// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {ICoin, PoolConfiguration} from "./interfaces/ICoin.sol";
import {ICoinComments} from "./interfaces/ICoinComments.sol";
import {IERC7572} from "./interfaces/IERC7572.sol";
import {IUniswapV3Factory} from "./interfaces/IUniswapV3Factory.sol";
import {IUniswapV3Pool} from "./interfaces/IUniswapV3Pool.sol";
import {ISwapRouter} from "./interfaces/ISwapRouter.sol";
import {IAirlock} from "./interfaces/IAirlock.sol";
import {IProtocolRewards} from "./interfaces/IProtocolRewards.sol";
import {IWETH} from "./interfaces/IWETH.sol";

import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ERC20PermitUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import {ReentrancyGuardUpgradeable} from "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ContractVersionBase} from "./version/ContractVersionBase.sol";
import {CoinConstants} from "./utils/CoinConstants.sol";
import {MultiOwnable} from "./utils/MultiOwnable.sol";
import {FullMath} from "./utils/uniswap/FullMath.sol";
import {TickMath} from "./utils/uniswap/TickMath.sol";
import {LiquidityAmounts} from "./utils/uniswap/LiquidityAmounts.sol";
import {CoinSetup} from "./libs/CoinSetup.sol";
import {MarketConstants} from "./libs/MarketConstants.sol";
import {LpPosition} from "./types/LpPosition.sol";
import {PoolState} from "./types/PoolState.sol";

/*
     $$$$$$\   $$$$$$\  $$$$$$\ $$\   $$\ 
    $$  __$$\ $$  __$$\ \_$$  _|$$$\  $$ |
    $$ /  \__|$$ /  $$ |  $$ |  $$$$\ $$ |
    $$ |      $$ |  $$ |  $$ |  $$ $$\$$ |
    $$ |      $$ |  $$ |  $$ |  $$ \$$$$ |
    $$ |  $$\ $$ |  $$ |  $$ |  $$ |\$$$ |
    \$$$$$$  | $$$$$$  |$$$$$$\ $$ | \$$ |
     \______/  \______/ \______|\__|  \__|
*/
contract Coin is ICoin, CoinConstants, ContractVersionBase, ERC20PermitUpgradeable, MultiOwnable, ReentrancyGuardUpgradeable {
    using SafeERC20 for IERC20;

    /// @notice The address of the WETH contract
    address public immutable WETH;
    /// @notice The address of the Uniswap V3 factory
    address public immutable v3Factory;
    /// @notice The address of the Uniswap V3 swap router
    address public immutable swapRouter;
    /// @notice The address of the Airlock contract, ownership is used for a protocol fee split.
    address public immutable airlock;
    /// @notice The address of the protocol rewards contract
    address public immutable protocolRewards;
    /// @notice The address of the protocol reward recipient
    address public immutable protocolRewardRecipient;

    /// @notice The metadata URI
    string public tokenURI;
    /// @notice The address of the coin creator
    address public payoutRecipient;
    /// @notice The address of the platform referrer
    address public platformReferrer;
    /// @notice The address of the Uniswap V3 pool
    address public poolAddress;
    /// @notice The address of the currency
    address public currency;

    PoolConfiguration public poolConfiguration;

    /// @notice Returns the state of the pool
    /// @dev This is a legacy function for compatibility with doppler default state
    /// @return asset The address of the asset
    /// @return numeraire The address of the numeraire
    /// @return tickLower The lower tick
    /// @return tickUpper The upper tick
    /// @return numPositions The number of discovery positions
    /// @return isInitialized Whether the pool is initialized
    /// @return isExited Whether the pool is exited
    /// @return maxShareToBeSold The maximum share to be sold
    /// @return totalTokensOnBondingCurve The total tokens on the bonding curve
    function poolState()
        external
        view
        returns (
            address asset,
            address numeraire,
            int24 tickLower,
            int24 tickUpper,
            uint16 numPositions,
            bool isInitialized,
            bool isExited,
            uint256 maxShareToBeSold,
            uint256 totalTokensOnBondingCurve
        )
    {
        asset = address(this);
        numeraire = currency;
        tickLower = poolConfiguration.tickLower;
        tickUpper = poolConfiguration.tickUpper;
        numPositions = poolConfiguration.numPositions;
        isInitialized = true;
        isExited = false;
        maxShareToBeSold = poolConfiguration.maxDiscoverySupplyShare;
        totalTokensOnBondingCurve = POOL_LAUNCH_SUPPLY;
    }

    /**
     * @notice The constructor for the static Coin contract deployment shared across all Coins.
     * @param _protocolRewardRecipient The address of the protocol reward recipient
     * @param _protocolRewards The address of the protocol rewards contract
     * @param _weth The address of the WETH contract
     * @param _v3Factory The address of the Uniswap V3 factory
     * @param _swapRouter The address of the Uniswap V3 swap router
     * @param _airlock The address of the Airlock contract, ownership is used for a protocol fee split.
     */
    constructor(
        address _protocolRewardRecipient,
        address _protocolRewards,
        address _weth,
        address _v3Factory,
        address _swapRouter,
        address _airlock
    ) initializer {
        if (_protocolRewardRecipient == address(0)) {
            revert AddressZero();
        }
        if (_protocolRewards == address(0)) {
            revert AddressZero();
        }
        if (_weth == address(0)) {
            revert AddressZero();
        }
        if (_v3Factory == address(0)) {
            revert AddressZero();
        }
        if (_swapRouter == address(0)) {
            revert AddressZero();
        }
        if (_airlock == address(0)) {
            revert AddressZero();
        }

        protocolRewardRecipient = _protocolRewardRecipient;
        protocolRewards = _protocolRewards;
        WETH = _weth;
        swapRouter = _swapRouter;
        v3Factory = _v3Factory;
        airlock = _airlock;
    }

    /// @notice Initializes a new coin
    /// @param payoutRecipient_ The address of the coin creator
    /// @param tokenURI_ The metadata URI
    /// @param name_ The coin name
    /// @param symbol_ The coin symbol
    /// @param poolConfig_ The parameters for the v3 pool and liquidity
    /// @param platformReferrer_ The address of the platform referrer
    function initialize(
        address payoutRecipient_,
        address[] memory owners_,
        string memory tokenURI_,
        string memory name_,
        string memory symbol_,
        bytes memory poolConfig_,
        address platformReferrer_
    ) public initializer {
        // Validate the creation parameters
        if (payoutRecipient_ == address(0)) {
            revert AddressZero();
        }

        // Set base contract state
        __ERC20_init(name_, symbol_);
        __ERC20Permit_init(name_);
        __MultiOwnable_init(owners_);
        __ReentrancyGuard_init();

        // Set mutable state
        _setPayoutRecipient(payoutRecipient_);
        _setContractURI(tokenURI_);

        // Store the referrer if set
        platformReferrer = platformReferrer_ == address(0) ? protocolRewardRecipient : platformReferrer_;

        // Mint the total supply
        _mint(address(this), MAX_TOTAL_SUPPLY);

        // Distribute the creator launch reward
        _transfer(address(this), payoutRecipient, CREATOR_LAUNCH_REWARD);

        // Deploy the pool
        _deployLiquidity(poolConfig_);
    }

    /// @notice Executes a buy order
    /// @param recipient The recipient address of the coins
    /// @param orderSize The amount of coins to buy
    /// @param tradeReferrer The address of the trade referrer
    /// @param sqrtPriceLimitX96 The price limit for Uniswap V3 pool swap
    function buy(
        address recipient,
        uint256 orderSize,
        uint256 minAmountOut,
        uint160 sqrtPriceLimitX96,
        address tradeReferrer
    ) public payable nonReentrant returns (uint256, uint256) {
        // Ensure the recipient is not the zero address
        if (recipient == address(0)) {
            revert AddressZero();
        }

        // Calculate the trade reward
        uint256 tradeReward = _calculateReward(orderSize, TOTAL_FEE_BPS);

        // Calculate the remaining size
        uint256 trueOrderSize = orderSize - tradeReward;

        // Handle incoming currency
        _handleIncomingCurrency(orderSize, trueOrderSize);

        // Set up the swap parameters
        ISwapRouter.ExactInputSingleParams memory params = ISwapRouter.ExactInputSingleParams({
            tokenIn: currency,
            tokenOut: address(this),
            fee: MarketConstants.LP_FEE,
            recipient: recipient,
            amountIn: trueOrderSize,
            amountOutMinimum: minAmountOut,
            sqrtPriceLimitX96: sqrtPriceLimitX96
        });

        // Execute the swap
        uint256 amountOut = ISwapRouter(swapRouter).exactInputSingle(params);

        _handleTradeRewards(tradeReward, tradeReferrer);

        _handleMarketRewards();

        emit CoinBuy(msg.sender, recipient, tradeReferrer, amountOut, currency, tradeReward, trueOrderSize);

        return (orderSize, amountOut);
    }

    /// @notice Executes a sell order
    /// @param recipient The recipient of the currency
    /// @param orderSize The amount of coins to sell
    /// @param minAmountOut The minimum amount of currency to receive
    /// @param sqrtPriceLimitX96 The price limit for the swap
    /// @param tradeReferrer The address of the trade referrer
    function sell(
        address recipient,
        uint256 orderSize,
        uint256 minAmountOut,
        uint160 sqrtPriceLimitX96,
        address tradeReferrer
    ) public nonReentrant returns (uint256, uint256) {
        // Ensure the recipient is not the zero address
        if (recipient == address(0)) {
            revert AddressZero();
        }

        // Record the coin balance of this contract before the swap
        uint256 beforeCoinBalance = balanceOf(address(this));

        // Transfer the coins from the seller to this contract
        transfer(address(this), orderSize);

        // Approve the Uniswap V3 swap router
        this.approve(swapRouter, orderSize);

        // Set the swap parameters
        ISwapRouter.ExactInputSingleParams memory params = ISwapRouter.ExactInputSingleParams({
            tokenIn: address(this),
            tokenOut: currency,
            fee: MarketConstants.LP_FEE,
            recipient: address(this),
            amountIn: orderSize,
            amountOutMinimum: minAmountOut,
            sqrtPriceLimitX96: sqrtPriceLimitX96
        });

        // Execute the swap
        uint256 amountOut = ISwapRouter(swapRouter).exactInputSingle(params);

        // Record the coin balance of this contract after the swap
        uint256 afterCoinBalance = balanceOf(address(this));

        // If the swap was partially executed:
        if (afterCoinBalance > beforeCoinBalance) {
            // Calculate the refund
            uint256 coinRefund = afterCoinBalance - beforeCoinBalance;

            // Update the order size
            orderSize -= coinRefund;

            // Transfer the refund back to the seller
            _transfer(address(this), recipient, coinRefund);
        }

        // If currency is WETH, convert to ETH
        if (currency == WETH) {
            IWETH(WETH).withdraw(amountOut);
        }

        // Calculate the trade reward
        uint256 tradeReward = _calculateReward(amountOut, TOTAL_FEE_BPS);

        // Calculate the payout after the fee
        uint256 payoutSize = amountOut - tradeReward;

        _handlePayout(payoutSize, recipient);

        _handleTradeRewards(tradeReward, tradeReferrer);

        _handleMarketRewards();

        emit CoinSell(msg.sender, recipient, tradeReferrer, orderSize, currency, tradeReward, payoutSize);

        return (orderSize, payoutSize);
    }

    /// @notice Enables a user to burn their tokens
    /// @param amount The amount of tokens to burn
    function burn(uint256 amount) external {
        // This burn function sets the from as msg.sender, so having an unauthed call is safe.
        _burn(msg.sender, amount);
    }

    /// @notice Force claim any accrued secondary rewards from the market's liquidity position.
    /// @dev This function is a fallback, secondary rewards will be claimed automatically on each buy and sell.
    /// @param pushEthRewards Whether to push the ETH directly to the recipients.
    function claimSecondaryRewards(bool pushEthRewards) external nonReentrant {
        MarketRewards memory rewards = _handleMarketRewards();

        if (pushEthRewards && rewards.totalAmountCurrency > 0 && currency == WETH) {
            IProtocolRewards(protocolRewards).withdrawFor(payoutRecipient, rewards.creatorPayoutAmountCurrency);
            IProtocolRewards(protocolRewards).withdrawFor(platformReferrer, rewards.platformReferrerAmountCurrency);
            IProtocolRewards(protocolRewards).withdrawFor(protocolRewardRecipient, rewards.protocolAmountCurrency);
        }
    }

    /// @notice Set the creator's payout address
    /// @param newPayoutRecipient The new recipient address
    function setPayoutRecipient(address newPayoutRecipient) external onlyOwner {
        _setPayoutRecipient(newPayoutRecipient);
    }

    /// @notice Set the contract URI
    /// @param newURI The new URI
    function setContractURI(string memory newURI) external onlyOwner {
        _setContractURI(newURI);
    }

    /// @notice The contract metadata
    function contractURI() external view returns (string memory) {
        return tokenURI;
    }

    /// @notice ERC165 interface support
    /// @param interfaceId The interface ID to check
    function supportsInterface(bytes4 interfaceId) public pure virtual returns (bool) {
        return
            interfaceId == type(ICoin).interfaceId ||
            interfaceId == type(ICoinComments).interfaceId ||
            interfaceId == type(IERC7572).interfaceId ||
            interfaceId == type(IERC165).interfaceId;
    }

    /// @notice Receives ETH converted from WETH
    receive() external payable {
        require(msg.sender == WETH, OnlyWeth());
    }

    /// @dev Called by the pool after minting liquidity to transfer the associated coins
    function uniswapV3MintCallback(uint256 amount0Owed, uint256 amount1Owed, bytes calldata) external {
        if (msg.sender != poolAddress) revert OnlyPool();

        IERC20(address(this)).safeTransfer(poolAddress, amount0Owed == 0 ? amount1Owed : amount0Owed);
    }

    /// @dev Overrides ERC20's _update function to emit a superset `CoinTransfer` event
    function _update(address from, address to, uint256 value) internal virtual override {
        super._update(from, to, value);

        emit CoinTransfer(from, to, value, balanceOf(from), balanceOf(to));
    }

    /// @dev Used to set the payout recipient on coin creation and updates
    /// @param newPayoutRecipient The new recipient address
    function _setPayoutRecipient(address newPayoutRecipient) internal {
        if (newPayoutRecipient == address(0)) {
            revert AddressZero();
        }

        emit CoinPayoutRecipientUpdated(msg.sender, payoutRecipient, newPayoutRecipient);

        payoutRecipient = newPayoutRecipient;
    }

    /// @dev Used to set the contract URI on coin creation and updates
    /// @param newURI The new URI
    function _setContractURI(string memory newURI) internal {
        emit ContractMetadataUpdated(msg.sender, newURI, name());
        emit ContractURIUpdated();

        tokenURI = newURI;
    }

    /// @dev Deploys the Uniswap V3 pool and mints initial liquidity based on the pool configuration
    function _deployLiquidity(bytes memory poolConfig_) internal {
        (uint8 version, address currency_) = abi.decode(poolConfig_, (uint8, address));

        // Store the currency, defaulting to WETH if address(0)
        currency = currency_ == address(0) ? WETH : currency_;

        // Sort the token addresses
        address token0 = address(this) < currency ? address(this) : currency;
        address token1 = address(this) < currency ? currency : address(this);
        bool isCoinToken0 = token0 == address(this);

        (uint160 sqrtPriceX96, PoolConfiguration memory _poolConfig) = CoinSetup.setupPoolWithVersion(version, poolConfig_, isCoinToken0, WETH);

        poolConfiguration = _poolConfig;

        poolAddress = _createPool(token0, token1, sqrtPriceX96);

        LpPosition[] memory positions = CoinSetup.calculatePositions(isCoinToken0, poolConfiguration);

        _mintPositions(positions);
    }

    /// @dev Creates the Uniswap V3 pool for the coin/currency pair
    function _createPool(address token0, address token1, uint160 sqrtPriceX96) internal returns (address pool) {
        pool = IUniswapV3Factory(v3Factory).createPool(token0, token1, MarketConstants.LP_FEE);

        // This pool should be new, if it has already been initialized
        // then we will fail the creation step prompting the user to try again.
        IUniswapV3Pool(pool).initialize(sqrtPriceX96);
    }

    /// @dev Mints the calculated liquidity positions into the Uniswap V3 pool
    function _mintPositions(LpPosition[] memory lbpPositions) internal {
        for (uint256 i; i < lbpPositions.length; i++) {
            IUniswapV3Pool(poolAddress).mint(address(this), lbpPositions[i].tickLower, lbpPositions[i].tickUpper, lbpPositions[i].liquidity, "");
        }
    }

    /// @dev Handles incoming currency transfers for buy orders; if WETH is the currency the caller has the option to send native-ETH
    /// @param orderSize The total size of the order in the currency
    /// @param trueOrderSize The actual amount being used for the swap after fees
    function _handleIncomingCurrency(uint256 orderSize, uint256 trueOrderSize) internal {
        if (currency == WETH && msg.value > 0) {
            if (msg.value != orderSize) {
                revert EthAmountMismatch();
            }

            if (msg.value < MIN_ORDER_SIZE) {
                revert EthAmountTooSmall();
            }

            IWETH(WETH).deposit{value: trueOrderSize}();
            IWETH(WETH).approve(swapRouter, trueOrderSize);
        } else {
            // Ensure ETH is not sent with a non-ETH pair
            if (msg.value != 0) {
                revert EthTransferInvalid();
            }

            uint256 beforeBalance = IERC20(currency).balanceOf(address(this));
            IERC20(currency).safeTransferFrom(msg.sender, address(this), orderSize);
            uint256 afterBalance = IERC20(currency).balanceOf(address(this));

            if ((afterBalance - beforeBalance) != orderSize) {
                revert ERC20TransferAmountMismatch();
            }

            IERC20(currency).approve(swapRouter, trueOrderSize);
        }
    }

    /// @dev Handles sending ETH and ERC20 payouts and refunds to recipients
    /// @param orderPayout The amount of currency to pay out
    /// @param recipient The address to receive the payout
    function _handlePayout(uint256 orderPayout, address recipient) internal {
        if (currency == WETH) {
            Address.sendValue(payable(recipient), orderPayout);
        } else {
            IERC20(currency).safeTransfer(recipient, orderPayout);
        }
    }

    /// @dev Handles calculating and depositing fees to an escrow protocol rewards contract
    function _handleTradeRewards(uint256 totalValue, address _tradeReferrer) internal {
        if (_tradeReferrer == address(0)) {
            _tradeReferrer = protocolRewardRecipient;
        }

        uint256 tokenCreatorFee = _calculateReward(totalValue, TOKEN_CREATOR_FEE_BPS);
        uint256 platformReferrerFee = _calculateReward(totalValue, PLATFORM_REFERRER_FEE_BPS);
        uint256 tradeReferrerFee = _calculateReward(totalValue, TRADE_REFERRER_FEE_BPS);
        uint256 protocolFee = totalValue - tokenCreatorFee - platformReferrerFee - tradeReferrerFee;

        if (currency == WETH) {
            address[] memory recipients = new address[](4);
            uint256[] memory amounts = new uint256[](4);
            bytes4[] memory reasons = new bytes4[](4);

            recipients[0] = payoutRecipient;
            amounts[0] = tokenCreatorFee;
            reasons[0] = bytes4(keccak256("COIN_CREATOR_REWARD"));

            recipients[1] = platformReferrer;
            amounts[1] = platformReferrerFee;
            reasons[1] = bytes4(keccak256("COIN_PLATFORM_REFERRER_REWARD"));

            recipients[2] = _tradeReferrer;
            amounts[2] = tradeReferrerFee;
            reasons[2] = bytes4(keccak256("COIN_TRADE_REFERRER_REWARD"));

            recipients[3] = protocolRewardRecipient;
            amounts[3] = protocolFee;
            reasons[3] = bytes4(keccak256("COIN_PROTOCOL_REWARD"));

            IProtocolRewards(protocolRewards).depositBatch{value: totalValue}(recipients, amounts, reasons, "");
        }

        if (currency != WETH) {
            IERC20(currency).safeTransfer(payoutRecipient, tokenCreatorFee);
            IERC20(currency).safeTransfer(platformReferrer, platformReferrerFee);
            IERC20(currency).safeTransfer(_tradeReferrer, tradeReferrerFee);
            IERC20(currency).safeTransfer(protocolRewardRecipient, protocolFee);
        }

        emit CoinTradeRewards(
            payoutRecipient,
            platformReferrer,
            _tradeReferrer,
            protocolRewardRecipient,
            tokenCreatorFee,
            platformReferrerFee,
            tradeReferrerFee,
            protocolFee,
            currency
        );
    }

    /// @dev Collects and distributes accrued fees from all LP positions
    function _handleMarketRewards() internal returns (MarketRewards memory) {
        uint256 totalAmountToken0;
        uint256 totalAmountToken1;
        uint256 amount0;
        uint256 amount1;

        bool isCoinToken0 = address(this) < currency;
        LpPosition[] memory positions = CoinSetup.calculatePositions(isCoinToken0, poolConfiguration);

        for (uint256 i; i < positions.length; i++) {
            // Must burn to update the collect mapping on the pool
            IUniswapV3Pool(poolAddress).burn(positions[i].tickLower, positions[i].tickUpper, 0);

            (amount0, amount1) = IUniswapV3Pool(poolAddress).collect(
                address(this),
                positions[i].tickLower,
                positions[i].tickUpper,
                type(uint128).max,
                type(uint128).max
            );

            totalAmountToken0 += amount0;
            totalAmountToken1 += amount1;
        }

        address token0 = currency < address(this) ? currency : address(this);
        address token1 = currency < address(this) ? address(this) : currency;

        MarketRewards memory rewards;

        rewards = _transferMarketRewards(token0, totalAmountToken0, rewards);
        rewards = _transferMarketRewards(token1, totalAmountToken1, rewards);

        emit CoinMarketRewards(payoutRecipient, platformReferrer, protocolRewardRecipient, currency, rewards);

        return rewards;
    }

    function _transferMarketRewards(address token, uint256 totalAmount, MarketRewards memory rewards) internal returns (MarketRewards memory) {
        if (totalAmount > 0) {
            address dopplerRecipient = IAirlock(airlock).owner();
            uint256 dopplerPayout = _calculateReward(totalAmount, DOPPLER_MARKET_REWARD_BPS);
            uint256 creatorPayout = _calculateReward(totalAmount, CREATOR_MARKET_REWARD_BPS);
            uint256 platformReferrerPayout = _calculateReward(totalAmount, PLATFORM_REFERRER_MARKET_REWARD_BPS);
            uint256 protocolPayout = totalAmount - creatorPayout - platformReferrerPayout - dopplerPayout;

            if (token == WETH) {
                IWETH(WETH).withdraw(totalAmount);

                rewards.totalAmountCurrency = totalAmount;
                rewards.creatorPayoutAmountCurrency = creatorPayout;
                rewards.platformReferrerAmountCurrency = platformReferrerPayout;
                rewards.protocolAmountCurrency = protocolPayout;

                address[] memory recipients = new address[](4);
                recipients[0] = payoutRecipient;
                recipients[1] = platformReferrer;
                recipients[2] = protocolRewardRecipient;
                recipients[3] = dopplerRecipient;

                uint256[] memory amounts = new uint256[](4);
                amounts[0] = rewards.creatorPayoutAmountCurrency;
                amounts[1] = rewards.platformReferrerAmountCurrency;
                amounts[2] = rewards.protocolAmountCurrency;
                amounts[3] = dopplerPayout;

                bytes4[] memory reasons = new bytes4[](4);
                reasons[0] = bytes4(keccak256("COIN_CREATOR_MARKET_REWARD"));
                reasons[1] = bytes4(keccak256("COIN_PLATFORM_REFERRER_MARKET_REWARD"));
                reasons[2] = bytes4(keccak256("COIN_PROTOCOL_MARKET_REWARD"));
                reasons[3] = bytes4(keccak256("COIN_DOPPLER_MARKET_REWARD"));

                IProtocolRewards(protocolRewards).depositBatch{value: totalAmount}(recipients, amounts, reasons, "");
                IProtocolRewards(protocolRewards).withdrawFor(dopplerRecipient, dopplerPayout);
            } else if (token == address(this)) {
                rewards.totalAmountCoin = totalAmount;
                rewards.creatorPayoutAmountCoin = creatorPayout;
                rewards.platformReferrerAmountCoin = platformReferrerPayout;
                rewards.protocolAmountCoin = protocolPayout;

                _transfer(address(this), payoutRecipient, rewards.creatorPayoutAmountCoin);
                _transfer(address(this), platformReferrer, rewards.platformReferrerAmountCoin);
                _transfer(address(this), protocolRewardRecipient, rewards.protocolAmountCoin);
                _transfer(address(this), dopplerRecipient, dopplerPayout);
            } else {
                rewards.totalAmountCurrency = totalAmount;
                rewards.creatorPayoutAmountCurrency = creatorPayout;
                rewards.platformReferrerAmountCurrency = platformReferrerPayout;
                rewards.protocolAmountCurrency = protocolPayout;

                IERC20(currency).safeTransfer(payoutRecipient, creatorPayout);
                IERC20(currency).safeTransfer(platformReferrer, platformReferrerPayout);
                IERC20(currency).safeTransfer(protocolRewardRecipient, protocolPayout);
                IERC20(currency).safeTransfer(dopplerRecipient, dopplerPayout);
            }
        }

        return rewards;
    }

    /// @dev Utility for computing amounts in basis points.
    function _calculateReward(uint256 amount, uint256 bps) internal pure returns (uint256) {
        return (amount * bps) / 10_000;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {IERC7572} from "./IERC7572.sol";
import {IDopplerErrors} from "./IDopplerErrors.sol";

/// @notice The configuration of the pool
/// @dev This is used to configure the pool's liquidity positions
struct PoolConfiguration {
    uint8 version;
    int24 tickLower;
    int24 tickUpper;
    uint16 numPositions;
    uint256 maxDiscoverySupplyShare;
}

interface ICoin is IERC165, IERC7572, IDopplerErrors {
    /// @notice Thrown when an operation is attempted with a zero address
    error AddressZero();

    /// @notice Thrown when an invalid market type is specified
    error InvalidMarketType();

    /// @notice Thrown when there are insufficient funds for an operation
    error InsufficientFunds();

    /// @notice Thrown when there is insufficient liquidity for a transaction
    error InsufficientLiquidity();

    /// @notice Thrown when the slippage bounds are exceeded during a transaction
    error SlippageBoundsExceeded();

    /// @notice Thrown when the initial order size is too large
    error InitialOrderSizeTooLarge();

    /// @notice Thrown when the msg.value amount does not match the amount of currency sent
    error EthAmountMismatch();

    /// @notice Thrown when the ETH amount is too small for a transaction
    error EthAmountTooSmall();

    /// @notice Thrown when the expected amount of ERC20s transferred does not match the amount received
    error ERC20TransferAmountMismatch();

    /// @notice Thrown when ETH is sent with a buy or sell but the currency is not WETH
    error EthTransferInvalid();

    /// @notice Thrown when an ETH transfer fails
    error EthTransferFailed();

    /// @notice Thrown when an operation is attempted by an entity other than the pool
    error OnlyPool();

    /// @notice Thrown when an operation is attempted by an entity other than WETH
    error OnlyWeth();

    /// @notice Thrown when a market is not yet graduated
    error MarketNotGraduated();

    /// @notice Thrown when a market is already graduated
    error MarketAlreadyGraduated();

    /// @notice Thrown when the lower tick is not less than the maximum tick or not a multiple of 200
    error InvalidCurrencyLowerTick();

    /// @notice Thrown when the lower tick is not set to the default value
    error InvalidWethLowerTick();

    /// @notice Thrown when a legacy pool does not have one discovery position
    error LegacyPoolMustHaveOneDiscoveryPosition();

    /// @notice Thrown when a Doppler pool does not have more than 2 discovery positions
    error DopplerPoolMustHaveMoreThan2DiscoveryPositions();

    /// @notice The rewards accrued from the market's liquidity position
    struct MarketRewards {
        uint256 totalAmountCurrency;
        uint256 totalAmountCoin;
        uint256 creatorPayoutAmountCurrency;
        uint256 creatorPayoutAmountCoin;
        uint256 platformReferrerAmountCurrency;
        uint256 platformReferrerAmountCoin;
        uint256 protocolAmountCurrency;
        uint256 protocolAmountCoin;
    }

    /// @notice Emitted when market rewards are distributed
    /// @param payoutRecipient The address of the creator rewards payout recipient
    /// @param platformReferrer The address of the platform referrer
    /// @param protocolRewardRecipient The address of the protocol reward recipient
    /// @param currency The address of the currency
    /// @param marketRewards The rewards accrued from the market's liquidity position
    event CoinMarketRewards(
        address indexed payoutRecipient,
        address indexed platformReferrer,
        address protocolRewardRecipient,
        address currency,
        MarketRewards marketRewards
    );

    /// @notice Emitted when coins are bought
    /// @param buyer The address of the buyer
    /// @param recipient The address of the recipient
    /// @param tradeReferrer The address of the trade referrer
    /// @param coinsPurchased The number of coins purchased
    /// @param currency The address of the currency
    /// @param amountFee The fee for the purchase
    /// @param amountSold The amount of the currency sold
    event CoinBuy(
        address indexed buyer,
        address indexed recipient,
        address indexed tradeReferrer,
        uint256 coinsPurchased,
        address currency,
        uint256 amountFee,
        uint256 amountSold
    );

    /// @notice Emitted when coins are sold
    /// @param seller The address of the seller
    /// @param recipient The address of the recipient
    /// @param tradeReferrer The address of the trade referrer
    /// @param coinsSold The number of coins sold
    /// @param currency The address of the currency
    /// @param amountFee The fee for the sale
    /// @param amountPurchased The amount of the currency purchased
    event CoinSell(
        address indexed seller,
        address indexed recipient,
        address indexed tradeReferrer,
        uint256 coinsSold,
        address currency,
        uint256 amountFee,
        uint256 amountPurchased
    );

    /// @notice Emitted when a coin is transferred
    /// @param sender The address of the sender
    /// @param recipient The address of the recipient
    /// @param amount The amount of coins
    /// @param senderBalance The balance of the sender after the transfer
    /// @param recipientBalance The balance of the recipient after the transfer
    event CoinTransfer(address indexed sender, address indexed recipient, uint256 amount, uint256 senderBalance, uint256 recipientBalance);

    /// @notice Emitted when trade rewards are distributed
    /// @param payoutRecipient The address of the creator rewards payout recipient
    /// @param platformReferrer The address of the platform referrer
    /// @param tradeReferrer The address of the trade referrer
    /// @param protocolRewardRecipient The address of the protocol reward recipient
    /// @param creatorReward The reward for the creator
    /// @param platformReferrerReward The reward for the platform referrer
    /// @param traderReferrerReward The reward for the trade referrer
    /// @param protocolReward The reward for the protocol
    /// @param currency The address of the currency
    event CoinTradeRewards(
        address indexed payoutRecipient,
        address indexed platformReferrer,
        address indexed tradeReferrer,
        address protocolRewardRecipient,
        uint256 creatorReward,
        uint256 platformReferrerReward,
        uint256 traderReferrerReward,
        uint256 protocolReward,
        address currency
    );

    /// @notice Emitted when the creator's payout address is updated
    /// @param caller The msg.sender address
    /// @param prevRecipient The previous payout recipient address
    /// @param newRecipient The new payout recipient address
    event CoinPayoutRecipientUpdated(address indexed caller, address indexed prevRecipient, address indexed newRecipient);

    /// @notice Emitted when the contract URI is updated
    /// @param caller The msg.sender address
    /// @param newURI The new contract URI
    /// @param name The coin name
    event ContractMetadataUpdated(address indexed caller, string newURI, string name);

    /// @notice Executes a buy order
    /// @param recipient The recipient address of the coins
    /// @param orderSize The amount of coins to buy
    /// @param tradeReferrer The address of the trade referrer
    /// @param sqrtPriceLimitX96 The price limit for Uniswap V3 pool swap
    function buy(
        address recipient,
        uint256 orderSize,
        uint256 minAmountOut,
        uint160 sqrtPriceLimitX96,
        address tradeReferrer
    ) external payable returns (uint256, uint256);

    /// @notice Executes a sell order
    /// @param recipient The recipient of the currency
    /// @param orderSize The amount of coins to sell
    /// @param minAmountOut The minimum amount of currency to receive
    /// @param sqrtPriceLimitX96 The price limit for the swap
    /// @param tradeReferrer The address of the trade referrer
    function sell(
        address recipient,
        uint256 orderSize,
        uint256 minAmountOut,
        uint160 sqrtPriceLimitX96,
        address tradeReferrer
    ) external returns (uint256, uint256);

    /// @notice Enables a user to burn their tokens
    /// @param amount The amount of tokens to burn
    function burn(uint256 amount) external;

    /// @notice Returns the URI of the token
    /// @return The token URI
    function tokenURI() external view returns (string memory);

    /// @notice Returns the address of the platform referrer
    /// @return The platform referrer's address
    function platformReferrer() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface ICoinComments {
    function isOwner(address) external view returns (bool);
    function payoutRecipient() external view returns (address);
    function balanceOf(address) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice For compatibility with ERC7572 - the interface for contract-level metadata
/// @dev https://eips.ethereum.org/EIPS/eip-7572
interface IERC7572 {
    /// @notice Emitted when the contract URI is updated
    event ContractURIUpdated();

    /// @notice Returns the contract-level metadata
    function contractURI() external view returns (string memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title The interface for the Uniswap V3 Factory
/// @notice The Uniswap V3 Factory facilitates creation of Uniswap V3 pools and control over the protocol fees
interface IUniswapV3Factory {
    /// @notice Emitted when the owner of the factory is changed
    /// @param oldOwner The owner before the owner was changed
    /// @param newOwner The owner after the owner was changed
    event OwnerChanged(address indexed oldOwner, address indexed newOwner);

    /// @notice Emitted when a pool is created
    /// @param token0 The first token of the pool by address sort order
    /// @param token1 The second token of the pool by address sort order
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks
    /// @param pool The address of the created pool
    event PoolCreated(address indexed token0, address indexed token1, uint24 indexed fee, int24 tickSpacing, address pool);

    /// @notice Emitted when a new fee amount is enabled for pool creation via the factory
    /// @param fee The enabled fee, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks for pools created with the given fee
    event FeeAmountEnabled(uint24 indexed fee, int24 indexed tickSpacing);

    /// @notice Returns the current owner of the factory
    /// @dev Can be changed by the current owner via setOwner
    /// @return The address of the factory owner
    function owner() external view returns (address);

    /// @notice Returns the tick spacing for a given fee amount, if enabled, or 0 if not enabled
    /// @dev A fee amount can never be removed, so this value should be hard coded or cached in the calling context
    /// @param fee The enabled fee, denominated in hundredths of a bip. Returns 0 in case of unenabled fee
    /// @return The tick spacing
    function feeAmountTickSpacing(uint24 fee) external view returns (int24);

    /// @notice Returns the pool address for a given pair of tokens and a fee, or address 0 if it does not exist
    /// @dev tokenA and tokenB may be passed in either token0/token1 or token1/token0 order
    /// @param tokenA The contract address of either token0 or token1
    /// @param tokenB The contract address of the other token
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @return pool The pool address
    function getPool(address tokenA, address tokenB, uint24 fee) external view returns (address pool);

    /// @notice Creates a pool for the given two tokens and fee
    /// @param tokenA One of the two tokens in the desired pool
    /// @param tokenB The other of the two tokens in the desired pool
    /// @param fee The desired fee for the pool
    /// @dev tokenA and tokenB may be passed in either order: token0/token1 or token1/token0. tickSpacing is retrieved
    /// from the fee. The call will revert if the pool already exists, the fee is invalid, or the token arguments
    /// are invalid.
    /// @return pool The address of the newly created pool
    function createPool(address tokenA, address tokenB, uint24 fee) external returns (address pool);

    /// @notice Updates the owner of the factory
    /// @dev Must be called by the current owner
    /// @param _owner The new owner of the factory
    function setOwner(address _owner) external;

    /// @notice Enables a fee amount with the given tickSpacing
    /// @dev Fee amounts may never be removed once enabled
    /// @param fee The fee amount to enable, denominated in hundredths of a bip (i.e. 1e-6)
    /// @param tickSpacing The spacing between ticks to be enforced for all pools created with the given fee amount
    function enableFeeAmount(uint24 fee, int24 tickSpacing) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

interface IUniswapV3Pool {
    /// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal0X128() external view returns (uint256);

    /// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal1X128() external view returns (uint256);

    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes memory data
    ) external returns (int256 amount0, int256 amount1);

    function token0() external returns (address);
    function token1() external returns (address);

    struct Slot0 {
        // the current price
        uint160 sqrtPriceX96;
        // the current tick
        int24 tick;
        // the most-recently updated index of the observations array
        uint16 observationIndex;
        // the current maximum number of observations that are being stored
        uint16 observationCardinality;
        // the next maximum number of observations to store, triggered in observations.write
        uint16 observationCardinalityNext;
        // the current protocol fee as a percentage of the swap fee taken on withdrawal
        // represented as an integer denominator (1/x)%
        uint8 feeProtocol;
        // whether the pool is locked
        bool unlocked;
    }

    function slot0() external view returns (Slot0 memory slot0);

    /// @notice Sets the initial price for the pool
    /// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
    /// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
    function initialize(uint160 sqrtPriceX96) external;

    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(address recipient, int24 tickLower, int24 tickUpper, uint128 amount, bytes calldata data) external returns (uint256 amount0, uint256 amount1);

    /// @notice Collects tokens owed to a position
    /// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
    /// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
    /// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
    /// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
    /// @param recipient The address which should receive the fees collected
    /// @param tickLower The lower tick of the position for which to collect fees
    /// @param tickUpper The upper tick of the position for which to collect fees
    /// @param amount0Requested How much token0 should be withdrawn from the fees owed
    /// @param amount1Requested How much token1 should be withdrawn from the fees owed
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);

    /// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
    /// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
    /// @dev Fees must be collected separately via a call to #collect
    /// @param tickLower The lower tick of the position for which to burn liquidity
    /// @param tickUpper The upper tick of the position for which to burn liquidity
    /// @param amount How much liquidity to burn
    /// @return amount0 The amount of token0 sent to the recipient
    /// @return amount1 The amount of token1 sent to the recipient
    function burn(int24 tickLower, int24 tickUpper, uint128 amount) external returns (uint256 amount0, uint256 amount1);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {IUniswapV3SwapCallback} from "./IUniswapV3SwapCallback.sol";

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

interface IAirlock {
    function owner() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IProtocolRewards {
    function balanceOf(address account) external view returns (uint256);

    function deposit(address to, bytes4 why, string calldata comment) external payable;

    function depositBatch(address[] calldata recipients, uint256[] calldata amounts, bytes4[] calldata reasons, string calldata comment) external payable;

    function withdrawFor(address to, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IWETH {
    function deposit() external payable;

    function withdraw(uint256 wad) external;

    function approve(address guy, uint256 wad) external returns (bool);

    function transfer(address dst, uint256 wad) external returns (bool);

    function transferFrom(address src, address dst, uint256 wad) external returns (bool);

    function balanceOf(address guy) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import {EIP712Upgradeable} from "../../../utils/cryptography/EIP712Upgradeable.sol";
import {NoncesUpgradeable} from "../../../utils/NoncesUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC-20 token name.
     */
    function __ERC20Permit_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }

    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    /// @custom:storage-location erc7201:openzeppelin.storage.ReentrancyGuard
    struct ReentrancyGuardStorage {
        uint256 _status;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ReentrancyGuardStorageLocation = 0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;

    function _getReentrancyGuardStorage() private pure returns (ReentrancyGuardStorage storage $) {
        assembly {
            $.slot := ReentrancyGuardStorageLocation
        }
    }

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if ($._status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        $._status = ENTERED;
    }

    function _nonReentrantAfter() private {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        $._status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage();
        return $._status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// This file is automatically generated by code; do not manually update
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {IVersionedContract} from "@zoralabs/shared-contracts/interfaces/IVersionedContract.sol";

/// @title ContractVersionBase
/// @notice Base contract for versioning contracts
contract ContractVersionBase is IVersionedContract {
    /// @notice The version of the contract
    function contractVersion() external pure override returns (string memory) {
        return "0.7.0";
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

abstract contract CoinConstants {
    /// @notice The maximum total supply
    /// @dev Set to 1 billion coins with 18 decimals
    uint256 public constant MAX_TOTAL_SUPPLY = 1_000_000_000e18;

    /// @notice The number of coins allocated to the liquidity pool
    /// @dev 990 million coins
    uint256 internal constant POOL_LAUNCH_SUPPLY = 990_000_000e18;

    /// @notice The number of coins rewarded to the creator
    /// @dev 10 million coins
    uint256 internal constant CREATOR_LAUNCH_REWARD = 10_000_000e18;

    /// @notice The minimum order size allowed for trades
    /// @dev Set to 0.0000001 ETH to prevent dust transactions
    uint256 public constant MIN_ORDER_SIZE = 0.0000001 ether;

    /// @notice The total fee percentage in basis points
    /// @dev 100 basis points = 1%
    uint256 public constant TOTAL_FEE_BPS = 100;

    /// @notice The percentage of the total fee allocated to creators
    /// @dev 5000 basis points = 50% of TOTAL_FEE_BPS
    uint256 public constant TOKEN_CREATOR_FEE_BPS = 5000;

    /// @notice The percentage of the total fee allocated to the protocol
    /// @dev 2000 basis points = 20% of TOTAL_FEE_BPS
    uint256 public constant PROTOCOL_FEE_BPS = 2000;

    /// @notice The percentage of the total fee allocated to platform referrers
    /// @dev 1500 basis points = 15% of TOTAL_FEE_BPS
    uint256 public constant PLATFORM_REFERRER_FEE_BPS = 1500;

    /// @notice The percentage of the total fee allocated to trade referrers
    /// @dev 1500 basis points = 15% of TOTAL_FEE_BPS
    uint256 public constant TRADE_REFERRER_FEE_BPS = 1500;

    /// @notice The percentage of the LP fee allocated to creators
    /// @dev 5000 basis points = 50% of the 1% LP FEE
    uint256 internal constant CREATOR_MARKET_REWARD_BPS = 5000;

    /// @notice The percentage of the LP fee allocated to platform referrers
    /// @dev 2500 basis points = 25% of the 1% LP FEE
    uint256 internal constant PLATFORM_REFERRER_MARKET_REWARD_BPS = 2500;

    /// @notice The percentage of the LP fee allocated to the Doppler protocol
    /// @dev 500 basis points = 5% of the 1% LP FEE
    uint256 internal constant DOPPLER_MARKET_REWARD_BPS = 500;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {Initializable} from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";

/// @title MultiOwnable
/// @notice Allows multiple addresses to have owner privileges
contract MultiOwnable is Initializable {
    using EnumerableSet for EnumerableSet.AddressSet;

    event OwnerUpdated(address indexed caller, address indexed prevOwner, address indexed newOwner);

    error AlreadyOwner();
    error NotOwner();
    error OneOwnerRequired();
    error OwnerCannotBeAddressZero();
    error OnlyOwner();
    error UseRevokeOwnershipToRemoveSelf();

    EnumerableSet.AddressSet internal _owners;

    /// @notice Restricts function access to current owners
    modifier onlyOwner() {
        if (!isOwner(msg.sender)) {
            revert OnlyOwner();
        }
        _;
    }

    /// @dev Initializes the contract with a set of owners
    /// @param initialOwners An list of initial owner addresses
    function __MultiOwnable_init(address[] memory initialOwners) internal onlyInitializing {
        uint256 numOwners = initialOwners.length;

        if (numOwners == 0) {
            revert OneOwnerRequired();
        }

        for (uint256 i; i < numOwners; ++i) {
            if (initialOwners[i] == address(0)) {
                revert OwnerCannotBeAddressZero();
            }

            if (isOwner(initialOwners[i])) {
                revert AlreadyOwner();
            }

            _owners.add(initialOwners[i]);

            emit OwnerUpdated(msg.sender, address(0), initialOwners[i]);
        }
    }

    /// @notice Checks if an address is an owner
    /// @param account The address to check
    function isOwner(address account) public view returns (bool) {
        return _owners.contains(account);
    }

    /// @notice The current owner addresses
    function owners() public view returns (address[] memory) {
        return _owners.values();
    }

    /// @notice Adds multiple owners
    /// @param accounts The addresses to add as owners
    function addOwners(address[] memory accounts) public onlyOwner {
        for (uint256 i; i < accounts.length; ++i) {
            addOwner(accounts[i]);
        }
    }

    /// @notice Adds a new owner
    /// @dev Only callable by existing owners
    /// @param account The address to add as an owner
    function addOwner(address account) public onlyOwner {
        if (account == address(0)) {
            revert OwnerCannotBeAddressZero();
        }

        if (isOwner(account)) {
            revert AlreadyOwner();
        }

        _owners.add(account);

        emit OwnerUpdated(msg.sender, address(0), account);
    }

    /// @notice Removes multiple owners
    /// @param accounts The addresses to remove as owners
    function removeOwners(address[] memory accounts) public onlyOwner {
        for (uint256 i; i < accounts.length; ++i) {
            removeOwner(accounts[i]);
        }
    }

    /// @notice Removes an existing owner
    /// @dev Only callable by existing owners
    /// @param account The address to remove as an owner
    function removeOwner(address account) public onlyOwner {
        if (account == address(0)) {
            revert OwnerCannotBeAddressZero();
        }

        if (account == msg.sender) {
            revert UseRevokeOwnershipToRemoveSelf();
        }

        if (!isOwner(account)) {
            revert NotOwner();
        }

        _owners.remove(account);

        emit OwnerUpdated(msg.sender, account, address(0));
    }

    /// @notice Revokes ownership for the caller
    function revokeOwnership() public onlyOwner {
        _owners.remove(msg.sender);

        emit OwnerUpdated(msg.sender, msg.sender, address(0));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/FullMath.sol
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = a * b
            // Compute the product mod 2**256 and mod 2**256 - 1
            // then use the Chinese Remainder Theorem to reconstruct
            // the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2**256 + prod0
            uint256 prod0 = a * b; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly ("memory-safe") {
                let mm := mulmod(a, b, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Make sure the result is less than 2**256.
            // Also prevents denominator == 0
            require(denominator > prod1);

            // Handle non-overflow cases, 256 by 256 division
            if (prod1 == 0) {
                assembly ("memory-safe") {
                    result := div(prod0, denominator)
                }
                return result;
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0]
            // Compute remainder using mulmod
            uint256 remainder;
            assembly ("memory-safe") {
                remainder := mulmod(a, b, denominator)
            }
            // Subtract 256 bit number from 512 bit number
            assembly ("memory-safe") {
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator
            // Compute largest power of two divisor of denominator.
            // Always >= 1.
            uint256 twos = (0 - denominator) & denominator;
            // Divide denominator by power of two
            assembly ("memory-safe") {
                denominator := div(denominator, twos)
            }

            // Divide [prod1 prod0] by the factors of two
            assembly ("memory-safe") {
                prod0 := div(prod0, twos)
            }
            // Shift in bits from prod1 into prod0. For this we need
            // to flip `twos` such that it is 2**256 / twos.
            // If twos is zero, then it becomes one
            assembly ("memory-safe") {
                twos := add(div(sub(0, twos), twos), 1)
            }
            prod0 |= prod1 * twos;

            // Invert denominator mod 2**256
            // Now that denominator is an odd number, it has an inverse
            // modulo 2**256 such that denominator * inv = 1 mod 2**256.
            // Compute the inverse by starting with a seed that is correct
            // correct for four bits. That is, denominator * inv = 1 mod 2**4
            uint256 inv = (3 * denominator) ^ 2;
            // Now use Newton-Raphson iteration to improve the precision.
            // Thanks to Hensel's lifting lemma, this also works in modular
            // arithmetic, doubling the correct bits in each step.
            inv *= 2 - denominator * inv; // inverse mod 2**8
            inv *= 2 - denominator * inv; // inverse mod 2**16
            inv *= 2 - denominator * inv; // inverse mod 2**32
            inv *= 2 - denominator * inv; // inverse mod 2**64
            inv *= 2 - denominator * inv; // inverse mod 2**128
            inv *= 2 - denominator * inv; // inverse mod 2**256

            // Because the division is now exact we can divide by multiplying
            // with the modular inverse of denominator. This will give us the
            // correct result modulo 2**256. Since the preconditions guarantee
            // that the outcome is less than 2**256, this is the final result.
            // We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inv;
            return result;
        }
    }

    /// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    function mulDivRoundingUp(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            result = mulDiv(a, b, denominator);
            if (mulmod(a, b, denominator) != 0) {
                require(++result > 0);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {BitMath} from "./BitMath.sol";
import {CustomRevert} from "./CustomRevert.sol";

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/TickMath.sol
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
    using CustomRevert for bytes4;

    /// @notice Thrown when the tick passed to #getSqrtPriceAtTick is not between MIN_TICK and MAX_TICK
    error InvalidTick(int24 tick);
    /// @notice Thrown when the price passed to #getTickAtSqrtPrice does not correspond to a price between MIN_TICK and MAX_TICK
    error InvalidSqrtPrice(uint160 sqrtPriceX96);

    /// @dev The minimum tick that may be passed to #getSqrtPriceAtTick computed from log base 1.0001 of 2**-128
    /// @dev If ever MIN_TICK and MAX_TICK are not centered around 0, the absTick logic in getSqrtPriceAtTick cannot be used
    int24 internal constant MIN_TICK = -887272;
    /// @dev The maximum tick that may be passed to #getSqrtPriceAtTick computed from log base 1.0001 of 2**128
    /// @dev If ever MIN_TICK and MAX_TICK are not centered around 0, the absTick logic in getSqrtPriceAtTick cannot be used
    int24 internal constant MAX_TICK = 887272;

    /// @dev The minimum tick spacing value drawn from the range of type int16 that is greater than 0, i.e. min from the range [1, 32767]
    int24 internal constant MIN_TICK_SPACING = 1;
    /// @dev The maximum tick spacing value drawn from the range of type int16, i.e. max from the range [1, 32767]
    int24 internal constant MAX_TICK_SPACING = type(int16).max;

    /// @dev The minimum value that can be returned from #getSqrtPriceAtTick. Equivalent to getSqrtPriceAtTick(MIN_TICK)
    uint160 internal constant MIN_SQRT_PRICE = 4295128739;
    /// @dev The maximum value that can be returned from #getSqrtPriceAtTick. Equivalent to getSqrtPriceAtTick(MAX_TICK)
    uint160 internal constant MAX_SQRT_PRICE = 1461446703485210103287273052203988822378723970342;
    /// @dev A threshold used for optimized bounds check, equals `MAX_SQRT_PRICE - MIN_SQRT_PRICE - 1`
    uint160 internal constant MAX_SQRT_PRICE_MINUS_MIN_SQRT_PRICE_MINUS_ONE = 1461446703485210103287273052203988822378723970342 - 4295128739 - 1;

    /// @notice Given a tickSpacing, compute the maximum usable tick
    function maxUsableTick(int24 tickSpacing) internal pure returns (int24) {
        unchecked {
            return (MAX_TICK / tickSpacing) * tickSpacing;
        }
    }

    /// @notice Given a tickSpacing, compute the minimum usable tick
    function minUsableTick(int24 tickSpacing) internal pure returns (int24) {
        unchecked {
            return (MIN_TICK / tickSpacing) * tickSpacing;
        }
    }

    /// @notice Calculates sqrt(1.0001^tick) * 2^96
    /// @dev Throws if |tick| > max tick
    /// @param tick The input tick for the above formula
    /// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the price of the two assets (currency1/currency0)
    /// at the given tick
    function getSqrtPriceAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
        unchecked {
            uint256 absTick;
            assembly ("memory-safe") {
                tick := signextend(2, tick)
                // mask = 0 if tick >= 0 else -1 (all 1s)
                let mask := sar(255, tick)
                // if tick >= 0, |tick| = tick = 0 ^ tick
                // if tick < 0, |tick| = ~~|tick| = ~(-|tick| - 1) = ~(tick - 1) = (-1) ^ (tick - 1)
                // either way, |tick| = mask ^ (tick + mask)
                absTick := xor(mask, add(mask, tick))
            }

            if (absTick > uint256(int256(MAX_TICK))) InvalidTick.selector.revertWith(tick);

            // The tick is decomposed into bits, and for each bit with index i that is set, the product of 1/sqrt(1.0001^(2^i))
            // is calculated (using Q128.128). The constants used for this calculation are rounded to the nearest integer

            // Equivalent to:
            //     price = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
            //     or price = int(2**128 / sqrt(1.0001)) if (absTick & 0x1) else 1 << 128
            uint256 price;
            assembly ("memory-safe") {
                price := xor(shl(128, 1), mul(xor(shl(128, 1), 0xfffcb933bd6fad37aa2d162d1a594001), and(absTick, 0x1)))
            }
            if (absTick & 0x2 != 0) price = (price * 0xfff97272373d413259a46990580e213a) >> 128;
            if (absTick & 0x4 != 0) price = (price * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
            if (absTick & 0x8 != 0) price = (price * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
            if (absTick & 0x10 != 0) price = (price * 0xffcb9843d60f6159c9db58835c926644) >> 128;
            if (absTick & 0x20 != 0) price = (price * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
            if (absTick & 0x40 != 0) price = (price * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
            if (absTick & 0x80 != 0) price = (price * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
            if (absTick & 0x100 != 0) price = (price * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
            if (absTick & 0x200 != 0) price = (price * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
            if (absTick & 0x400 != 0) price = (price * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
            if (absTick & 0x800 != 0) price = (price * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
            if (absTick & 0x1000 != 0) price = (price * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
            if (absTick & 0x2000 != 0) price = (price * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
            if (absTick & 0x4000 != 0) price = (price * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
            if (absTick & 0x8000 != 0) price = (price * 0x31be135f97d08fd981231505542fcfa6) >> 128;
            if (absTick & 0x10000 != 0) price = (price * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
            if (absTick & 0x20000 != 0) price = (price * 0x5d6af8dedb81196699c329225ee604) >> 128;
            if (absTick & 0x40000 != 0) price = (price * 0x2216e584f5fa1ea926041bedfe98) >> 128;
            if (absTick & 0x80000 != 0) price = (price * 0x48a170391f7dc42444e8fa2) >> 128;

            assembly ("memory-safe") {
                // if (tick > 0) price = type(uint256).max / price;
                if sgt(tick, 0) {
                    price := div(not(0), price)
                }

                // this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
                // we then downcast because we know the result always fits within 160 bits due to our tick input constraint
                // we round up in the division so getTickAtSqrtPrice of the output price is always consistent
                // `sub(shl(32, 1), 1)` is `type(uint32).max`
                // `price + type(uint32).max` will not overflow because `price` fits in 192 bits
                sqrtPriceX96 := shr(32, add(price, sub(shl(32, 1), 1)))
            }
        }
    }

    /// @notice Calculates the greatest tick value such that getSqrtPriceAtTick(tick) <= sqrtPriceX96
    /// @dev Throws in case sqrtPriceX96 < MIN_SQRT_PRICE, as MIN_SQRT_PRICE is the lowest value getSqrtPriceAtTick may
    /// ever return.
    /// @param sqrtPriceX96 The sqrt price for which to compute the tick as a Q64.96
    /// @return tick The greatest tick for which the getSqrtPriceAtTick(tick) is less than or equal to the input sqrtPriceX96
    function getTickAtSqrtPrice(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
        unchecked {
            // Equivalent: if (sqrtPriceX96 < MIN_SQRT_PRICE || sqrtPriceX96 >= MAX_SQRT_PRICE) revert InvalidSqrtPrice();
            // second inequality must be >= because the price can never reach the price at the max tick
            // if sqrtPriceX96 < MIN_SQRT_PRICE, the `sub` underflows and `gt` is true
            // if sqrtPriceX96 >= MAX_SQRT_PRICE, sqrtPriceX96 - MIN_SQRT_PRICE > MAX_SQRT_PRICE - MIN_SQRT_PRICE - 1
            if ((sqrtPriceX96 - MIN_SQRT_PRICE) > MAX_SQRT_PRICE_MINUS_MIN_SQRT_PRICE_MINUS_ONE) {
                InvalidSqrtPrice.selector.revertWith(sqrtPriceX96);
            }

            uint256 price = uint256(sqrtPriceX96) << 32;

            uint256 r = price;
            uint256 msb = BitMath.mostSignificantBit(r);

            if (msb >= 128) r = price >> (msb - 127);
            else r = price << (127 - msb);

            int256 log_2 = (int256(msb) - 128) << 64;

            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(63, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(62, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(61, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(60, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(59, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(58, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(57, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(56, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(55, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(54, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(53, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(52, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(51, f))
                r := shr(f, r)
            }
            assembly ("memory-safe") {
                r := shr(127, mul(r, r))
                let f := shr(128, r)
                log_2 := or(log_2, shl(50, f))
            }

            int256 log_sqrt10001 = log_2 * 255738958999603826347141; // Q22.128 number

            // Magic number represents the ceiling of the maximum value of the error when approximating log_sqrt10001(x)
            int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);

            // Magic number represents the minimum value of the error when approximating log_sqrt10001(x), when
            // sqrtPrice is from the range (2^-64, 2^64). This is safe as MIN_SQRT_PRICE is more than 2^-64. If MIN_SQRT_PRICE
            // is changed, this may need to be changed too
            int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);

            tick = tickLow == tickHi
                ? tickLow
                : getSqrtPriceAtTick(tickHi) <= sqrtPriceX96
                    ? tickHi
                    : tickLow;
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.20;

import "./FullMath.sol";
import "./FixedPoint96.sol";

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/test/utils/LiquidityAmounts.sol
/// @title Liquidity amount functions
/// @notice Provides functions for computing liquidity amounts from token amounts and prices
library LiquidityAmounts {
    /// @notice Downcasts uint256 to uint128
    /// @param x The uint258 to be downcasted
    /// @return y The passed value, downcasted to uint128
    function toUint128(uint256 x) private pure returns (uint128 y) {
        require((y = uint128(x)) == x, "liquidity overflow");
    }

    /// @notice Computes the amount of liquidity received for a given amount of token0 and price range
    /// @dev Calculates amount0 * (sqrt(upper) * sqrt(lower)) / (sqrt(upper) - sqrt(lower))
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param amount0 The amount0 being sent in
    /// @return liquidity The amount of returned liquidity
    function getLiquidityForAmount0(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint256 amount0) internal pure returns (uint128 liquidity) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);
        uint256 intermediate = FullMath.mulDiv(sqrtPriceAX96, sqrtPriceBX96, FixedPoint96.Q96);
        return toUint128(FullMath.mulDiv(amount0, intermediate, sqrtPriceBX96 - sqrtPriceAX96));
    }

    /// @notice Computes the amount of liquidity received for a given amount of token1 and price range
    /// @dev Calculates amount1 / (sqrt(upper) - sqrt(lower)).
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param amount1 The amount1 being sent in
    /// @return liquidity The amount of returned liquidity
    function getLiquidityForAmount1(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint256 amount1) internal pure returns (uint128 liquidity) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);
        return toUint128(FullMath.mulDiv(amount1, FixedPoint96.Q96, sqrtPriceBX96 - sqrtPriceAX96));
    }

    /// @notice Computes the maximum amount of liquidity received for a given amount of token0, token1, the current
    /// pool prices and the prices at the tick boundaries
    /// @param sqrtPriceX96 A sqrt price representing the current pool prices
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param amount0 The amount of token0 being sent in
    /// @param amount1 The amount of token1 being sent in
    /// @return liquidity The maximum amount of liquidity received
    function getLiquidityForAmounts(
        uint160 sqrtPriceX96,
        uint160 sqrtPriceAX96,
        uint160 sqrtPriceBX96,
        uint256 amount0,
        uint256 amount1
    ) internal pure returns (uint128 liquidity) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);

        if (sqrtPriceX96 <= sqrtPriceAX96) {
            liquidity = getLiquidityForAmount0(sqrtPriceAX96, sqrtPriceBX96, amount0);
        } else if (sqrtPriceX96 < sqrtPriceBX96) {
            uint128 liquidity0 = getLiquidityForAmount0(sqrtPriceX96, sqrtPriceBX96, amount0);
            uint128 liquidity1 = getLiquidityForAmount1(sqrtPriceAX96, sqrtPriceX96, amount1);

            liquidity = liquidity0 < liquidity1 ? liquidity0 : liquidity1;
        } else {
            liquidity = getLiquidityForAmount1(sqrtPriceAX96, sqrtPriceBX96, amount1);
        }
    }

    /// @notice Computes the amount of token0 for a given amount of liquidity and a price range
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param liquidity The liquidity being valued
    /// @return amount0 The amount of token0
    function getAmount0ForLiquidity(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity) internal pure returns (uint256 amount0) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);

        return FullMath.mulDiv(uint256(liquidity) << FixedPoint96.RESOLUTION, sqrtPriceBX96 - sqrtPriceAX96, sqrtPriceBX96) / sqrtPriceAX96;
    }

    /// @notice Computes the amount of token1 for a given amount of liquidity and a price range
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param liquidity The liquidity being valued
    /// @return amount1 The amount of token1
    function getAmount1ForLiquidity(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity) internal pure returns (uint256 amount1) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);

        return FullMath.mulDiv(liquidity, sqrtPriceBX96 - sqrtPriceAX96, FixedPoint96.Q96);
    }

    /// @notice Computes the token0 and token1 value for a given amount of liquidity, the current
    /// pool prices and the prices at the tick boundaries
    /// @param sqrtPriceX96 A sqrt price representing the current pool prices
    /// @param sqrtPriceAX96 A sqrt price representing the first tick boundary
    /// @param sqrtPriceBX96 A sqrt price representing the second tick boundary
    /// @param liquidity The liquidity being valued
    /// @return amount0 The amount of token0
    /// @return amount1 The amount of token1
    function getAmountsForLiquidity(
        uint160 sqrtPriceX96,
        uint160 sqrtPriceAX96,
        uint160 sqrtPriceBX96,
        uint128 liquidity
    ) internal pure returns (uint256 amount0, uint256 amount1) {
        if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);

        if (sqrtPriceX96 <= sqrtPriceAX96) {
            amount0 = getAmount0ForLiquidity(sqrtPriceAX96, sqrtPriceBX96, liquidity);
        } else if (sqrtPriceX96 < sqrtPriceBX96) {
            amount0 = getAmount0ForLiquidity(sqrtPriceX96, sqrtPriceBX96, liquidity);
            amount1 = getAmount1ForLiquidity(sqrtPriceAX96, sqrtPriceX96, liquidity);
        } else {
            amount1 = getAmount1ForLiquidity(sqrtPriceAX96, sqrtPriceBX96, liquidity);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {PoolConfiguration} from "../interfaces/ICoin.sol";
import {CoinLegacy} from "./CoinLegacy.sol";
import {CoinDopplerUniV3} from "./CoinDopplerUniV3.sol";
import {CoinConfigurationVersions} from "./CoinConfigurationVersions.sol";
import {LpPosition} from "../types/LpPosition.sol";

library CoinSetup {
    error InvalidPoolVersion();

    function setupPoolWithVersion(
        uint8 version,
        bytes memory poolConfig_,
        bool isCoinToken0,
        address weth
    ) internal pure returns (uint160 sqrtPriceX96, PoolConfiguration memory poolConfiguration) {
        if (version == CoinConfigurationVersions.LEGACY_POOL_VERSION) {
            (sqrtPriceX96, poolConfiguration) = CoinLegacy.setupPool(isCoinToken0, poolConfig_, weth);
        } else if (version == CoinConfigurationVersions.DOPPLER_UNI_V3_POOL_VERSION) {
            (sqrtPriceX96, poolConfiguration) = CoinDopplerUniV3.setupPool(isCoinToken0, poolConfig_);
        } else {
            revert InvalidPoolVersion();
        }
    }

    function calculatePositions(bool isCoinToken0, PoolConfiguration memory poolConfiguration) internal pure returns (LpPosition[] memory positions) {
        if (poolConfiguration.version == CoinConfigurationVersions.LEGACY_POOL_VERSION) {
            positions = CoinLegacy.calculatePositions(isCoinToken0, poolConfiguration);
        } else if (poolConfiguration.version == CoinConfigurationVersions.DOPPLER_UNI_V3_POOL_VERSION) {
            positions = CoinDopplerUniV3.calculatePositions(isCoinToken0, poolConfiguration);
        } else {
            revert InvalidPoolVersion();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

library MarketConstants {
    /// @notice The number of coins allocated to the liquidity pool
    /// @dev 990 million coins
    uint256 internal constant POOL_LAUNCH_SUPPLY = 990_000_000e18;

    /// @dev Constant used to increase precision during calculations
    uint256 constant WAD = 1e18;

    /// @notice The LP fee
    /// @dev 10000 basis points = 1%
    uint24 internal constant LP_FEE = 10000;

    /// @notice The spacing for 1% pools
    /// @dev 200 ticks
    int24 internal constant TICK_SPACING = 200;

    /// @notice The minimum lower tick for legacy single LP WETH pools
    int24 internal constant LP_TICK_LOWER_WETH = -208200;

    /// @notice The upper tick for legacy single LP WETH pools
    int24 internal constant LP_TICK_UPPER = 887200;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

struct LpPosition {
    int24 tickLower;
    int24 tickUpper;
    uint128 liquidity;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

/// @notice The state of the pool configuration, as a doppler configuration
struct PoolState {
    /// @notice The address of the base asset
    address asset;
    /// @notice The address of the currency to trade the base asset for
    address numeraire;
    /// @notice The lower tick of the LP range set
    int24 tickLower;
    /// @notice The upper tick of the LP range set
    int24 tickUpper;
    /// @notice The number of positions in the LP range set
    uint16 numPositions;
    /// @notice Whether the pool is initialized (true for this implementation)
    bool isInitialized;
    /// @notice Whether the pool is exited to a market (false for this implementation)
    bool isExited;
    /// @notice The maximum share to be sold – the size of the discovery supply
    uint256 maxShareToBeSold;
    /// @notice The total tokens on the bonding curve
    uint256 totalTokensOnBondingCurve;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

interface IDopplerErrors {
    error NumDiscoveryPositionsOutOfRange();

    error CannotMintZeroLiquidity();

    /// @notice Thrown when the tick range is misordered
    error InvalidTickRangeMisordered(int24 tickLower, int24 tickUpper);

    /// @notice Thrown when the max share to be sold exceeds the maximum unit
    error MaxShareToBeSoldExceeded(uint256 value, uint256 limit);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;

        string _name;
        string _version;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }

    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;

        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");

        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }

    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }

    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract NoncesUpgradeable is Initializable {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces
    struct NoncesStorage {
        mapping(address account => uint256) _nonces;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Nonces")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;

    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {
        assembly {
            $.slot := NoncesStorageLocation
        }
    }

    function __Nonces_init() internal onlyInitializing {
    }

    function __Nonces_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        return $._nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return $._nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.17;

interface IVersionedContract {
    function contractVersion() external pure returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/BitMath.sol
/// @title BitMath
/// @dev This library provides functionality for computing bit properties of an unsigned integer
/// @author Solady (https://github.com/Vectorized/solady/blob/8200a70e8dc2a77ecb074fc2e99a2a0d36547522/src/utils/LibBit.sol)
library BitMath {
    /// @notice Returns the index of the most significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @param x the value for which to compute the most significant bit, must be greater than 0
    /// @return r the index of the most significant bit
    function mostSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);

        assembly ("memory-safe") {
            r := shl(7, lt(0xffffffffffffffffffffffffffffffff, x))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            // forgefmt: disable-next-item
            r := or(r, byte(and(0x1f, shr(shr(r, x), 0x8421084210842108cc6318c6db6d54be)), 0x0706060506020500060203020504000106050205030304010505030400000000))
        }
    }

    /// @notice Returns the index of the least significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @param x the value for which to compute the least significant bit, must be greater than 0
    /// @return r the index of the least significant bit
    function leastSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);

        assembly ("memory-safe") {
            // Isolate the least significant bit.
            x := and(x, sub(0, x))
            // For the upper 3 bits of the result, use a De Bruijn-like lookup.
            // Credit to adhusson: https://blog.adhusson.com/cheap-find-first-set-evm/
            // forgefmt: disable-next-item
            r := shl(
                5,
                shr(
                    252,
                    shl(
                        shl(2, shr(250, mul(x, 0xb6db6db6ddddddddd34d34d349249249210842108c6318c639ce739cffffffff))),
                        0x8040405543005266443200005020610674053026020000107506200176117077
                    )
                )
            )
            // For the lower 5 bits of the result, use a De Bruijn lookup.
            // forgefmt: disable-next-item
            r := or(r, byte(and(div(0xd76453e0, shr(r, x)), 0x1f), 0x001f0d1e100c1d070f090b19131c1706010e11080a1a141802121b1503160405))
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/CustomRevert.sol
/// @title Library for reverting with custom errors efficiently
/// @notice Contains functions for reverting with custom errors with different argument types efficiently
/// @dev To use this library, declare `using CustomRevert for bytes4;` and replace `revert CustomError()` with
/// `CustomError.selector.revertWith()`
/// @dev The functions may tamper with the free memory pointer but it is fine since the call context is exited immediately
library CustomRevert {
    /// @dev ERC-7751 error for wrapping bubbled up reverts
    error WrappedError(address target, bytes4 selector, bytes reason, bytes details);

    /// @dev Reverts with the selector of a custom error in the scratch space
    function revertWith(bytes4 selector) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            revert(0, 0x04)
        }
    }

    /// @dev Reverts with a custom error with an address argument in the scratch space
    function revertWith(bytes4 selector, address addr) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(addr, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with an int24 argument in the scratch space
    function revertWith(bytes4 selector, int24 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, signextend(2, value))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with a uint160 argument in the scratch space
    function revertWith(bytes4 selector, uint160 value) internal pure {
        assembly ("memory-safe") {
            mstore(0, selector)
            mstore(0x04, and(value, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(0, 0x24)
        }
    }

    /// @dev Reverts with a custom error with two int24 arguments
    function revertWith(bytes4 selector, int24 value1, int24 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), signextend(2, value1))
            mstore(add(fmp, 0x24), signextend(2, value2))
            revert(fmp, 0x44)
        }
    }

    /// @dev Reverts with a custom error with two uint160 arguments
    function revertWith(bytes4 selector, uint160 value1, uint160 value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }

    /// @dev Reverts with a custom error with two address arguments
    function revertWith(bytes4 selector, address value1, address value2) internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            mstore(fmp, selector)
            mstore(add(fmp, 0x04), and(value1, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(value2, 0xffffffffffffffffffffffffffffffffffffffff))
            revert(fmp, 0x44)
        }
    }

    /// @notice bubble up the revert message returned by a call and revert with a wrapped ERC-7751 error
    /// @dev this method can be vulnerable to revert data bombs
    function bubbleUpAndRevertWith(address revertingContract, bytes4 revertingFunctionSelector, bytes4 additionalContext) internal pure {
        bytes4 wrappedErrorSelector = WrappedError.selector;
        assembly ("memory-safe") {
            // Ensure the size of the revert data is a multiple of 32 bytes
            let encodedDataSize := mul(div(add(returndatasize(), 31), 32), 32)

            let fmp := mload(0x40)

            // Encode wrapped error selector, address, function selector, offset, additional context, size, revert reason
            mstore(fmp, wrappedErrorSelector)
            mstore(add(fmp, 0x04), and(revertingContract, 0xffffffffffffffffffffffffffffffffffffffff))
            mstore(add(fmp, 0x24), and(revertingFunctionSelector, 0xffffffff00000000000000000000000000000000000000000000000000000000))
            // offset revert reason
            mstore(add(fmp, 0x44), 0x80)
            // offset additional context
            mstore(add(fmp, 0x64), add(0xa0, encodedDataSize))
            // size revert reason
            mstore(add(fmp, 0x84), returndatasize())
            // revert reason
            returndatacopy(add(fmp, 0xa4), 0, returndatasize())
            // size additional context
            mstore(add(fmp, add(0xa4, encodedDataSize)), 0x04)
            // additional context
            mstore(add(fmp, add(0xc4, encodedDataSize)), and(additionalContext, 0xffffffff00000000000000000000000000000000000000000000000000000000))
            revert(fmp, add(0xe4, encodedDataSize))
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/FixedPoint96.sol
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
    uint8 internal constant RESOLUTION = 96;
    uint256 internal constant Q96 = 0x1000000000000000000000000;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {PoolConfiguration, ICoin} from "../interfaces/ICoin.sol";
import {TickMath} from "../utils/uniswap/TickMath.sol";
import {MarketConstants} from "./MarketConstants.sol";
import {LiquidityAmounts} from "../utils/uniswap/LiquidityAmounts.sol";
import {LpPosition} from "../types/LpPosition.sol";
import {CoinConfigurationVersions} from "./CoinConfigurationVersions.sol";

library CoinLegacy {
    function setupPool(
        bool isCoinToken0,
        bytes memory poolConfig_,
        address weth
    ) internal pure returns (uint160 sqrtPriceX96, PoolConfiguration memory poolConfiguration) {
        (, address currency, int24 tickLower_) = abi.decode(poolConfig_, (uint8, address, int24));

        // If WETH is the pool's currency, validate the lower tick
        if ((currency == weth || currency == address(0)) && tickLower_ > MarketConstants.LP_TICK_LOWER_WETH) {
            revert ICoin.InvalidWethLowerTick();
        }

        int24 savedTickLower = isCoinToken0 ? tickLower_ : -MarketConstants.LP_TICK_UPPER;
        int24 savedTickUpper = isCoinToken0 ? MarketConstants.LP_TICK_UPPER : -tickLower_;

        sqrtPriceX96 = TickMath.getSqrtPriceAtTick(isCoinToken0 ? savedTickLower : savedTickUpper);

        poolConfiguration = PoolConfiguration({
            version: CoinConfigurationVersions.LEGACY_POOL_VERSION,
            tickLower: savedTickLower,
            tickUpper: savedTickUpper,
            numPositions: 1,
            maxDiscoverySupplyShare: 0
        });
    }

    function calculatePositions(bool isCoinToken0, PoolConfiguration memory poolConfiguration) internal pure returns (LpPosition[] memory positions) {
        positions = new LpPosition[](1);

        uint160 sqrtPriceX96 = TickMath.getSqrtPriceAtTick(isCoinToken0 ? poolConfiguration.tickLower : poolConfiguration.tickUpper);
        uint160 farSqrtPriceX96 = TickMath.getSqrtPriceAtTick(isCoinToken0 ? poolConfiguration.tickUpper : poolConfiguration.tickLower);
        uint128 liquidity = isCoinToken0
            ? LiquidityAmounts.getLiquidityForAmount0(sqrtPriceX96, farSqrtPriceX96, MarketConstants.POOL_LAUNCH_SUPPLY)
            : LiquidityAmounts.getLiquidityForAmount1(sqrtPriceX96, farSqrtPriceX96, MarketConstants.POOL_LAUNCH_SUPPLY);
        positions[0] = LpPosition({tickLower: poolConfiguration.tickLower, tickUpper: poolConfiguration.tickUpper, liquidity: liquidity});
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import {PoolConfiguration} from "../interfaces/ICoin.sol";
import {TickMath} from "../utils/uniswap/TickMath.sol";
import {CoinConfigurationVersions} from "./CoinConfigurationVersions.sol";
import {ICoin} from "../interfaces/ICoin.sol";
import {LpPosition} from "../types/LpPosition.sol";
import {MarketConstants} from "./MarketConstants.sol";
import {FullMath} from "../utils/uniswap/FullMath.sol";
import {SqrtPriceMath} from "../utils/uniswap/SqrtPriceMath.sol";
import {LiquidityAmounts} from "../utils/uniswap/LiquidityAmounts.sol";
import {IDopplerErrors} from "../interfaces/IDopplerErrors.sol";

library CoinDopplerUniV3 {
    function setupPool(bool isCoinToken0, bytes memory poolConfig_) internal pure returns (uint160 sqrtPriceX96, PoolConfiguration memory poolConfiguration) {
        (, , int24 tickLower_, int24 tickUpper_, uint16 numDiscoveryPositions_, uint256 maxDiscoverySupplyShare_) = abi.decode(
            poolConfig_,
            (uint8, address, int24, int24, uint16, uint256)
        );

        require(numDiscoveryPositions_ > 1 && numDiscoveryPositions_ <= 200, IDopplerErrors.NumDiscoveryPositionsOutOfRange());

        if (maxDiscoverySupplyShare_ > MarketConstants.WAD) {
            revert IDopplerErrors.MaxShareToBeSoldExceeded(maxDiscoverySupplyShare_, MarketConstants.WAD);
        }

        int24 savedTickLower = isCoinToken0 ? tickLower_ : -tickUpper_;
        int24 savedTickUpper = isCoinToken0 ? tickUpper_ : -tickLower_;

        sqrtPriceX96 = TickMath.getSqrtPriceAtTick(isCoinToken0 ? savedTickLower : savedTickUpper);

        poolConfiguration = PoolConfiguration({
            version: CoinConfigurationVersions.DOPPLER_UNI_V3_POOL_VERSION,
            tickLower: savedTickLower,
            tickUpper: savedTickUpper,
            numPositions: numDiscoveryPositions_,
            maxDiscoverySupplyShare: maxDiscoverySupplyShare_
        });
    }

    function calculatePositions(bool isCoinToken0, PoolConfiguration memory poolConfiguration) internal pure returns (LpPosition[] memory positions) {
        positions = new LpPosition[](poolConfiguration.numPositions);

        uint256 discoverySupply = FullMath.mulDiv(MarketConstants.POOL_LAUNCH_SUPPLY, poolConfiguration.maxDiscoverySupplyShare, MarketConstants.WAD);

        (positions, discoverySupply) = calculateLogNormalDistribution(
            poolConfiguration.tickLower,
            poolConfiguration.tickUpper,
            MarketConstants.TICK_SPACING,
            isCoinToken0,
            discoverySupply,
            // Populate all positions before the last position (the tail position)
            poolConfiguration.numPositions - 1, // Only discovery positions
            positions
        );

        uint256 tailSupply = MarketConstants.POOL_LAUNCH_SUPPLY - discoverySupply;

        // Calculate the tail position (the last position in the array)
        positions[poolConfiguration.numPositions - 1] = calculateLpTail(
            poolConfiguration.tickLower,
            poolConfiguration.tickUpper,
            isCoinToken0,
            tailSupply,
            MarketConstants.TICK_SPACING
        );
    }

    /// @notice Calculates the distribution of liquidity positions across tick ranges.
    /// @dev For example, with 1000 tokens and 10 bins starting at tick 0:
    ///      - Creates positions: [0,10], [1,10], [2,10], ..., [9,10]
    ///      - Each position gets an equal share of tokens (100 tokens each)
    ///      This creates a linear distribution of liquidity across the tick range
    /// @dev Changed in DopplerUniswapV3:
    ///      - Added `LpPosition[] memory newPositions` as an input parameter, removing the internal allocation (`new LpPosition[](totalPositions + 1)`).
    ///      - Removed the calculation and accumulation of the `reserves` variable entirely.
    ///      - Return value changed from `(LpPosition[] memory, uint256)` (positions, reserves) to `(LpPosition[] memory, uint256)` (positions, totalAssetsSold).
    /// @param tickLower The lower tick of the LP range set
    /// @param tickUpper The upper tick of the LP range set
    /// @param tickSpacing The tick spacing of the LP range set
    /// @param isToken0 Whether the base asset is the token0 of the pair
    /// @param discoverySupply The total supply of the base asset to be sold
    /// @param totalPositions The total number of positions in the LP range set
    /// @param newPositions The array of new positions to be created
    /// @return newPositions The array of new positions to be created
    /// @return totalAssetsSold The total assets used in the LP range set
    function calculateLogNormalDistribution(
        int24 tickLower,
        int24 tickUpper,
        int24 tickSpacing,
        bool isToken0,
        uint256 discoverySupply,
        uint16 totalPositions,
        LpPosition[] memory newPositions
    ) internal pure returns (LpPosition[] memory, uint256) {
        int24 farTick = isToken0 ? tickUpper : tickLower;
        int24 closeTick = isToken0 ? tickLower : tickUpper;

        int24 spread = tickUpper - tickLower;

        uint160 farSqrtPriceX96 = TickMath.getSqrtPriceAtTick(farTick);
        uint256 amountPerPosition = FullMath.mulDiv(discoverySupply, MarketConstants.WAD, totalPositions * MarketConstants.WAD);
        uint256 totalAssetsSold;

        for (uint256 i; i < totalPositions; i++) {
            // calculate the ticks position * 1/n to optimize the division
            int24 startingTick = isToken0
                ? closeTick + int24(uint24(FullMath.mulDiv(i, uint256(uint24(spread)), totalPositions)))
                : closeTick - int24(uint24(FullMath.mulDiv(i, uint256(uint24(spread)), totalPositions)));

            // round the tick to the nearest bin
            startingTick = alignTickToTickSpacing(isToken0, startingTick, tickSpacing);

            if (startingTick != farTick) {
                uint160 startingSqrtPriceX96 = TickMath.getSqrtPriceAtTick(startingTick);

                // if discoverySupply is 0, we skip the liquidity calculation as we are burning max liquidity
                // in each position
                uint128 liquidity;
                if (discoverySupply != 0) {
                    liquidity = isToken0
                        ? LiquidityAmounts.getLiquidityForAmount0(startingSqrtPriceX96, farSqrtPriceX96, amountPerPosition)
                        : LiquidityAmounts.getLiquidityForAmount1(farSqrtPriceX96, startingSqrtPriceX96, amountPerPosition);

                    totalAssetsSold += (
                        isToken0
                            ? SqrtPriceMath.getAmount0Delta(startingSqrtPriceX96, farSqrtPriceX96, liquidity, true)
                            : SqrtPriceMath.getAmount1Delta(farSqrtPriceX96, startingSqrtPriceX96, liquidity, true)
                    );
                }

                newPositions[i] = LpPosition({
                    tickLower: farSqrtPriceX96 < startingSqrtPriceX96 ? farTick : startingTick,
                    tickUpper: farSqrtPriceX96 < startingSqrtPriceX96 ? startingTick : farTick,
                    liquidity: liquidity
                });
            }
        }

        require(totalAssetsSold <= discoverySupply, IDopplerErrors.CannotMintZeroLiquidity());

        return (newPositions, totalAssetsSold);
    }

    /// @notice Calculates the final LP position that extends from the far tick to the pool's min/max tick
    /// @dev This position ensures price equivalence between Uniswap v2 and v3 pools beyond the LBP range
    /// @dev Changed in DopplerUniswapV3:
    ///      - Removed parameters: `id`, `reserves`
    ///      - Liquidity calculation is based *solely* on the provided `tailSupply` within the calculated tail tick range using `LiquidityAmounts.getLiquidityForAmount0` or `getLiquidityForAmount1`.
    function calculateLpTail(
        int24 tickLower,
        int24 tickUpper,
        bool isToken0,
        uint256 tailSupply,
        int24 tickSpacing
    ) internal pure returns (LpPosition memory lpTail) {
        int24 posTickLower = isToken0 ? tickUpper : alignTickToTickSpacing(false, TickMath.MIN_TICK, tickSpacing);
        int24 posTickUpper = isToken0 ? alignTickToTickSpacing(true, TickMath.MAX_TICK, tickSpacing) : tickLower;

        require(posTickLower < posTickUpper, IDopplerErrors.InvalidTickRangeMisordered(posTickLower, posTickUpper));

        // Calculate the sqrtPrices for the tail range boundaries
        uint160 sqrtPriceA = TickMath.getSqrtPriceAtTick(posTickLower);
        uint160 sqrtPriceB = TickMath.getSqrtPriceAtTick(posTickUpper);

        // Calculate liquidity only based on the tail range supply
        uint128 lpTailLiquidity = isToken0
            ? LiquidityAmounts.getLiquidityForAmount0(sqrtPriceA, sqrtPriceB, tailSupply)
            : LiquidityAmounts.getLiquidityForAmount1(sqrtPriceA, sqrtPriceB, tailSupply);

        lpTail = LpPosition({tickLower: posTickLower, tickUpper: posTickUpper, liquidity: lpTailLiquidity});
    }

    /// @notice Aligns a tick to the nearest tick spacing
    /// @dev The tickSpacing parameter cannot be zero
    /// @param isToken0 Whether the base asset is the token0 of the pair
    /// @param tick The tick to align
    /// @param tickSpacing The tick spacing of the pair
    /// @return alignedTick The aligned tick
    function alignTickToTickSpacing(bool isToken0, int24 tick, int24 tickSpacing) internal pure returns (int24) {
        if (isToken0) {
            // Round down if isToken0
            if (tick < 0) {
                // If the tick is negative, we round up (negatively) the negative result to round down
                return ((tick - tickSpacing + 1) / tickSpacing) * tickSpacing;
            } else {
                // Else if positive, we simply round down
                return (tick / tickSpacing) * tickSpacing;
            }
        } else {
            // Round up if isToken1
            if (tick < 0) {
                // If the tick is negative, we round down the negative result to round up
                return (tick / tickSpacing) * tickSpacing;
            } else {
                // Else if positive, we simply round up
                return ((tick + tickSpacing - 1) / tickSpacing) * tickSpacing;
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

library CoinConfigurationVersions {
    uint8 constant LEGACY_POOL_VERSION = 1;
    uint8 constant DOPPLER_UNI_V3_POOL_VERSION = 2;

    error InvalidPoolVersion();
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {SafeCast} from "./SafeCast.sol";

import {FullMath} from "./FullMath.sol";
import {UnsafeMath} from "./UnsafeMath.sol";
import {FixedPoint96} from "./FixedPoint96.sol";

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/SqrtPriceMath.sol
/// @title Functions based on Q64.96 sqrt price and liquidity
/// @notice Contains the math that uses square root of price as a Q64.96 and liquidity to compute deltas
library SqrtPriceMath {
    using SafeCast for uint256;

    error InvalidPriceOrLiquidity();
    error InvalidPrice();
    error NotEnoughLiquidity();
    error PriceOverflow();

    /// @notice Gets the next sqrt price given a delta of currency0
    /// @dev Always rounds up, because in the exact output case (increasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (decreasing price) we need to move the
    /// price less in order to not send too much output.
    /// The most precise formula for this is liquidity * sqrtPX96 / (liquidity +- amount * sqrtPX96),
    /// if this is impossible because of overflow, we calculate liquidity / (liquidity / sqrtPX96 +- amount).
    /// @param sqrtPX96 The starting price, i.e. before accounting for the currency0 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of currency0 to add or remove from virtual reserves
    /// @param add Whether to add or remove the amount of currency0
    /// @return The price after adding or removing amount, depending on add
    function getNextSqrtPriceFromAmount0RoundingUp(uint160 sqrtPX96, uint128 liquidity, uint256 amount, bool add) internal pure returns (uint160) {
        // we short circuit amount == 0 because the result is otherwise not guaranteed to equal the input price
        if (amount == 0) return sqrtPX96;
        uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;

        if (add) {
            unchecked {
                uint256 product = amount * sqrtPX96;
                if (product / amount == sqrtPX96) {
                    uint256 denominator = numerator1 + product;
                    if (denominator >= numerator1) {
                        // always fits in 160 bits
                        return uint160(FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator));
                    }
                }
            }
            // denominator is checked for overflow
            return uint160(UnsafeMath.divRoundingUp(numerator1, (numerator1 / sqrtPX96) + amount));
        } else {
            unchecked {
                uint256 product = amount * sqrtPX96;
                // if the product overflows, we know the denominator underflows
                // in addition, we must check that the denominator does not underflow
                // equivalent: if (product / amount != sqrtPX96 || numerator1 <= product) revert PriceOverflow();
                assembly ("memory-safe") {
                    if iszero(and(eq(div(product, amount), and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)), gt(numerator1, product))) {
                        mstore(0, 0xf5c787f1) // selector for PriceOverflow()
                        revert(0x1c, 0x04)
                    }
                }
                uint256 denominator = numerator1 - product;
                return FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator).toUint160();
            }
        }
    }

    /// @notice Gets the next sqrt price given a delta of currency1
    /// @dev Always rounds down, because in the exact output case (decreasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (increasing price) we need to move the
    /// price less in order to not send too much output.
    /// The formula we compute is within <1 wei of the lossless version: sqrtPX96 +- amount / liquidity
    /// @param sqrtPX96 The starting price, i.e., before accounting for the currency1 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of currency1 to add, or remove, from virtual reserves
    /// @param add Whether to add, or remove, the amount of currency1
    /// @return The price after adding or removing `amount`
    function getNextSqrtPriceFromAmount1RoundingDown(uint160 sqrtPX96, uint128 liquidity, uint256 amount, bool add) internal pure returns (uint160) {
        // if we're adding (subtracting), rounding down requires rounding the quotient down (up)
        // in both cases, avoid a mulDiv for most inputs
        if (add) {
            uint256 quotient = (
                amount <= type(uint160).max ? (amount << FixedPoint96.RESOLUTION) / liquidity : FullMath.mulDiv(amount, FixedPoint96.Q96, liquidity)
            );

            return (uint256(sqrtPX96) + quotient).toUint160();
        } else {
            uint256 quotient = (
                amount <= type(uint160).max
                    ? UnsafeMath.divRoundingUp(amount << FixedPoint96.RESOLUTION, liquidity)
                    : FullMath.mulDivRoundingUp(amount, FixedPoint96.Q96, liquidity)
            );

            // equivalent: if (sqrtPX96 <= quotient) revert NotEnoughLiquidity();
            assembly ("memory-safe") {
                if iszero(gt(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff), quotient)) {
                    mstore(0, 0x4323a555) // selector for NotEnoughLiquidity()
                    revert(0x1c, 0x04)
                }
            }
            // always fits 160 bits
            unchecked {
                return uint160(sqrtPX96 - quotient);
            }
        }
    }

    /// @notice Gets the next sqrt price given an input amount of currency0 or currency1
    /// @dev Throws if price or liquidity are 0, or if the next price is out of bounds
    /// @param sqrtPX96 The starting price, i.e., before accounting for the input amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountIn How much of currency0, or currency1, is being swapped in
    /// @param zeroForOne Whether the amount in is currency0 or currency1
    /// @return uint160 The price after adding the input amount to currency0 or currency1
    function getNextSqrtPriceFromInput(uint160 sqrtPX96, uint128 liquidity, uint256 amountIn, bool zeroForOne) internal pure returns (uint160) {
        // equivalent: if (sqrtPX96 == 0 || liquidity == 0) revert InvalidPriceOrLiquidity();
        assembly ("memory-safe") {
            if or(iszero(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)), iszero(and(liquidity, 0xffffffffffffffffffffffffffffffff))) {
                mstore(0, 0x4f2461b8) // selector for InvalidPriceOrLiquidity()
                revert(0x1c, 0x04)
            }
        }

        // round to make sure that we don't pass the target price
        return
            zeroForOne
                ? getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountIn, true)
                : getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountIn, true);
    }

    /// @notice Gets the next sqrt price given an output amount of currency0 or currency1
    /// @dev Throws if price or liquidity are 0 or the next price is out of bounds
    /// @param sqrtPX96 The starting price before accounting for the output amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountOut How much of currency0, or currency1, is being swapped out
    /// @param zeroForOne Whether the amount out is currency1 or currency0
    /// @return uint160 The price after removing the output amount of currency0 or currency1
    function getNextSqrtPriceFromOutput(uint160 sqrtPX96, uint128 liquidity, uint256 amountOut, bool zeroForOne) internal pure returns (uint160) {
        // equivalent: if (sqrtPX96 == 0 || liquidity == 0) revert InvalidPriceOrLiquidity();
        assembly ("memory-safe") {
            if or(iszero(and(sqrtPX96, 0xffffffffffffffffffffffffffffffffffffffff)), iszero(and(liquidity, 0xffffffffffffffffffffffffffffffff))) {
                mstore(0, 0x4f2461b8) // selector for InvalidPriceOrLiquidity()
                revert(0x1c, 0x04)
            }
        }

        // round to make sure that we pass the target price
        return
            zeroForOne
                ? getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountOut, false)
                : getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountOut, false);
    }

    /// @notice Gets the amount0 delta between two prices
    /// @dev Calculates liquidity / sqrt(lower) - liquidity / sqrt(upper),
    /// i.e. liquidity * (sqrt(upper) - sqrt(lower)) / (sqrt(upper) * sqrt(lower))
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up or down
    /// @return uint256 Amount of currency0 required to cover a position of size liquidity between the two passed prices
    function getAmount0Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity, bool roundUp) internal pure returns (uint256) {
        unchecked {
            if (sqrtPriceAX96 > sqrtPriceBX96) (sqrtPriceAX96, sqrtPriceBX96) = (sqrtPriceBX96, sqrtPriceAX96);

            // equivalent: if (sqrtPriceAX96 == 0) revert InvalidPrice();
            assembly ("memory-safe") {
                if iszero(and(sqrtPriceAX96, 0xffffffffffffffffffffffffffffffffffffffff)) {
                    mstore(0, 0x00bfc921) // selector for InvalidPrice()
                    revert(0x1c, 0x04)
                }
            }

            uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
            uint256 numerator2 = sqrtPriceBX96 - sqrtPriceAX96;

            return
                roundUp
                    ? UnsafeMath.divRoundingUp(FullMath.mulDivRoundingUp(numerator1, numerator2, sqrtPriceBX96), sqrtPriceAX96)
                    : FullMath.mulDiv(numerator1, numerator2, sqrtPriceBX96) / sqrtPriceAX96;
        }
    }

    /// @notice Equivalent to: `a >= b ? a - b : b - a`
    function absDiff(uint160 a, uint160 b) internal pure returns (uint256 res) {
        assembly ("memory-safe") {
            let diff := sub(and(a, 0xffffffffffffffffffffffffffffffffffffffff), and(b, 0xffffffffffffffffffffffffffffffffffffffff))
            // mask = 0 if a >= b else -1 (all 1s)
            let mask := sar(255, diff)
            // if a >= b, res = a - b = 0 ^ (a - b)
            // if a < b, res = b - a = ~~(b - a) = ~(-(b - a) - 1) = ~(a - b - 1) = (-1) ^ (a - b - 1)
            // either way, res = mask ^ (a - b + mask)
            res := xor(mask, add(mask, diff))
        }
    }

    /// @notice Gets the amount1 delta between two prices
    /// @dev Calculates liquidity * (sqrt(upper) - sqrt(lower))
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up, or down
    /// @return amount1 Amount of currency1 required to cover a position of size liquidity between the two passed prices
    function getAmount1Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, uint128 liquidity, bool roundUp) internal pure returns (uint256 amount1) {
        uint256 numerator = absDiff(sqrtPriceAX96, sqrtPriceBX96);
        uint256 denominator = FixedPoint96.Q96;
        uint256 _liquidity = uint256(liquidity);

        /**
         * Equivalent to:
         *   amount1 = roundUp
         *       ? FullMath.mulDivRoundingUp(liquidity, sqrtPriceBX96 - sqrtPriceAX96, FixedPoint96.Q96)
         *       : FullMath.mulDiv(liquidity, sqrtPriceBX96 - sqrtPriceAX96, FixedPoint96.Q96);
         * Cannot overflow because `type(uint128).max * type(uint160).max >> 96 < (1 << 192)`.
         */
        amount1 = FullMath.mulDiv(_liquidity, numerator, denominator);
        assembly ("memory-safe") {
            amount1 := add(amount1, and(gt(mulmod(_liquidity, numerator, denominator), 0), roundUp))
        }
    }

    /// @notice Helper that gets signed currency0 delta
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount0 delta
    /// @return int256 Amount of currency0 corresponding to the passed liquidityDelta between the two prices
    function getAmount0Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, int128 liquidity) internal pure returns (int256) {
        unchecked {
            return
                liquidity < 0
                    ? getAmount0Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(-liquidity), false).toInt256()
                    : -getAmount0Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(liquidity), true).toInt256();
        }
    }

    /// @notice Helper that gets signed currency1 delta
    /// @param sqrtPriceAX96 A sqrt price
    /// @param sqrtPriceBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount1 delta
    /// @return int256 Amount of currency1 corresponding to the passed liquidityDelta between the two prices
    function getAmount1Delta(uint160 sqrtPriceAX96, uint160 sqrtPriceBX96, int128 liquidity) internal pure returns (int256) {
        unchecked {
            return
                liquidity < 0
                    ? getAmount1Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(-liquidity), false).toInt256()
                    : -getAmount1Delta(sqrtPriceAX96, sqrtPriceBX96, uint128(liquidity), true).toInt256();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {CustomRevert} from "./CustomRevert.sol";

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/SafeCast.sol
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
    using CustomRevert for bytes4;

    error SafeCastOverflow();

    /// @notice Cast a uint256 to a uint160, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return y The downcasted integer, now type uint160
    function toUint160(uint256 x) internal pure returns (uint160 y) {
        y = uint160(x);
        if (y != x) SafeCastOverflow.selector.revertWith();
    }

    /// @notice Cast a uint256 to a uint128, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return y The downcasted integer, now type uint128
    function toUint128(uint256 x) internal pure returns (uint128 y) {
        y = uint128(x);
        if (x != y) SafeCastOverflow.selector.revertWith();
    }

    /// @notice Cast a int128 to a uint128, revert on overflow or underflow
    /// @param x The int128 to be casted
    /// @return y The casted integer, now type uint128
    function toUint128(int128 x) internal pure returns (uint128 y) {
        if (x < 0) SafeCastOverflow.selector.revertWith();
        y = uint128(x);
    }

    /// @notice Cast a int256 to a int128, revert on overflow or underflow
    /// @param x The int256 to be downcasted
    /// @return y The downcasted integer, now type int128
    function toInt128(int256 x) internal pure returns (int128 y) {
        y = int128(x);
        if (y != x) SafeCastOverflow.selector.revertWith();
    }

    /// @notice Cast a uint256 to a int256, revert on overflow
    /// @param x The uint256 to be casted
    /// @return y The casted integer, now type int256
    function toInt256(uint256 x) internal pure returns (int256 y) {
        y = int256(x);
        if (y < 0) SafeCastOverflow.selector.revertWith();
    }

    /// @notice Cast a uint256 to a int128, revert on overflow
    /// @param x The uint256 to be downcasted
    /// @return The downcasted integer, now type int128
    function toInt128(uint256 x) internal pure returns (int128) {
        if (x >= 1 << 127) SafeCastOverflow.selector.revertWith();
        return int128(int256(x));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @dev https://github.com/Uniswap/v4-core/blob/80311e34080fee64b6fc6c916e9a51a437d0e482/src/libraries/UnsafeMath.sol
/// @title Math functions that do not check inputs or outputs
/// @notice Contains methods that perform common math functions but do not do any overflow or underflow checks
library UnsafeMath {
    /// @notice Returns ceil(x / y)
    /// @dev division by 0 will return 0, and should be checked externally
    /// @param x The dividend
    /// @param y The divisor
    /// @return z The quotient, ceil(x / y)
    function divRoundingUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        assembly ("memory-safe") {
            z := add(div(x, y), gt(mod(x, y), 0))
        }
    }

    /// @notice Calculates floor(a×b÷denominator)
    /// @dev division by 0 will return 0, and should be checked externally
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result, floor(a×b÷denominator)
    function simpleMulDiv(uint256 a, uint256 b, uint256 denominator) internal pure returns (uint256 result) {
        assembly ("memory-safe") {
            result := div(mul(a, b), denominator)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "remappings": [
    "ds-test/=node_modules/ds-test/src/",
    "forge-std/=node_modules/forge-std/src/",
    "@openzeppelin/=node_modules/@openzeppelin/",
    "@zoralabs/shared-contracts/=node_modules/@zoralabs/shared-contracts/src/",
    "solady/=node_modules/solady/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": true,
  "libraries": {}
}

[{"inputs":[{"internalType":"address","name":"_protocolRewardRecipient","type":"address"},{"internalType":"address","name":"_protocolRewards","type":"address"},{"internalType":"address","name":"_weth","type":"address"},{"internalType":"address","name":"_v3Factory","type":"address"},{"internalType":"address","name":"_swapRouter","type":"address"},{"internalType":"address","name":"_airlock","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AddressZero","type":"error"},{"inputs":[],"name":"AlreadyOwner","type":"error"},{"inputs":[],"name":"CannotMintZeroLiquidity","type":"error"},{"inputs":[],"name":"DopplerPoolMustHaveMoreThan2DiscoveryPositions","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"ERC20TransferAmountMismatch","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"EthAmountMismatch","type":"error"},{"inputs":[],"name":"EthAmountTooSmall","type":"error"},{"inputs":[],"name":"EthTransferFailed","type":"error"},{"inputs":[],"name":"EthTransferInvalid","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"InitialOrderSizeTooLarge","type":"error"},{"inputs":[],"name":"InsufficientFunds","type":"error"},{"inputs":[],"name":"InsufficientLiquidity","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidCurrencyLowerTick","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"InvalidMarketType","type":"error"},{"inputs":[],"name":"InvalidPoolVersion","type":"error"},{"inputs":[{"internalType":"int24","name":"tickLower","type":"int24"},{"internalType":"int24","name":"tickUpper","type":"int24"}],"name":"InvalidTickRangeMisordered","type":"error"},{"inputs":[],"name":"InvalidWethLowerTick","type":"error"},{"inputs":[],"name":"LegacyPoolMustHaveOneDiscoveryPosition","type":"error"},{"inputs":[],"name":"MarketAlreadyGraduated","type":"error"},{"inputs":[],"name":"MarketNotGraduated","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"limit","type":"uint256"}],"name":"MaxShareToBeSoldExceeded","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[],"name":"NotOwner","type":"error"},{"inputs":[],"name":"NumDiscoveryPositionsOutOfRange","type":"error"},{"inputs":[],"name":"OneOwnerRequired","type":"error"},{"inputs":[],"name":"OnlyOwner","type":"error"},{"inputs":[],"name":"OnlyPool","type":"error"},{"inputs":[],"name":"OnlyWeth","type":"error"},{"inputs":[],"name":"OwnerCannotBeAddressZero","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"SlippageBoundsExceeded","type":"error"},{"inputs":[],"name":"UseRevokeOwnershipToRemoveSelf","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"buyer","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"address","name":"tradeReferrer","type":"address"},{"indexed":false,"internalType":"uint256","name":"coinsPurchased","type":"uint256"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountSold","type":"uint256"}],"name":"CoinBuy","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"payoutRecipient","type":"address"},{"indexed":true,"internalType":"address","name":"platformReferrer","type":"address"},{"indexed":false,"internalType":"address","name":"protocolRewardRecipient","type":"address"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"components":[{"internalType":"uint256","name":"totalAmountCurrency","type":"uint256"},{"internalType":"uint256","name":"totalAmountCoin","type":"uint256"},{"internalType":"uint256","name":"creatorPayoutAmountCurrency","type":"uint256"},{"internalType":"uint256","name":"creatorPayoutAmountCoin","type":"uint256"},{"internalType":"uint256","name":"platformReferrerAmountCurrency","type":"uint256"},{"internalType":"uint256","name":"platformReferrerAmountCoin","type":"uint256"},{"internalType":"uint256","name":"protocolAmountCurrency","type":"uint256"},{"internalType":"uint256","name":"protocolAmountCoin","type":"uint256"}],"indexed":false,"internalType":"struct ICoin.MarketRewards","name":"marketRewards","type":"tuple"}],"name":"CoinMarketRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"prevRecipient","type":"address"},{"indexed":true,"internalType":"address","name":"newRecipient","type":"address"}],"name":"CoinPayoutRecipientUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"seller","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"address","name":"tradeReferrer","type":"address"},{"indexed":false,"internalType":"uint256","name":"coinsSold","type":"uint256"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountPurchased","type":"uint256"}],"name":"CoinSell","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"payoutRecipient","type":"address"},{"indexed":true,"internalType":"address","name":"platformReferrer","type":"address"},{"indexed":true,"internalType":"address","name":"tradeReferrer","type":"address"},{"indexed":false,"internalType":"address","name":"protocolRewardRecipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"creatorReward","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"platformReferrerReward","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"traderReferrerReward","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"protocolReward","type":"uint256"},{"indexed":false,"internalType":"address","name":"currency","type":"address"}],"name":"CoinTradeRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"senderBalance","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"recipientBalance","type":"uint256"}],"name":"CoinTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":false,"internalType":"string","name":"newURI","type":"string"},{"indexed":false,"internalType":"string","name":"name","type":"string"}],"name":"ContractMetadataUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"ContractURIUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"prevOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_TOTAL_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_ORDER_SIZE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PLATFORM_REFERRER_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PROTOCOL_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TOKEN_CREATOR_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TOTAL_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TRADE_REFERRER_FEE_BPS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"WETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"addOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"}],"name":"addOwners","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"airlock","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"orderSize","type":"uint256"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint160","name":"sqrtPriceLimitX96","type":"uint160"},{"internalType":"address","name":"tradeReferrer","type":"address"}],"name":"buy","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bool","name":"pushEthRewards","type":"bool"}],"name":"claimSecondaryRewards","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractVersion","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"currency","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"payoutRecipient_","type":"address"},{"internalType":"address[]","name":"owners_","type":"address[]"},{"internalType":"string","name":"tokenURI_","type":"string"},{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"},{"internalType":"bytes","name":"poolConfig_","type":"bytes"},{"internalType":"address","name":"platformReferrer_","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isOwner","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owners","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"payoutRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"platformReferrer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolConfiguration","outputs":[{"internalType":"uint8","name":"version","type":"uint8"},{"internalType":"int24","name":"tickLower","type":"int24"},{"internalType":"int24","name":"tickUpper","type":"int24"},{"internalType":"uint16","name":"numPositions","type":"uint16"},{"internalType":"uint256","name":"maxDiscoverySupplyShare","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolState","outputs":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"address","name":"numeraire","type":"address"},{"internalType":"int24","name":"tickLower","type":"int24"},{"internalType":"int24","name":"tickUpper","type":"int24"},{"internalType":"uint16","name":"numPositions","type":"uint16"},{"internalType":"bool","name":"isInitialized","type":"bool"},{"internalType":"bool","name":"isExited","type":"bool"},{"internalType":"uint256","name":"maxShareToBeSold","type":"uint256"},{"internalType":"uint256","name":"totalTokensOnBondingCurve","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"protocolRewardRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"protocolRewards","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"removeOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"}],"name":"removeOwners","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"revokeOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"orderSize","type":"uint256"},{"internalType":"uint256","name":"minAmountOut","type":"uint256"},{"internalType":"uint160","name":"sqrtPriceLimitX96","type":"uint160"},{"internalType":"address","name":"tradeReferrer","type":"address"}],"name":"sell","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"newURI","type":"string"}],"name":"setContractURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newPayoutRecipient","type":"address"}],"name":"setPayoutRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"swapRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount0Owed","type":"uint256"},{"internalType":"uint256","name":"amount1Owed","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"uniswapV3MintCallback","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"v3Factory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]