Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Pausable} from "@openzeppelin/contracts/utils/Pausable.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IHEU} from "./interfaces/IHEU.sol";
import {IStHEU} from "./interfaces/IStHEU.sol";

/**
 * @title StHEU
 * @notice Staking token that can accumulate external yield,
 *         while letting some users "vest" their tokens (stop earning yield)
 *         without leaving leftover "unclaimed" yield in the contract.
 * @dev Key Points:
 * 1) **Burn on Vest**: When a user vests N stHEU, we burn those N stHEU from
 *    total supply immediately. We record how many underlying HEU they're owed
 *    (stHeuAmount * currentExchangeRate).
 * 2) Because vested tokens are removed from supply, any new yield added later
 *    only benefits the remaining non‐vested tokens.
 * 3) If user cancels the vest before it finishes, we effectively "undo" it:
 *    we re‐mint the same stHEU they gave up, at the same ratio they vested.
 * 4) Slashing and forced vest cancellation logic remain possible for the admin.
 */
contract StHEU is ERC20, IStHEU, Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IHEU;
    using SafeERC20 for IERC20;

    /// @dev The underlying token
    IHEU public immutable heu;

    /// @dev Whether the contract is in "migration mode"
    bool public migrationMode;

    /// @dev The default vesting duration
    uint256 public vestPeriod = 30 days;

    /**
     * @dev vestInfo[user][id] => VestInfo
     */
    mapping(address => mapping(uint256 => VestInfo)) public vestInfo;

    /**
     * @dev track the number of vests for each user
     */
    mapping(address => uint256) public vestCount;

    /**
     * @dev Tracks how many HEU are actively backing the current stHEU supply
     *      (excludes amounts owed to already-burned stHEU that is vesting).
     */
    uint256 public totalHeuInContract;

    // ----------------------------------------------------------
    //                     Constructor
    // ----------------------------------------------------------

    constructor(
        address heu_
    ) ERC20("Staked Heurist Token", "stHEU") Ownable(msg.sender) {
        if (heu_ == address(0)) {
            revert StHEU__InvalidHEUAddress();
        }
        heu = IHEU(heu_);
    }

    // ----------------------------------------------------------
    //                     Admin Functions
    // ----------------------------------------------------------

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    function setMigrationMode(bool status) external onlyOwner {
        migrationMode = status;
        emit SetMigrationMode(status);
    }

    function setVestPeriod(uint256 newPeriod) external onlyOwner {
        if (newPeriod == 0) {
            revert StHEU__InvalidAmount();
        }
        vestPeriod = newPeriod;
        emit SetVestPeriod(newPeriod);
    }

    /**
     * @notice Add yield into this contract. We increase totalHeuInContract
     *         because this new yield is now backing the stHEU supply.
     */
    function accumulateYield(
        uint256 amount
    ) external nonReentrant whenNotPaused {
        if (amount == 0) {
            revert StHEU__InvalidAmount();
        }
        // Transfer yield from admin (or yield distributor) to contract
        heu.safeTransferFrom(msg.sender, address(this), amount);
        totalHeuInContract += amount;
        emit YieldAccumulated(amount);
    }

    /**
     * @notice Slash stHEU from a user's *liquid* balance, transferring the underlying
     *         to the admin.
     * @param user The user to slash.
     * @param stHeuAmount The amount of stHEU to remove from user's liquid balance.
     */
    function slash(
        address user,
        uint256 stHeuAmount
    ) external nonReentrant whenNotPaused onlyOwner {
        if (stHeuAmount == 0) {
            revert StHEU__InvalidAmount();
        }
        uint256 balance = balanceOf(user);
        if (balance < stHeuAmount) {
            revert StHEU__InsufficientBalance();
        }

        // 1. Calculate underlying amount using current exchange rate BEFORE burning
        uint256 rate = _exchangeRate();
        uint256 underlying = (stHeuAmount * rate) / 1e18;
        if (underlying > totalHeuInContract) {
            revert StHEU__InsufficientBackingBalance();
        }

        // 2. Burn the stHEU tokens
        _burn(user, stHeuAmount);

        // 3. Update totalHeuInContract and transfer underlying
        totalHeuInContract -= underlying;
        heu.safeTransfer(owner(), underlying);

        emit Slash(user, stHeuAmount, underlying);
    }

    /**
     * @notice Admin forcibly cancels a user's vest, confiscating the underlying owed
     *         and leaving the user with nothing for that vest.
     * @param user The user whose vest is canceled.
     * @param vestId The ID of the user's vest to cancel.
     */
    function adminCancelVest(
        address user,
        uint256 vestId
    ) external nonReentrant whenNotPaused onlyOwner {
        VestInfo storage info = vestInfo[user][vestId];
        if (info.underlyingOwed == 0) {
            revert StHEU__VestDoesNotExist();
        }

        // Transfer the underlying owed from contract to admin
        uint256 amount = info.underlyingOwed;
        heu.safeTransfer(owner(), amount);

        // Clear the vest record
        delete vestInfo[user][vestId];

        emit AdminCancelVest(user, vestId, amount);
    }

    /**
     * @notice Prevent renouncing ownership
     */
    function renounceOwnership() public view override onlyOwner {
        revert StHEU__RenounceOwnershipNotAllowed();
    }

    // ----------------------------------------------------------
    //                     User Functions
    // ----------------------------------------------------------

    /**
     * @notice Lock HEU in exchange for stHEU minted at current exchange rate
     * @param amount The amount of HEU to stake
     * @dev Reverts if in migration mode or amount is zero
     */
    function lock(uint256 amount) external nonReentrant whenNotPaused {
        if (migrationMode) {
            revert StHEU__MigrationModeActive();
        }
        if (amount == 0) {
            revert StHEU__InvalidAmount();
        }

        // Mint stHEU to user: minted = deposit / exchangeRate
        uint256 rate = _exchangeRate();

        // Transfer user's HEU to contract
        heu.safeTransferFrom(msg.sender, address(this), amount);

        // Increase active backing
        totalHeuInContract += amount;

        // Mint stHEU to user
        uint256 stHeuToMint = (amount * 1e18) / rate;

        _mint(msg.sender, stHeuToMint);

        emit Lock(msg.sender, amount, stHeuToMint);
    }

    /**
     * @notice Vest stHEU. This will burn the user's stHEU from supply and record how
     *         many underlying HEU they are owed (locking the exchange rate).
     * @param stHeuAmount The amount of stHEU the user is vesting.
     * @return vestId The new vest ID for the user.
     */
    function vest(
        uint256 stHeuAmount
    ) external nonReentrant whenNotPaused returns (uint256 vestId) {
        if (stHeuAmount == 0) {
            revert StHEU__InvalidAmount();
        }

        uint256 balance = balanceOf(msg.sender);
        if (balance < stHeuAmount) {
            revert StHEU__InsufficientBalance();
        }

        // Calculate underlying before burning
        uint256 currentRate = _exchangeRate();
        uint256 underlying = (stHeuAmount * currentRate) / 1e18;
        if (underlying > totalHeuInContract) {
            revert StHEU__InsufficientBackingBalance();
        }

        // Record vest info
        vestId = vestCount[msg.sender]++;
        uint256 _end = block.timestamp + vestPeriod;

        vestInfo[msg.sender][vestId] = VestInfo({
            underlyingOwed: underlying,
            end: _end,
            ratioAtVest: currentRate
        });

        // Remove from active backing and burn stHEU
        totalHeuInContract -= underlying;
        _burn(msg.sender, stHeuAmount);

        emit VestStart(msg.sender, vestId, stHeuAmount, underlying, _end);
    }

    /**
     * @notice Cancel an ongoing vest, returning the original stHEU to the user
     *         (undoing the vest).
     * @param vestId The vest ID to cancel.
     */
    function cancelVest(uint256 vestId) external nonReentrant whenNotPaused {
        VestInfo storage info = vestInfo[msg.sender][vestId];
        uint256 underlying = info.underlyingOwed;
        if (underlying == 0) {
            revert StHEU__VestDoesNotExist();
        }

        // Calculate stHEU amount to re-mint
        uint256 stHeuAmount = (underlying * 1e18) / info.ratioAtVest;

        // Put underlying back into active backing
        totalHeuInContract += underlying;

        // Re-mint stHEU to user
        _mint(msg.sender, stHeuAmount);

        // Clear vest info
        delete vestInfo[msg.sender][vestId];

        emit CancelVest(msg.sender, vestId, stHeuAmount);
    }

    /**
     * @notice Claim the vested underlying HEU after the vest is finished.
     * @param vestId The ID of the user's vest to claim.
     * @return amount The amount of HEU paid out.
     */
    function claim(
        uint256 vestId
    ) external nonReentrant whenNotPaused returns (uint256 amount) {
        amount = _claimVest(msg.sender, vestId);
        emit Claim(msg.sender, vestId, amount);
    }

    /**
     * @notice Returns how much HEU a user could claim from a vest, *if* it is finished.
     *         If not finished, the user can't actually claim yet (unless migrationMode).
     */
    function claimableAmount(
        address user,
        uint256 vestId
    ) external view returns (uint256) {
        VestInfo memory info = vestInfo[user][vestId];
        return info.underlyingOwed;
    }

    function emergencyWithdraw(
        address tokenAddress,
        uint256 amount
    ) external onlyOwner {
        IERC20(tokenAddress).safeTransfer(owner(), amount);
        emit EmergencyWithdraw(tokenAddress, amount);
    }

    // ----------------------------------------------------------
    //                     Internal Helpers
    // ----------------------------------------------------------

    /**
     * @dev Core logic for claiming a vest. Used in `claim`.
     */
    function _claimVest(
        address user,
        uint256 vestId
    ) internal returns (uint256) {
        VestInfo storage info = vestInfo[user][vestId];
        uint256 amount = info.underlyingOwed;
        if (amount == 0) {
            revert StHEU__VestDoesNotExist();
        }
        // require vest to be finished or migrationMode is on
        if (!migrationMode && block.timestamp < info.end) {
            revert StHEU__VestNotFinished();
        }

        // pay out the underlying
        heu.safeTransfer(user, amount);

        // remove vest record
        delete vestInfo[user][vestId];

        return amount;
    }

    /**
     * @notice Compute the current exchange rate: total HEU in contract / total stHEU supply
     * @dev Both in same decimals. We'll treat it as 1e18 precision. If no supply or no HEU,
     *      default ratio = 1e18 for the sake of new deposits
     * @return uint256 The current exchange rate
     */
    function _exchangeRate() internal view returns (uint256) {
        uint256 stHeuSupply = totalSupply();
        uint256 backing = totalHeuInContract;
        if (stHeuSupply == 0 || backing == 0) {
            return 1e18;
        }
        return (backing * 1e18) / stHeuSupply;
    }

    /// @notice Returns current exchange rate between HEU and stHEU
    function exchangeRate() external view returns (uint256) {
        return _exchangeRate();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";

interface IHEU is IERC20 {
    function mint(address recipient, uint256 amount) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IStHEUEvents} from "./IStHEUEvents.sol";
import {IHEU} from "./IHEU.sol";

interface IStHEU is IERC20, IStHEUEvents {
    /// TYPES ///

    /**
     * @notice Each vest stores how many underlying HEU are owed to the user,
     *         the vest end time, and the ratio at vest time for cancellation logic.
     */
    struct VestInfo {
        uint256 underlyingOwed; // total HEU owed if claimed
        uint256 end; // vest end timestamp
        uint256 ratioAtVest; // exchange rate at vest (for cancel re-mint)
    }

    /// ERRORS ///

    error StHEU__InvalidHEUAddress();
    error StHEU__RenounceOwnershipNotAllowed();
    error StHEU__InvalidAmount();
    error StHEU__VestDoesNotExist();
    error StHEU__VestNotFinished();
    error StHEU__MigrationModeActive();
    error StHEU__VestingNotAllowedInMigrationMode();
    error StHEU__InsufficientBalance();
    error StHEU__InsufficientBackingBalance();

    /// Functions ///

    // Add missing functions from StHEU.sol
    function heu() external view returns (IHEU);
    function migrationMode() external view returns (bool);
    function vestPeriod() external view returns (uint256);
    function vestInfo(address user, uint256 vestId) external view returns (uint256, uint256, uint256);
    function vestCount(address user) external view returns (uint256);
    
    function accumulateYield(uint256 amount) external;
    function slash(address user, uint256 stHeuAmount) external;
    function adminCancelVest(address user, uint256 vestId) external;

    /// @notice Pause StHEU contract.
    function pause() external;

    /// @notice Resume StHEU contract.
    function unpause() external;

    /// @notice Set status of migration mode.
    /// @param status New status of migration mode.
    function setMigrationMode(bool status) external;

    /// @notice Set period for vesting.
    /// @param newPeriod Period of vesting.
    function setVestPeriod(uint256 newPeriod) external;

    /// @notice Lock HEU token to get stHEU.
    /// @param amount The amount of HEU to lock.
    function lock(uint256 amount) external;

    /// @notice Vest stHEU token to get HEU.
    /// @param amount The amount of stHEU to vest.
    /// @return id The id of new vesting.
    function vest(uint256 amount) external returns (uint256 id);

    /// @notice Cancel the vesting for given id.
    /// @param id The id of the vesting.
    function cancelVest(uint256 id) external;

    /// @notice Claim HEU token from stHEU.
    /// @param id The id of the vesting.
    /// @return heuAmount The claimed amount of HEU.
    function claim(uint256 id) external returns (uint256 heuAmount);

    /// @notice Return estimated amount of HEU token for claim.
    /// @param user The user address to check
    /// @param vestId The id of the vesting.
    /// @return heuAmount The estimated amount of HEU.
    function claimableAmount(address user, uint256 vestId)
        external
        view
        returns (uint256 heuAmount);

    /// @notice Returns exchange rate between HEU and stHEU.
    /// @return Exchange rate between HEU and stHEU.
    function exchangeRate() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/// @title Interface for StHEU contract events.
interface IStHEUEvents {
    /// @notice Emitted when status of migration mode is updated.
    /// @param status New status of migration mode.
    event SetMigrationMode(bool status);

    /// @notice Emitted when new period is set for vesting.
    /// @param newPeriod Period of vesting.
    event SetVestPeriod(uint256 newPeriod);

    /// @notice Emitted when yield is accumulated in the contract
    /// @param amount The amount of HEU added as yield
    event YieldAccumulated(uint256 amount);

    /// @notice Emitted when HEU is locked for stHEU
    /// @param user The address locking HEU
    /// @param amount The amount of HEU locked
    /// @param stHeuAmount The amount of stHEU minted
    event Lock(address indexed user, uint256 amount, uint256 stHeuAmount);

    /// @notice Emitted when stHEU is vested
    /// @param user The address starting the vest
    /// @param vestId The ID of the vest
    /// @param stHeuAmount The amount of stHEU vested
    /// @param underlyingAmount The amount of underlying HEU owed
    /// @param endTime The timestamp when the vest ends
    event VestStart(
        address indexed user,
        uint256 vestId,
        uint256 stHeuAmount,
        uint256 underlyingAmount,
        uint256 endTime
    );

    /// @notice Emitted when a vest is canceled by the user
    /// @param user The address canceling the vest
    /// @param vestId The ID of the canceled vest
    /// @param stHeuAmount The amount of stHEU returned
    event CancelVest(address indexed user, uint256 vestId, uint256 stHeuAmount);

    /// @notice Emitted when HEU is claimed from a completed vest
    /// @param user The address claiming HEU
    /// @param vestId The ID of the claimed vest
    /// @param amount The amount of HEU claimed
    event Claim(address indexed user, uint256 vestId, uint256 amount);

    /// @notice Emitted when stHEU is slashed from a user
    /// @param user The address being slashed
    /// @param stHeuAmount The amount of stHEU slashed
    /// @param underlyingAmount The amount of underlying HEU taken
    event Slash(address indexed user, uint256 stHeuAmount, uint256 underlyingAmount);

    /// @notice Emitted when admin cancels a user's vest
    /// @param user The address whose vest was canceled
    /// @param vestId The ID of the canceled vest
    /// @param amount The amount of underlying HEU taken
    event AdminCancelVest(address indexed user, uint256 vestId, uint256 amount);

    /// @notice Emitted when admin withdraws tokens from the contract
    /// @param tokenAddress The address of the token withdrawn
    /// @param amount The amount of tokens withdrawn
    event EmergencyWithdraw(address indexed tokenAddress, uint256 amount);
}

{
  "remappings": [
    "src/=src/",
    "test/=test/",
    "remappings /= [\"@openzeppelin/=lib/openzeppelin-contracts/\", \"@openzeppelin-upgradeable/=lib/openzeppelin-contracts-upgradeable/\", \"ds-test/=lib/forge-std/lib/ds-test/src/\", \"forge-std/=lib/forge-std/src/\"]/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@openzeppelin-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"heu_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"StHEU__InsufficientBackingBalance","type":"error"},{"inputs":[],"name":"StHEU__InsufficientBalance","type":"error"},{"inputs":[],"name":"StHEU__InvalidAmount","type":"error"},{"inputs":[],"name":"StHEU__InvalidHEUAddress","type":"error"},{"inputs":[],"name":"StHEU__MigrationModeActive","type":"error"},{"inputs":[],"name":"StHEU__RenounceOwnershipNotAllowed","type":"error"},{"inputs":[],"name":"StHEU__VestDoesNotExist","type":"error"},{"inputs":[],"name":"StHEU__VestNotFinished","type":"error"},{"inputs":[],"name":"StHEU__VestingNotAllowedInMigrationMode","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"vestId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"AdminCancelVest","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"vestId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"stHeuAmount","type":"uint256"}],"name":"CancelVest","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"vestId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Claim","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"stHeuAmount","type":"uint256"}],"name":"Lock","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"status","type":"bool"}],"name":"SetMigrationMode","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newPeriod","type":"uint256"}],"name":"SetVestPeriod","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"stHeuAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"underlyingAmount","type":"uint256"}],"name":"Slash","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"vestId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"stHeuAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"underlyingAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"endTime","type":"uint256"}],"name":"VestStart","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"YieldAccumulated","type":"event"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"accumulateYield","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"vestId","type":"uint256"}],"name":"adminCancelVest","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"vestId","type":"uint256"}],"name":"cancelVest","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"vestId","type":"uint256"}],"name":"claim","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"vestId","type":"uint256"}],"name":"claimableAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"exchangeRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"heu","outputs":[{"internalType":"contract IHEU","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"lock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"migrationMode","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"status","type":"bool"}],"name":"setMigrationMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newPeriod","type":"uint256"}],"name":"setVestPeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"stHeuAmount","type":"uint256"}],"name":"slash","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalHeuInContract","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"stHeuAmount","type":"uint256"}],"name":"vest","outputs":[{"internalType":"uint256","name":"vestId","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"vestCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"vestInfo","outputs":[{"internalType":"uint256","name":"underlyingOwed","type":"uint256"},{"internalType":"uint256","name":"end","type":"uint256"},{"internalType":"uint256","name":"ratioAtVest","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vestPeriod","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000ef22cb48b8483df6152e1423b19df5553bbd818b

-----Decoded View---------------
Arg [0] : heu_ (address): 0xEF22cb48B8483dF6152e1423b19dF5553BbD818b

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000ef22cb48b8483df6152e1423b19df5553bbd818b