(user);

    if (scaledBalance == 0) {
      return 0;
    }

    return scaledBalance.rayMul(POOL.getReserveNormalizedVariableDebt(_underlyingAsset));
  }

  /// @inheritdoc IVariableDebtToken
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool returns (bool, uint256) {
    if (user != onBehalfOf) {
      _decreaseBorrowAllowance(onBehalfOf, user, amount);
    }
    return (_mintScaled(user, onBehalfOf, amount, index), scaledTotalSupply());
  }

  /// @inheritdoc IVariableDebtToken
  function burn(
    address from,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool returns (uint256) {
    _burnScaled(from, address(0), amount, index);
    return scaledTotalSupply();
  }

  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return super.totalSupply().rayMul(POOL.getReserveNormalizedVariableDebt(_underlyingAsset));
  }

  /// @inheritdoc EIP712Base
  function _EIP712BaseId() internal view override returns (string memory) {
    return name();
  }

  /**
   * @dev Being non transferrable, the debt token does not implement any of the
   * standard ERC20 functions for transfer and allowance.
   */
  function transfer(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  function allowance(address, address) external view virtual override returns (uint256) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  function approve(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  function transferFrom(address, address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  function increaseAllowance(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  function decreaseAllowance(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }

  /// @inheritdoc IVariableDebtToken
  function UNDERLYING_ASSET_ADDRESS() external view override returns (address) {
    return _underlyingAsset;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {VersionedInitializable} from '../../libraries/aave-upgradeability/VersionedInitializable.sol';
import {ICreditDelegationToken} from '../../../interfaces/ICreditDelegationToken.sol';
import {EIP712Base} from './EIP712Base.sol';

/**
 * @title DebtTokenBase
 * @author Aave
 * @notice Base contract for different types of debt tokens, like StableDebtToken or VariableDebtToken
 */
abstract contract DebtTokenBase is
  VersionedInitializable,
  EIP712Base,
  Context,
  ICreditDelegationToken
{
  // Map of borrow allowances (delegator => delegatee => borrowAllowanceAmount)
  mapping(address => mapping(address => uint256)) internal _borrowAllowances;

  // Credit Delegation Typehash
  bytes32 public constant DELEGATION_WITH_SIG_TYPEHASH =
    keccak256('DelegationWithSig(address delegatee,uint256 value,uint256 nonce,uint256 deadline)');

  address internal _underlyingAsset;

  /**
   * @dev Constructor.
   */
  constructor() EIP712Base() {
    // Intentionally left blank
  }

  /// @inheritdoc ICreditDelegationToken
  function approveDelegation(address delegatee, uint256 amount) external override {
    _approveDelegation(_msgSender(), delegatee, amount);
  }

  /// @inheritdoc ICreditDelegationToken
  function delegationWithSig(
    address delegator,
    address delegatee,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external {
    require(delegator != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    //solium-disable-next-line
    require(block.timestamp <= deadline, Errors.INVALID_EXPIRATION);
    uint256 currentValidNonce = _nonces[delegator];
    bytes32 digest = keccak256(
      abi.encodePacked(
        '\x19\x01',
        DOMAIN_SEPARATOR(),
        keccak256(
          abi.encode(DELEGATION_WITH_SIG_TYPEHASH, delegatee, value, currentValidNonce, deadline)
        )
      )
    );
    require(delegator == ecrecover(digest, v, r, s), Errors.INVALID_SIGNATURE);
    _nonces[delegator] = currentValidNonce + 1;
    _approveDelegation(delegator, delegatee, value);
  }

  /// @inheritdoc ICreditDelegationToken
  function borrowAllowance(
    address fromUser,
    address toUser
  ) external view override returns (uint256) {
    return _borrowAllowances[fromUser][toUser];
  }

  /**
   * @notice Updates the borrow allowance of a user on the specific debt token.
   * @param delegator The address delegating the borrowing power
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The allowance amount being delegated.
   */
  function _approveDelegation(address delegator, address delegatee, uint256 amount) internal {
    _borrowAllowances[delegator][delegatee] = amount;
    emit BorrowAllowanceDelegated(delegator, delegatee, _underlyingAsset, amount);
  }

  /**
   * @notice Decreases the borrow allowance of a user on the specific debt token.
   * @param delegator The address delegating the borrowing power
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The amount to subtract from the current allowance
   */
  function _decreaseBorrowAllowance(address delegator, address delegatee, uint256 amount) internal {
    uint256 newAllowance = _borrowAllowances[delegator][delegatee] - amount;

    _borrowAllowances[delegator][delegatee] = newAllowance;

    emit BorrowAllowanceDelegated(delegator, delegatee, _underlyingAsset, newAllowance);
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

/**
 * @title EIP712Base
 * @author Aave
 * @notice Base contract implementation of EIP712.
 */
abstract contract EIP712Base {
  bytes public constant EIP712_REVISION = bytes('1');
  bytes32 internal constant EIP712_DOMAIN =
    keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)');

  // Map of address nonces (address => nonce)
  mapping(address => uint256) internal _nonces;

  bytes32 internal _domainSeparator;
  uint256 internal immutable _chainId;

  /**
   * @dev Constructor.
   */
  constructor() {
    _chainId = block.chainid;
  }

  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
    if (block.chainid == _chainId) {
      return _domainSeparator;
    }
    return _calculateDomainSeparator();
  }

  /**
   * @notice Returns the nonce value for address specified as parameter
   * @param owner The address for which the nonce is being returned
   * @return The nonce value for the input address`
   */
  function nonces(address owner) public view virtual returns (uint256) {
    return _nonces[owner];
  }

  /**
   * @notice Compute the current domain separator
   * @return The domain separator for the token
   */
  function _calculateDomainSeparator() internal view returns (bytes32) {
    return
      keccak256(
        abi.encode(
          EIP712_DOMAIN,
          keccak256(bytes(_EIP712BaseId())),
          keccak256(EIP712_REVISION),
          block.chainid,
          address(this)
        )
      );
  }

  /**
   * @notice Returns the user readable name of signing domain (e.g. token name)
   * @return The name of the signing domain
   */
  function _EIP712BaseId() internal view virtual returns (string memory);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';

/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;

  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }

  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }

  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment. StableDebtTokens use
   * this field to store the user's stable rate.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;

  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;

  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(IPool pool, string memory name, string memory symbol, uint8 decimals) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name;
    _symbol = symbol;
    _decimals = decimals;
    POOL = pool;
  }

  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }

  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }

  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }

  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }

  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }

  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }

  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }

  /// @inheritdoc IERC20
  function allowance(
    address owner,
    address spender
  ) external view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }

  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }

  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }

  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(address sender, address recipient, uint128 amount) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;

    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }

  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }

  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }

  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IncentivizedERC20} from './IncentivizedERC20.sol';

/**
 * @title MintableIncentivizedERC20
 * @author Aave
 * @notice Implements mint and burn functions for IncentivizedERC20
 */
abstract contract MintableIncentivizedERC20 is IncentivizedERC20 {
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) IncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }

  /**
   * @notice Mints tokens to an account and apply incentives if defined
   * @param account The address receiving tokens
   * @param amount The amount of tokens to mint
   */
  function _mint(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply + amount;

    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance + amount;

    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }

  /**
   * @notice Burns tokens from an account and apply incentives if defined
   * @param account The account whose tokens are burnt
   * @param amount The amount of tokens to burn
   */
  function _burn(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply - amount;

    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance - amount;

    IAaveIncentivesController incentivesControllerLocal = _incentivesController;

    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;

import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {MintableIncentivizedERC20} from './MintableIncentivizedERC20.sol';

/**
 * @title ScaledBalanceTokenBase
 * @author Aave
 * @notice Basic ERC20 implementation of scaled balance token
 */
abstract contract ScaledBalanceTokenBase is MintableIncentivizedERC20, IScaledBalanceToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;

  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) MintableIncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }

  /// @inheritdoc IScaledBalanceToken
  function scaledBalanceOf(address user) external view override returns (uint256) {
    return super.balanceOf(user);
  }

  /// @inheritdoc IScaledBalanceToken
  function getScaledUserBalanceAndSupply(
    address user
  ) external view override returns (uint256, uint256) {
    return (super.balanceOf(user), super.totalSupply());
  }

  /// @inheritdoc IScaledBalanceToken
  function scaledTotalSupply() public view virtual override returns (uint256) {
    return super.totalSupply();
  }

  /// @inheritdoc IScaledBalanceToken
  function getPreviousIndex(address user) external view virtual override returns (uint256) {
    return _userState[user].additionalData;
  }

  /**
   * @notice Implements the basic logic to mint a scaled balance token.
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the scaled tokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function _mintScaled(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) internal returns (bool) {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_MINT_AMOUNT);

    uint256 scaledBalance = super.balanceOf(onBehalfOf);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[onBehalfOf].additionalData);

    _userState[onBehalfOf].additionalData = index.toUint128();

    _mint(onBehalfOf, amountScaled.toUint128());

    uint256 amountToMint = amount + balanceIncrease;
    emit Transfer(address(0), onBehalfOf, amountToMint);
    emit Mint(caller, onBehalfOf, amountToMint, balanceIncrease, index);

    return (scaledBalance == 0);
  }

  /**
   * @notice Implements the basic logic to burn a scaled balance token.
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param user The user which debt is burnt
   * @param target The address that will receive the underlying, if any
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   */
  function _burnScaled(address user, address target, uint256 amount, uint256 index) internal {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_BURN_AMOUNT);

    uint256 scaledBalance = super.balanceOf(user);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[user].additionalData);

    _userState[user].additionalData = index.toUint128();

    _burn(user, amountScaled.toUint128());

    if (balanceIncrease > amount) {
      uint256 amountToMint = balanceIncrease - amount;
      emit Transfer(address(0), user, amountToMint);
      emit Mint(user, user, amountToMint, balanceIncrease, index);
    } else {
      uint256 amountToBurn = amount - balanceIncrease;
      emit Transfer(user, address(0), amountToBurn);
      emit Burn(user, target, amountToBurn, balanceIncrease, index);
    }
  }

  /**
   * @notice Implements the basic logic to transfer scaled balance tokens between two users
   * @dev It emits a mint event with the interest accrued per user
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   * @param index The next liquidity index of the reserve
   */
  function _transfer(address sender, address recipient, uint256 amount, uint256 index) internal {
    uint256 senderScaledBalance = super.balanceOf(sender);
    uint256 senderBalanceIncrease = senderScaledBalance.rayMul(index) -
      senderScaledBalance.rayMul(_userState[sender].additionalData);

    uint256 recipientScaledBalance = super.balanceOf(recipient);
    uint256 recipientBalanceIncrease = recipientScaledBalance.rayMul(index) -
      recipientScaledBalance.rayMul(_userState[recipient].additionalData);

    _userState[sender].additionalData = index.toUint128();
    _userState[recipient].additionalData = index.toUint128();

    super._transfer(sender, recipient, amount.rayDiv(index).toUint128());

    if (senderBalanceIncrease > 0) {
      emit Transfer(address(0), sender, senderBalanceIncrease);
      emit Mint(_msgSender(), sender, senderBalanceIncrease, senderBalanceIncrease, index);
    }

    if (sender != recipient && recipientBalanceIncrease > 0) {
      emit Transfer(address(0), recipient, recipientBalanceIncrease);
      emit Mint(_msgSender(), recipient, recipientBalanceIncrease, recipientBalanceIncrease, index);
    }

    emit Transfer(sender, recipient, amount);
  }
}

Please enter a contract address above to load the contract details and source code.

Context size (optional):