Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// external
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";

// internal
import "../utils/proxy/solidity-0.8.0/ProxyOwned.sol";
import "../utils/proxy/solidity-0.8.0/ProxyPausable.sol";
import "../interfaces/IAddressManager.sol";
import "../interfaces/IPriceFeed.sol";
import "../interfaces/ISpeedMarketsAMM.sol";

interface IERC20Decimals {
    function decimals() external view returns (uint);
}

/// @title An AMM utils for Thales speed markets
contract SpeedMarketsAMMUtils is Initializable, ProxyOwned, ProxyPausable {
    error UnauthorizedCollateralKeySetter();
    error CollateralNotSupportedOnPriceFeed();
    error InvalidCollateralDecimals();

    uint private constant SECONDS_PER_MINUTE = 60;
    uint private constant ONE = 1e18;

    IAddressManager private addressManager;

    /// @notice Mapping from collateral address to collateral key
    mapping(address => bytes32) public collateralKey;

    function initialize(address _owner, IAddressManager _addressManager) external initializer {
        setOwner(_owner);
        addressManager = _addressManager;
    }

    /// @notice get dynamic fee based on defined time thresholds for a given delta time
    /// @param _deltaTimeSec to search for appropriate time range (in seconds)
    /// @param _timeThresholds array of time thresholds for each fee (in minutes)
    /// @param _fees array of fees for every time range
    /// @param _defaultFee if _deltaTime doesn't have appropriate time range return this value
    /// @return fee defined for specific time range to which _deltaTime belongs to
    function getFeeByTimeThreshold(
        uint64 _deltaTimeSec,
        uint[] calldata _timeThresholds,
        uint[] calldata _fees,
        uint _defaultFee
    ) external pure returns (uint fee) {
        fee = _defaultFee;
        uint _deltaTime = _deltaTimeSec / SECONDS_PER_MINUTE;
        for (uint i = _timeThresholds.length; i > 0; i--) {
            if (_deltaTime >= _timeThresholds[i - 1]) {
                fee = _fees[i - 1];
                break;
            }
        }
    }

    /// @notice Set collateral key for a given collateral address
    /// @param _collateral The collateral address
    /// @param _key The collateral key
    function setCollateralKey(address _collateral, bytes32 _key) external {
        if (msg.sender != addressManager.getAddress("SpeedMarketsAMM") && msg.sender != owner)
            revert UnauthorizedCollateralKeySetter();
        collateralKey[_collateral] = _key;
        uint price = _getCollateralPriceInUSD(_collateral);
        if (price == 0) revert CollateralNotSupportedOnPriceFeed();
        if (IERC20Decimals(_collateral).decimals() == 0) revert InvalidCollateralDecimals();
        emit CollateralKeySet(_collateral, _key);
    }

    /// @notice return the price of the pool collateral
    function getCollateralPriceInUSD(address _collateral) external view returns (uint) {
        return _getCollateralPriceInUSD(_collateral);
    }

    /// @notice return the price of the pool collateral
    function _getCollateralPriceInUSD(address _collateral) internal view returns (uint) {
        return IPriceFeed(addressManager.getAddress("PriceFeed")).rateForCurrency(collateralKey[_collateral]);
    }

    function transformCollateralToUSD(
        address _collateral,
        address defaultCollateral,
        uint _amount
    ) external view returns (uint) {
        uint price = _getCollateralPriceInUSD(_collateral);
        uint defaultCollateralDecimals = IERC20Decimals(defaultCollateral).decimals();
        if (price == 0) revert CollateralNotSupportedOnPriceFeed();
        if (IERC20Decimals(_collateral).decimals() == 0) revert InvalidCollateralDecimals();
        return _transformToUSD(_amount, price, IERC20Decimals(_collateral).decimals(), defaultCollateralDecimals);
    }

    function _transformToUSD(
        uint _amountInCollateral,
        uint _collateralPriceInUSD,
        uint _collateralDecimals,
        uint _defaultCollateralDecimals
    ) internal pure returns (uint amountInUSD) {
        amountInUSD = _mulWithDecimals(_amountInCollateral, _collateralPriceInUSD);
        if (_collateralDecimals < _defaultCollateralDecimals) {
            amountInUSD = amountInUSD * 10**(_defaultCollateralDecimals - _collateralDecimals);
        } else if (_collateralDecimals > _defaultCollateralDecimals) {
            amountInUSD = amountInUSD / 10**(_collateralDecimals - _defaultCollateralDecimals);
        }
    }

    function _mulWithDecimals(uint _firstMul, uint _secondMul) internal pure returns (uint) {
        return (_firstMul * _secondMul) / ONE;
    }

    event CollateralKeySet(address indexed collateral, bytes32 key);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/utils/Initializable.sol)

pragma solidity ^0.8.0;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// Clone of syntetix contract without constructor
contract ProxyOwned {
    address public owner;
    address public nominatedOwner;
    bool private _initialized;
    bool private _transferredAtInit;

    function setOwner(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        require(!_initialized, "Already initialized, use nominateNewOwner");
        _initialized = true;
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    function transferOwnershipAtInit(address proxyAddress) external onlyOwner {
        require(proxyAddress != address(0), "Invalid address");
        require(!_transferredAtInit, "Already transferred");
        owner = proxyAddress;
        _transferredAtInit = true;
        emit OwnerChanged(owner, proxyAddress);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// Inheritance
import "./ProxyOwned.sol";

// Clone of syntetix contract without constructor

contract ProxyPausable is ProxyOwned {
    uint public lastPauseTime;
    bool public paused;

    

    /**
     * @notice Change the paused state of the contract
     * @dev Only the contract owner may call this.
     */
    function setPaused(bool _paused) external onlyOwner {
        // Ensure we're actually changing the state before we do anything
        if (_paused == paused) {
            return;
        }

        // Set our paused state.
        paused = _paused;

        // If applicable, set the last pause time.
        if (paused) {
            lastPauseTime = block.timestamp;
        }

        // Let everyone know that our pause state has changed.
        emit PauseChanged(paused);
    }

    event PauseChanged(bool isPaused);

    modifier notPaused {
        require(!paused, "This action cannot be performed while the contract is paused");
        _;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.16;

interface IAddressManager {
    struct Addresses {
        address safeBox;
        address referrals;
        address stakingThales;
        address multiCollateralOnOffRamp;
        address pyth;
        address speedMarketsAMM;
    }

    function safeBox() external view returns (address);

    function referrals() external view returns (address);

    function stakingThales() external view returns (address);

    function multiCollateralOnOffRamp() external view returns (address);

    function pyth() external view returns (address);

    function speedMarketsAMM() external view returns (address);

    function getAddresses() external view returns (Addresses memory);

    function getAddresses(string[] calldata _contractNames) external view returns (address[] memory contracts);

    function getAddress(string memory _contractName) external view returns (address contract_);

    function checkIfContractExists(string memory _contractName) external view returns (bool contractExists);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.16;

interface IPriceFeed {
    // Structs
    struct RateAndUpdatedTime {
        uint216 rate;
        uint40 time;
    }

    // Mutative functions
    function addAggregator(bytes32 currencyKey, address aggregatorAddress) external;

    function removeAggregator(bytes32 currencyKey) external;

    // Views

    function rateForCurrency(bytes32 currencyKey) external view returns (uint);

    function rateAndUpdatedTime(bytes32 currencyKey) external view returns (uint rate, uint time);

    function getRates() external view returns (uint[] memory);

    function getCurrencies() external view returns (bytes32[] memory);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.16;

import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";

import "@pythnetwork/pyth-sdk-solidity/PythStructs.sol";

import "../SpeedMarkets/SpeedMarket.sol";
import "../SpeedMarkets/SpeedMarketsAMM.sol";
import "./ISpeedMarketsAMMUtils.sol";

interface ISpeedMarketsAMM {
    struct Params {
        bool supportedAsset;
        uint safeBoxImpact;
        uint64 maximumPriceDelay;
    }

    function sUSD() external view returns (IERC20Upgradeable);

    function createNewMarket(SpeedMarketsAMM.CreateMarketParams calldata _params) external;

    function resolveMarketWithPrice(address _market, int64 _finalPrice) external;

    function canResolveMarket(address market) external view returns (bool);

    function multicollateralEnabled() external view returns (bool);

    function offrampHelper(address user, uint amount) external;

    function supportedAsset(bytes32 _asset) external view returns (bool);

    function assetToPythId(bytes32 _asset) external view returns (bytes32);

    function minBuyinAmount() external view returns (uint);

    function maxBuyinAmount() external view returns (uint);

    function minimalTimeToMaturity() external view returns (uint);

    function maximalTimeToMaturity() external view returns (uint);

    function maximumPriceDelay() external view returns (uint64);

    function maximumPriceDelayForResolving() external view returns (uint64);

    function timeThresholdsForFees(uint _index) external view returns (uint);

    function lpFees(uint _index) external view returns (uint);

    function lpFee() external view returns (uint);

    function maxSkewImpact() external view returns (uint);

    function safeBoxImpact() external view returns (uint);

    function marketHasCreatedAtAttribute(address _market) external view returns (bool);

    function marketHasFeeAttribute(address _market) external view returns (bool);

    function maxRiskPerAsset(bytes32 _asset) external view returns (uint);

    function currentRiskPerAsset(bytes32 _asset) external view returns (uint);

    function maxRiskPerAssetAndDirection(bytes32 _asset, SpeedMarket.Direction _direction) external view returns (uint);

    function currentRiskPerAssetAndDirection(bytes32 _asset, SpeedMarket.Direction _direction) external view returns (uint);

    function whitelistedAddresses(address _wallet) external view returns (bool);

    function getLengths(address _user) external view returns (uint[5] memory);

    function getParams(bytes32 _asset) external view returns (Params memory);

    function supportedNativeCollateral(address _collateral) external view returns (bool);

    function bonusPerCollateral(address _collateral) external view returns (uint);

    function speedMarketsAMMUtils() external view returns (ISpeedMarketsAMMUtils);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

contract PythStructs {
    // A price with a degree of uncertainty, represented as a price +- a confidence interval.
    //
    // The confidence interval roughly corresponds to the standard error of a normal distribution.
    // Both the price and confidence are stored in a fixed-point numeric representation,
    // `x * (10^expo)`, where `expo` is the exponent.
    //
    // Please refer to the documentation at https://docs.pyth.network/consumers/best-practices for how
    // to how this price safely.
    struct Price {
        // Price
        int64 price;
        // Confidence interval around the price
        uint64 conf;
        // Price exponent
        int32 expo;
        // Unix timestamp describing when the price was published
        uint publishTime;
    }

    // PriceFeed represents a current aggregate price from pyth publisher feeds.
    struct PriceFeed {
        // The price ID.
        bytes32 id;
        // Latest available price
        Price price;
        // Latest available exponentially-weighted moving average price
        Price emaPrice;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";

import "../interfaces/ISpeedMarketsAMM.sol";

contract SpeedMarket {
    using SafeERC20Upgradeable for IERC20Upgradeable;

    struct InitParams {
        address _speedMarketsAMM;
        address _user;
        bytes32 _asset;
        uint64 _strikeTime;
        int64 _strikePrice;
        uint64 _strikePricePublishTime;
        Direction _direction;
        address _collateral;
        uint _buyinAmount;
        uint _safeBoxImpact;
        uint _lpFee;
        uint _payout;
    }

    enum Direction {
        Up,
        Down
    }

    address public user;
    bytes32 public asset;
    uint64 public strikeTime;
    int64 public strikePrice;
    uint64 public strikePricePublishTime;
    Direction public direction;
    uint public buyinAmount;
    uint public payout;
    address public collateral;
    bool public resolved;
    int64 public finalPrice;
    Direction public result;

    ISpeedMarketsAMM public speedMarketsAMM;

    uint public safeBoxImpact;
    uint public lpFee;
    uint256 public createdAt;

    /* ========== CONSTRUCTOR ========== */

    bool public initialized = false;

    function initialize(InitParams calldata params) external {
        require(!initialized, "Speed market already initialized");
        initialized = true;
        speedMarketsAMM = ISpeedMarketsAMM(params._speedMarketsAMM);
        user = params._user;
        asset = params._asset;
        strikeTime = params._strikeTime;
        strikePrice = params._strikePrice;
        strikePricePublishTime = params._strikePricePublishTime;
        direction = params._direction;
        buyinAmount = params._buyinAmount;
        safeBoxImpact = params._safeBoxImpact;
        lpFee = params._lpFee;
        collateral = params._collateral;
        payout = params._payout;
        IERC20Upgradeable(params._collateral).approve(params._speedMarketsAMM, type(uint256).max);
        createdAt = block.timestamp;
    }

    function resolve(int64 _finalPrice) external onlyAMM {
        require(!resolved, "already resolved");
        require(block.timestamp > strikeTime, "not ready to be resolved");
        resolved = true;
        finalPrice = _finalPrice;

        if (finalPrice < strikePrice) {
            result = Direction.Down;
        } else if (finalPrice > strikePrice) {
            result = Direction.Up;
        } else {
            result = direction == Direction.Up ? Direction.Down : Direction.Up;
        }
        uint payoutToTransfer = IERC20Upgradeable(collateral).balanceOf(address(this));

        if (direction == result) {
            if (payoutToTransfer > payout) {
                IERC20Upgradeable(collateral).safeTransfer(address(speedMarketsAMM), payoutToTransfer - payout);
                payoutToTransfer = payout;
            }
            IERC20Upgradeable(collateral).safeTransfer(user, payoutToTransfer);
        } else {
            IERC20Upgradeable(collateral).safeTransfer(address(speedMarketsAMM), payoutToTransfer);
        }

        emit Resolved(finalPrice, result, direction == result);
    }

    function isUserWinner() external view returns (bool) {
        return resolved && (direction == result);
    }

    modifier onlyAMM() {
        require(msg.sender == address(speedMarketsAMM), "only the AMM may perform these methods");
        _;
    }

    event Resolved(int64 finalPrice, Direction result, bool userIsWinner);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// external
import "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";

import "@openzeppelin/contracts-4.4.1/proxy/Clones.sol";

import "@pythnetwork/pyth-sdk-solidity/IPyth.sol";
import "@pythnetwork/pyth-sdk-solidity/PythStructs.sol";

// internal
import "../utils/proxy/solidity-0.8.0/ProxyReentrancyGuard.sol";
import "../utils/proxy/solidity-0.8.0/ProxyOwned.sol";
import "../utils/proxy/solidity-0.8.0/ProxyPausable.sol";
import "../utils/libraries/AddressSetLib.sol";

import "../interfaces/IStakingThales.sol";
import "../interfaces/IMultiCollateralOnOffRamp.sol";
import "../interfaces/IReferrals.sol";
import "../interfaces/IAddressManager.sol";
import "../interfaces/ISpeedMarketsAMM.sol";

import "./SpeedMarket.sol";
import "../interfaces/ISpeedMarketsAMMUtils.sol";

/// @title An AMM for Thales speed markets
contract SpeedMarketsAMM is Initializable, ProxyOwned, ProxyPausable, ProxyReentrancyGuard {
    using SafeERC20Upgradeable for IERC20Upgradeable;
    using AddressSetLib for AddressSetLib.AddressSet;

    AddressSetLib.AddressSet internal _activeMarkets;
    AddressSetLib.AddressSet internal _maturedMarkets;

    uint private constant ONE = 1e18;
    uint private constant MAX_APPROVAL = type(uint256).max;

    /// ========== Custom Errors ==========
    error MulticollateralOnrampDisabled();
    error NotEnoughReceivedViaOnramp();
    error SkewSlippageExceeded();
    error RiskPerDirectionExceeded();
    error RiskPerAssetExceeded();
    error AssetNotSupported();
    error InvalidBuyinAmount();
    error InvalidStrikeTime();
    error TimeTooFarIntoFuture();
    error CanNotResolve();
    error InvalidPrice();
    error ResolverNotWhitelisted();
    error OnlyCreatorAllowed();
    error BonusTooHigh();
    error OnlyMarketOwner();
    error EtherTransferFailed();
    error MismatchedLengths();
    error CollateralNotSupported();
    error InvalidOffRampCollateral();
    error CanOnlyBeCalledFromResolverOrOwner();
    error InvalidWhitelistAddress();

    IERC20Upgradeable public sUSD;

    address public speedMarketMastercopy;

    uint public safeBoxImpact;
    uint public lpFee;

    address private safeBox; // unused, moved to AddressManager

    mapping(bytes32 => bool) public supportedAsset;

    uint public minimalTimeToMaturity;
    uint public maximalTimeToMaturity;

    uint public minBuyinAmount;
    uint public maxBuyinAmount;

    mapping(bytes32 => uint) public maxRiskPerAsset;
    mapping(bytes32 => uint) public currentRiskPerAsset;

    mapping(bytes32 => bytes32) public assetToPythId;

    IPyth private pyth; // unused, moved to AddressManager

    uint64 public maximumPriceDelay;

    IStakingThales private stakingThales; // unused, moved to AddressManager

    mapping(address => AddressSetLib.AddressSet) internal _activeMarketsPerUser;
    mapping(address => AddressSetLib.AddressSet) internal _maturedMarketsPerUser;

    mapping(address => bool) public whitelistedAddresses;
    IMultiCollateralOnOffRamp private multiCollateralOnOffRamp; // unused, moved to AddressManager
    bool public multicollateralEnabled;

    mapping(bytes32 => mapping(SpeedMarket.Direction => uint)) public maxRiskPerAssetAndDirection;
    mapping(bytes32 => mapping(SpeedMarket.Direction => uint)) public currentRiskPerAssetAndDirection;

    uint64 public maximumPriceDelayForResolving;

    mapping(address => bool) public marketHasCreatedAtAttribute;

    address private referrals; // unused, moved to AddressManager

    uint[] public timeThresholdsForFees;
    uint[] public lpFees;

    ISpeedMarketsAMMUtils public speedMarketsAMMUtils;

    mapping(address => bool) public marketHasFeeAttribute;

    /// @return The address of the address manager contract
    IAddressManager public addressManager;

    uint public maxSkewImpact;
    uint public skewSlippage;

    mapping(address => bool) public supportedNativeCollateral;

    /// @notice Bonus percentage per collateral token (e.g., 0.02e18 for 2%)
    mapping(address => uint) public bonusPerCollateral;

    /// @param user user wallet address
    /// @param asset market asset
    /// @param strikeTime strike time, if zero delta time is used
    /// @param delta delta time, used if strike time is zero
    /// @param pythPrice structure with pyth price and publish time
    /// @param direction direction (UP/DOWN)
    /// @param collateral collateral address, for default collateral use zero address
    /// @param collateralAmount collateral amount, for non default includes fees
    /// @param referrer referrer address
    /// @param skewImpact skew impact, used to check skew slippage
    struct CreateMarketParams {
        address user;
        bytes32 asset;
        uint64 strikeTime;
        uint64 delta;
        PythStructs.Price pythPrice;
        SpeedMarket.Direction direction;
        address collateral;
        uint collateralAmount;
        address referrer;
        uint skewImpact;
    }

    struct InternalCreateParams {
        CreateMarketParams createMarketParams;
        bool transferCollateral;
        uint64 strikeTime;
        uint buyinAmount;
        uint buyinAmountInUSD;
        address defaultCollateral;
    }

    receive() external payable {}

    function initialize(address _owner, IERC20Upgradeable _sUSD) external initializer {
        setOwner(_owner);
        initNonReentrant();
        sUSD = _sUSD;
        supportedNativeCollateral[address(_sUSD)] = true;
    }

    /// @notice create new market for a given delta/strike time
    /// @param _params parameters for creating market
    /// @dev This function is used to create a new market
    function createNewMarket(CreateMarketParams calldata _params) external nonReentrant notPaused onlyCreator {
        IAddressManager.Addresses memory contractsAddresses = addressManager.getAddresses();

        // Calculate strike time: use provided strikeTime or current timestamp + delta
        uint64 strikeTime = _params.strikeTime == 0 ? uint64(block.timestamp + _params.delta) : _params.strikeTime;
        // Determine collateral configuration
        (
            bool isNativeCollateral,
            address defaultCollateral,
            uint buyinAmount,
            uint buyinAmountInUSD
        ) = _determineCollateralConfig(_params, strikeTime, contractsAddresses);
        // Create internal parameters struct
        InternalCreateParams memory internalParams = InternalCreateParams({
            createMarketParams: _params,
            strikeTime: strikeTime,
            buyinAmount: buyinAmount,
            transferCollateral: isNativeCollateral,
            defaultCollateral: defaultCollateral,
            buyinAmountInUSD: buyinAmountInUSD
        });
        _createNewMarket(internalParams, contractsAddresses);
    }

    /// @notice Determines collateral configuration and calculates buyin amount
    /// @param _params Market creation parameters
    /// @param strikeTime Calculated strike time
    /// @param contractsAddresses Contract addresses from address manager
    /// @return isNativeCollateral Whether the collateral is natively supported
    /// @return defaultCollateral The default collateral address to use
    /// @return buyinAmount The calculated buyin amount
    function _determineCollateralConfig(
        CreateMarketParams calldata _params,
        uint64 strikeTime,
        IAddressManager.Addresses memory contractsAddresses
    )
        internal
        returns (
            bool isNativeCollateral,
            address defaultCollateral,
            uint buyinAmount,
            uint buyinAmountInUSD
        )
    {
        isNativeCollateral = supportedNativeCollateral[_params.collateral] || _params.collateral == address(0);
        if (supportedNativeCollateral[_params.collateral] && _params.collateral != address(0)) {
            defaultCollateral = _params.collateral;
        } else {
            defaultCollateral = address(sUSD);
        }

        // Calculate buyin amount based on collateral type
        if (isNativeCollateral) {
            buyinAmount = buyinAmountInUSD = _params.collateralAmount;
            if (defaultCollateral != address(sUSD)) {
                buyinAmountInUSD = speedMarketsAMMUtils.transformCollateralToUSD(
                    defaultCollateral,
                    address(sUSD),
                    _params.collateralAmount
                );
            }
        } else {
            // For external collaterals, convert through onramp
            buyinAmount = buyinAmountInUSD = _getBuyinWithConversion(
                _params.user,
                _params.collateral,
                _params.collateralAmount,
                strikeTime,
                contractsAddresses
            );
        }
    }

    /// @notice Gets the buyin amount with conversion
    /// @param user The user address
    /// @param collateral The collateral address
    /// @param collateralAmount The collateral amount
    /// @param strikeTime The strike time
    /// @param contractsAddresses Contract addresses from address manager
    /// @return buyinAmount The calculated buyin amount
    function _getBuyinWithConversion(
        address user,
        address collateral,
        uint collateralAmount,
        uint64 strikeTime,
        IAddressManager.Addresses memory contractsAddresses
    ) internal returns (uint buyinAmount) {
        if (!multicollateralEnabled) revert MulticollateralOnrampDisabled();

        uint amountBefore = sUSD.balanceOf(address(this));
        IMultiCollateralOnOffRamp iMultiCollateralOnOffRamp = IMultiCollateralOnOffRamp(
            contractsAddresses.multiCollateralOnOffRamp
        );

        IERC20Upgradeable(collateral).safeTransferFrom(user, address(this), collateralAmount);
        IERC20Upgradeable(collateral).approve(address(iMultiCollateralOnOffRamp), collateralAmount);
        uint convertedAmount = iMultiCollateralOnOffRamp.onramp(collateral, collateralAmount);

        uint lpFeeForDeltaTime = speedMarketsAMMUtils.getFeeByTimeThreshold(
            uint64(strikeTime - block.timestamp),
            timeThresholdsForFees,
            lpFees,
            lpFee
        );

        buyinAmount = (convertedAmount * ONE) / (ONE + safeBoxImpact + lpFeeForDeltaTime);

        uint amountDiff = sUSD.balanceOf(address(this)) - amountBefore;
        if (amountDiff < buyinAmount) revert NotEnoughReceivedViaOnramp();
    }

    /// @notice Gets the skew by asset and direction
    /// @param _asset The asset
    /// @param _direction The direction
    /// @return skew The skew
    function _getSkewByAssetAndDirection(bytes32 _asset, SpeedMarket.Direction _direction) internal view returns (uint) {
        return
            (((currentRiskPerAssetAndDirection[_asset][_direction] * ONE) /
                maxRiskPerAssetAndDirection[_asset][_direction]) * maxSkewImpact) / ONE;
    }

    /// @notice Handles the risk and gets the fee
    /// @param asset The asset
    /// @param direction The direction
    /// @param buyinAmountInUSD The buyin amount in USD
    /// @param strikeTime The strike time
    /// @param skewImpact The skew impact
    function _handleRiskAndGetFee(
        bytes32 asset,
        SpeedMarket.Direction direction,
        uint buyinAmountInUSD,
        uint64 strikeTime,
        uint skewImpact,
        uint payoutBonus
    ) internal returns (uint lpFeeWithSkew, uint payoutInUSD) {
        uint skew = _getSkewByAssetAndDirection(asset, direction);
        if (skew > skewImpact + skewSlippage) revert SkewSlippageExceeded();

        SpeedMarket.Direction oppositeDirection = direction == SpeedMarket.Direction.Up
            ? SpeedMarket.Direction.Down
            : SpeedMarket.Direction.Up;

        // calculate discount as half of skew for opposite direction
        uint discount = skew == 0 ? _getSkewByAssetAndDirection(asset, oppositeDirection) / 2 : 0;
        // decrease risk for opposite direction if there is, otherwise increase risk for current direction
        if (currentRiskPerAssetAndDirection[asset][oppositeDirection] > buyinAmountInUSD) {
            currentRiskPerAssetAndDirection[asset][oppositeDirection] -= buyinAmountInUSD;
        } else {
            currentRiskPerAssetAndDirection[asset][direction] +=
                buyinAmountInUSD -
                currentRiskPerAssetAndDirection[asset][oppositeDirection];
            currentRiskPerAssetAndDirection[asset][oppositeDirection] = 0;
            if (currentRiskPerAssetAndDirection[asset][direction] > maxRiskPerAssetAndDirection[asset][direction]) {
                revert RiskPerDirectionExceeded();
            }
        }

        // (LP fee by delta time) + (skew impact based on risk per direction and asset) - (discount as half of opposite skew)
        lpFeeWithSkew =
            speedMarketsAMMUtils.getFeeByTimeThreshold(
                uint64(strikeTime - block.timestamp),
                timeThresholdsForFees,
                lpFees,
                lpFee
            ) +
            skew -
            discount;
        // payout with bonus
        payoutInUSD = buyinAmountInUSD * 2 + (buyinAmountInUSD * 2 * payoutBonus) / ONE;
        // update risk per asset with the bonus applied
        currentRiskPerAsset[asset] += (payoutInUSD - (buyinAmountInUSD * (ONE + lpFeeWithSkew)) / ONE);
        if (currentRiskPerAsset[asset] > maxRiskPerAsset[asset]) {
            revert RiskPerAssetExceeded();
        }
    }

    /// @notice Handles the referrer and safe box
    /// @param user The user address
    /// @param referrer The referrer address
    /// @param buyinAmount The buyin amount
    /// @param collateral The collateral address
    /// @param contractsAddresses Contract addresses from address manager
    function _handleReferrerAndSafeBox(
        address user,
        address referrer,
        uint buyinAmount,
        IERC20Upgradeable collateral,
        IAddressManager.Addresses memory contractsAddresses
    ) internal returns (uint referrerShare) {
        IReferrals iReferrals = IReferrals(contractsAddresses.referrals);
        if (address(iReferrals) != address(0)) {
            address newOrExistingReferrer;
            if (referrer != address(0)) {
                iReferrals.setReferrer(referrer, user);
                newOrExistingReferrer = referrer;
            } else {
                newOrExistingReferrer = iReferrals.referrals(user);
            }

            if (newOrExistingReferrer != address(0)) {
                uint referrerFeeByTier = iReferrals.getReferrerFee(newOrExistingReferrer);
                if (referrerFeeByTier > 0) {
                    referrerShare = (buyinAmount * referrerFeeByTier) / ONE;
                    collateral.safeTransfer(newOrExistingReferrer, referrerShare);
                    emit ReferrerPaid(newOrExistingReferrer, user, referrerShare, buyinAmount);
                }
            }
        }
        collateral.safeTransfer(contractsAddresses.safeBox, (buyinAmount * safeBoxImpact) / ONE - referrerShare);
    }

    /// @notice Creates a new market
    /// @param params Internal market creation parameters
    /// @param contractsAddresses Contract addresses from address manager
    function _createNewMarket(InternalCreateParams memory params, IAddressManager.Addresses memory contractsAddresses)
        internal
    {
        if (!supportedAsset[params.createMarketParams.asset]) revert AssetNotSupported();
        if (params.buyinAmountInUSD < minBuyinAmount || params.buyinAmountInUSD > maxBuyinAmount) {
            revert InvalidBuyinAmount();
        }

        if (params.strikeTime < block.timestamp + minimalTimeToMaturity) {
            revert InvalidStrikeTime();
        }

        if (params.strikeTime > block.timestamp + maximalTimeToMaturity) {
            revert TimeTooFarIntoFuture();
        }
        (uint lpFeeWithSkew, uint payoutInUSD) = _handleRiskAndGetFee(
            params.createMarketParams.asset,
            params.createMarketParams.direction,
            params.buyinAmountInUSD,
            params.strikeTime,
            params.createMarketParams.skewImpact,
            params.transferCollateral ? bonusPerCollateral[params.defaultCollateral] : 0
        );
        if (params.transferCollateral) {
            uint totalAmountToTransfer = (params.buyinAmount * (ONE + safeBoxImpact + lpFeeWithSkew)) / ONE;
            IERC20Upgradeable(params.defaultCollateral).safeTransferFrom(
                params.createMarketParams.user,
                address(this),
                totalAmountToTransfer
            );
        }
        SpeedMarket srm = SpeedMarket(Clones.clone(speedMarketMastercopy));
        uint payout = payoutInUSD;
        bool defaultCollateralIsNotUSD = params.transferCollateral && params.defaultCollateral != address(sUSD);
        if (defaultCollateralIsNotUSD) {
            payout = params.buyinAmount * 2 + (params.buyinAmount * 2 * bonusPerCollateral[params.defaultCollateral]) / ONE;
        }
        srm.initialize(
            SpeedMarket.InitParams(
                address(this),
                params.createMarketParams.user,
                params.createMarketParams.asset,
                params.strikeTime,
                params.createMarketParams.pythPrice.price,
                uint64(params.createMarketParams.pythPrice.publishTime),
                params.createMarketParams.direction,
                params.defaultCollateral,
                params.buyinAmount,
                safeBoxImpact,
                lpFeeWithSkew,
                payout
            )
        );
        if (defaultCollateralIsNotUSD) {
            IERC20Upgradeable(params.defaultCollateral).safeTransfer(address(srm), payout);
        } else {
            sUSD.safeTransfer(address(srm), payout);
        }
        _handleReferrerAndSafeBox(
            params.createMarketParams.user,
            params.createMarketParams.referrer,
            params.buyinAmount,
            IERC20Upgradeable(params.defaultCollateral),
            contractsAddresses
        );
        _activeMarkets.add(address(srm));
        _activeMarketsPerUser[params.createMarketParams.user].add(address(srm));
        marketHasCreatedAtAttribute[address(srm)] = true;
        marketHasFeeAttribute[address(srm)] = true;
        emit MarketCreated(
            address(srm),
            params.createMarketParams.user,
            params.createMarketParams.asset,
            params.strikeTime,
            params.createMarketParams.pythPrice.price,
            params.createMarketParams.direction,
            params.buyinAmount
        );
        emit MarketCreatedWithFees(
            address(srm),
            params.createMarketParams.user,
            params.createMarketParams.asset,
            params.strikeTime,
            params.createMarketParams.pythPrice.price,
            params.createMarketParams.direction,
            params.buyinAmountInUSD,
            safeBoxImpact,
            lpFeeWithSkew
        );
    }

    /// @notice owner can resolve market for a given market address with finalPrice
    function resolveMarketWithPrice(address _market, int64 _finalPrice) external {
        if (msg.sender != addressManager.getAddress("SpeedMarketsAMMResolver") && msg.sender != owner)
            revert CanOnlyBeCalledFromResolverOrOwner();
        if (!canResolveMarket(_market)) revert CanNotResolve();

        _resolveMarketWithPrice(_market, _finalPrice);
    }

    function _resolveMarketWithPrice(address market, int64 _finalPrice) internal {
        SpeedMarket(market).resolve(_finalPrice);
        _activeMarkets.remove(market);
        _maturedMarkets.add(market);
        address user = SpeedMarket(market).user();

        if (_activeMarketsPerUser[user].contains(market)) {
            _activeMarketsPerUser[user].remove(market);
        }
        _maturedMarketsPerUser[user].add(market);

        bytes32 asset = SpeedMarket(market).asset();
        address collateral = SpeedMarket(market).collateral();
        uint buyinAmountInUSD = collateral == address(sUSD) || collateral == address(0)
            ? SpeedMarket(market).buyinAmount()
            : speedMarketsAMMUtils.transformCollateralToUSD(collateral, address(sUSD), SpeedMarket(market).buyinAmount());
        SpeedMarket.Direction direction = SpeedMarket(market).direction();
        if (currentRiskPerAssetAndDirection[asset][direction] > buyinAmountInUSD) {
            currentRiskPerAssetAndDirection[asset][direction] -= buyinAmountInUSD;
        } else {
            currentRiskPerAssetAndDirection[asset][direction] = 0;
        }

        if (!SpeedMarket(market).isUserWinner()) {
            if (currentRiskPerAsset[asset] > 2 * buyinAmountInUSD) {
                currentRiskPerAsset[asset] -= (2 * buyinAmountInUSD);
            } else {
                currentRiskPerAsset[asset] = 0;
            }
        }

        emit MarketResolved(market, SpeedMarket(market).result(), SpeedMarket(market).isUserWinner());
    }

    function offrampHelper(address user, uint amount) external {
        if (msg.sender != addressManager.getAddress("SpeedMarketsAMMResolver")) revert ResolverNotWhitelisted();
        sUSD.safeTransferFrom(user, msg.sender, amount);
    }

    /// @notice Transfer amount to destination address
    function transferAmount(
        address _collateral,
        address _destination,
        uint _amount
    ) external onlyOwner {
        IERC20Upgradeable(_collateral).safeTransfer(_destination, _amount);
        emit AmountTransfered(_collateral, _destination, _amount);
    }

    //////////// getters /////////////////

    /// @notice activeMarkets returns list of active markets
    /// @param index index of the page
    /// @param pageSize number of addresses per page
    /// @return address[] active market list
    function activeMarkets(uint index, uint pageSize) external view returns (address[] memory) {
        return _activeMarkets.getPage(index, pageSize);
    }

    /// @notice maturedMarkets returns list of matured markets
    /// @param index index of the page
    /// @param pageSize number of addresses per page
    /// @return address[] matured market list
    function maturedMarkets(uint index, uint pageSize) external view returns (address[] memory) {
        return _maturedMarkets.getPage(index, pageSize);
    }

    /// @notice activeMarkets returns list of active markets per user
    function activeMarketsPerUser(
        uint index,
        uint pageSize,
        address user
    ) external view returns (address[] memory) {
        return _activeMarketsPerUser[user].getPage(index, pageSize);
    }

    /// @notice maturedMarkets returns list of matured markets per user
    function maturedMarketsPerUser(
        uint index,
        uint pageSize,
        address user
    ) external view returns (address[] memory) {
        return _maturedMarketsPerUser[user].getPage(index, pageSize);
    }

    /// @notice whether a market can be resolved
    function canResolveMarket(address market) public view returns (bool) {
        return
            _activeMarkets.contains(market) &&
            (SpeedMarket(market).strikeTime() < block.timestamp) &&
            !SpeedMarket(market).resolved();
    }

    /// @notice get lengths of all arrays
    function getLengths(address user) external view returns (uint[5] memory) {
        return [
            _activeMarkets.elements.length,
            _maturedMarkets.elements.length,
            _activeMarketsPerUser[user].elements.length,
            _maturedMarketsPerUser[user].elements.length,
            lpFees.length
        ];
    }

    /// @notice get params for chained market
    function getParams(bytes32 asset) external view returns (ISpeedMarketsAMM.Params memory) {
        ISpeedMarketsAMM.Params memory params;
        params.supportedAsset = supportedAsset[asset];
        params.safeBoxImpact = safeBoxImpact;
        params.maximumPriceDelay = maximumPriceDelay;
        return params;
    }

    //////////////////setters/////////////////

    /// @notice Set addresses used in AMM
    /// @param _mastercopy to use to create markets
    /// @param _speedMarketsAMMUtils address of speed markets AMM utils
    /// @param _addressManager address manager contract
    function setAMMAddresses(
        address _mastercopy,
        ISpeedMarketsAMMUtils _speedMarketsAMMUtils,
        address _addressManager
    ) external onlyOwner {
        speedMarketMastercopy = _mastercopy;
        speedMarketsAMMUtils = _speedMarketsAMMUtils;
        addressManager = IAddressManager(_addressManager);
        emit AMMAddressesChanged(_mastercopy, _speedMarketsAMMUtils, _addressManager);
    }

    /// @notice Set parameters for limits
    function setLimitParams(
        uint _minBuyinAmount,
        uint _maxBuyinAmount,
        uint _minimalTimeToMaturity,
        uint _maximalTimeToMaturity,
        uint64 _maximumPriceDelay,
        uint64 _maximumPriceDelayForResolving
    ) external onlyOwner {
        minBuyinAmount = _minBuyinAmount;
        maxBuyinAmount = _maxBuyinAmount;
        minimalTimeToMaturity = _minimalTimeToMaturity;
        maximalTimeToMaturity = _maximalTimeToMaturity;
        maximumPriceDelay = _maximumPriceDelay;
        maximumPriceDelayForResolving = _maximumPriceDelayForResolving;
        emit LimitParamsChanged(
            _minBuyinAmount,
            _maxBuyinAmount,
            _minimalTimeToMaturity,
            _maximalTimeToMaturity,
            _maximumPriceDelay,
            _maximumPriceDelayForResolving
        );
    }

    /// @notice maximum risk per asset and per asset and direction
    function setMaxRisks(
        bytes32 asset,
        uint _maxRiskPerAsset,
        uint _maxRiskPerAssetAndDirection
    ) external onlyOwner {
        maxRiskPerAsset[asset] = _maxRiskPerAsset;
        currentRiskPerAsset[asset] = 0;
        maxRiskPerAssetAndDirection[asset][SpeedMarket.Direction.Up] = _maxRiskPerAssetAndDirection;
        maxRiskPerAssetAndDirection[asset][SpeedMarket.Direction.Down] = _maxRiskPerAssetAndDirection;
        emit SetMaxRisks(asset, _maxRiskPerAsset, _maxRiskPerAssetAndDirection);
    }

    /// @notice set SafeBox, max skew impact and skew slippage
    /// @param _safeBoxImpact safebox impact
    /// @param _maxSkewImpact skew impact
    /// @param _skewSlippage skew slippage
    function setSafeBoxAndMaxSkewImpact(
        uint _safeBoxImpact,
        uint _maxSkewImpact,
        uint _skewSlippage
    ) external onlyOwner {
        safeBoxImpact = _safeBoxImpact;
        maxSkewImpact = _maxSkewImpact;
        skewSlippage = _skewSlippage;
        emit SafeBoxAndMaxSkewImpactChanged(_safeBoxImpact, _maxSkewImpact, _skewSlippage);
    }

    /// @notice set LP fee params
    /// @param _timeThresholds array of time thresholds (minutes) for different fees in ascending order
    /// @param _lpFees array of fees applied to each time frame defined in _timeThresholds
    /// @param _lpFee default LP fee when there are no dynamic fees
    function setLPFeeParams(
        uint[] calldata _timeThresholds,
        uint[] calldata _lpFees,
        uint _lpFee
    ) external onlyOwner {
        if (_timeThresholds.length != _lpFees.length) revert MismatchedLengths();

        delete timeThresholdsForFees;
        delete lpFees;
        for (uint i; i < _timeThresholds.length; ++i) {
            timeThresholdsForFees.push(_timeThresholds[i]);
            lpFees.push(_lpFees[i]);
        }
        lpFee = _lpFee;
        emit SetLPFeeParams(_timeThresholds, _lpFees, _lpFee);
    }

    /// @notice set whether an asset is supported
    function setSupportedAsset(bytes32 asset, bool _supported) external onlyOwner {
        supportedAsset[asset] = _supported;
        emit SetSupportedAsset(asset, _supported);
    }

    /// @notice map asset to PythID, e.g. "ETH" as bytes 32 to an equivalent ID from pyth docs
    function setAssetToPythID(bytes32 asset, bytes32 pythId) external onlyOwner {
        assetToPythId[asset] = pythId;
        emit SetAssetToPythID(asset, pythId);
    }

    /// @notice set sUSD address (default collateral)
    function setSusdAddress(address _sUSD) external onlyOwner {
        sUSD = IERC20Upgradeable(_sUSD);
        emit SusdAddressChanged(_sUSD);
    }

    /// @notice set multi-collateral enabled
    function setMultiCollateralOnOffRampEnabled(bool _enabled) external onlyOwner {
        address multiCollateralAddress = addressManager.multiCollateralOnOffRamp();
        if (multiCollateralAddress != address(0)) {
            sUSD.approve(multiCollateralAddress, _enabled ? MAX_APPROVAL : 0);
        }
        multicollateralEnabled = _enabled;
        emit MultiCollateralOnOffRampEnabled(_enabled);
    }

    /// @notice Set bonus percentage for a collateral
    /// @param _collateral collateral address
    /// @param _bonus bonus percentage (e.g., 0.02e18 for 2%)
    function setSupportedNativeCollateralAndBonus(
        address _collateral,
        bool _supported,
        uint _bonus,
        bytes32 _collateralKey
    ) external onlyOwner {
        // 10% bonus as max
        if (_bonus > 1e17) revert BonusTooHigh();

        bonusPerCollateral[_collateral] = _bonus;
        supportedNativeCollateral[_collateral] = _supported;
        speedMarketsAMMUtils.setCollateralKey(_collateral, _collateralKey);
        emit CollateralBonusSet(_collateral, _bonus);
    }

    /// @notice adding/removing whitelist address depending on a flag
    /// @param _whitelistAddress address that needed to be whitelisted or removed from WL
    /// @param _flag adding or removing from whitelist (true: add, false: remove)
    function addToWhitelist(address _whitelistAddress, bool _flag) external onlyOwner {
        if (_whitelistAddress == address(0)) revert InvalidWhitelistAddress();

        whitelistedAddresses[_whitelistAddress] = _flag;
        emit AddedIntoWhitelist(_whitelistAddress, _flag);
    }

    //////////////////modifiers/////////////////

    modifier onlyCreator() {
        address speedMarketsCreator = addressManager.getAddress("SpeedMarketsAMMCreator");
        if (msg.sender != speedMarketsCreator) revert OnlyCreatorAllowed();

        _;
    }

    //////////////////events/////////////////

    event MarketCreated(
        address _market,
        address _user,
        bytes32 _asset,
        uint _strikeTime,
        int64 _strikePrice,
        SpeedMarket.Direction _direction,
        uint _buyinAmount
    );
    event MarketCreatedWithFees(
        address _market,
        address _user,
        bytes32 _asset,
        uint _strikeTime,
        int64 _strikePrice,
        SpeedMarket.Direction _direction,
        uint _buyinAmount,
        uint _safeBoxImpact,
        uint _lpFee
    );

    event MarketResolved(address _market, SpeedMarket.Direction _result, bool _userIsWinner);

    event AMMAddressesChanged(address _mastercopy, ISpeedMarketsAMMUtils _speedMarketsAMMUtils, address _addressManager);
    event LimitParamsChanged(
        uint _minBuyinAmount,
        uint _maxBuyinAmount,
        uint _minimalTimeToMaturity,
        uint _maximalTimeToMaturity,
        uint _maximumPriceDelay,
        uint _maximumPriceDelayForResolving
    );
    event SetMaxRisks(bytes32 asset, uint _maxRiskPerAsset, uint _maxRiskPerAssetAndDirection);
    event SafeBoxAndMaxSkewImpactChanged(uint _safeBoxImpact, uint _maxSkewImpact, uint _skewSlippage);
    event SetLPFeeParams(uint[] _timeThresholds, uint[] _lpFees, uint _lpFee);
    event SetSupportedAsset(bytes32 asset, bool _supported);
    event SetAssetToPythID(bytes32 asset, bytes32 pythId);
    event SusdAddressChanged(address _sUSD);
    event MultiCollateralOnOffRampEnabled(bool _enabled);
    event ReferrerPaid(address refferer, address trader, uint amount, uint volume);
    event AmountTransfered(address _collateral, address _destination, uint _amount);
    event CollateralBonusSet(address indexed collateral, uint bonus);
    event AddedIntoWhitelist(address _whitelistAddress, bool _flag);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title An AMM utils for Thales speed markets
interface ISpeedMarketsAMMUtils {
    function getFeeByTimeThreshold(
        uint64 _deltaTimeSec,
        uint[] calldata _timeThresholds,
        uint[] calldata _fees,
        uint _defaultFee
    ) external pure returns (uint fee);

    function collateralKey(address _collateral) external view returns (bytes32);

    function setCollateralKey(address _collateral, bytes32 _key) external;

    function transformCollateralToUSD(
        address _collateral,
        address defaultCollateral,
        uint _amount
    ) external view returns (uint);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20Upgradeable {
    using AddressUpgradeable for address;

    function safeTransfer(
        IERC20Upgradeable token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20Upgradeable token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUpgradeable {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMathUpgradeable {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/Clones.sol)

pragma solidity ^0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 *
 * _Available since v3.4._
 */
library Clones {
    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address implementation) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create(0, ptr, 0x37)
        }
        require(instance != address(0), "ERC1167: create failed");
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `implementation` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create2(0, ptr, 0x37, salt)
        }
        require(instance != address(0), "ERC1167: create2 failed");
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt,
        address deployer
    ) internal pure returns (address predicted) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, implementation))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
            mstore(add(ptr, 0x38), shl(0x60, deployer))
            mstore(add(ptr, 0x4c), salt)
            mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
            predicted := keccak256(add(ptr, 0x37), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(address implementation, bytes32 salt)
        internal
        view
        returns (address predicted)
    {
        return predictDeterministicAddress(implementation, salt, address(this));
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

import "./PythStructs.sol";
import "./IPythEvents.sol";

/// @title Consume prices from the Pyth Network (https://pyth.network/).
/// @dev Please refer to the guidance at https://docs.pyth.network/consumers/best-practices for how to consume prices safely.
/// @author Pyth Data Association
interface IPyth is IPythEvents {
    /// @notice Returns the period (in seconds) that a price feed is considered valid since its publish time
    function getValidTimePeriod() external view returns (uint validTimePeriod);

    /// @notice Returns the price and confidence interval.
    /// @dev Reverts if the price has not been updated within the last `getValidTimePeriod()` seconds.
    /// @param id The Pyth Price Feed ID of which to fetch the price and confidence interval.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPrice(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price and confidence interval.
    /// @dev Reverts if the EMA price is not available.
    /// @param id The Pyth Price Feed ID of which to fetch the EMA price and confidence interval.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPrice(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the price of a price feed without any sanity checks.
    /// @dev This function returns the most recent price update in this contract without any recency checks.
    /// This function is unsafe as the returned price update may be arbitrarily far in the past.
    ///
    /// Users of this function should check the `publishTime` in the price to ensure that the returned price is
    /// sufficiently recent for their application. If you are considering using this function, it may be
    /// safer / easier to use either `getPrice` or `getPriceNoOlderThan`.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPriceUnsafe(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the price that is no older than `age` seconds of the current time.
    /// @dev This function is a sanity-checked version of `getPriceUnsafe` which is useful in
    /// applications that require a sufficiently-recent price. Reverts if the price wasn't updated sufficiently
    /// recently.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPriceNoOlderThan(
        bytes32 id,
        uint age
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price of a price feed without any sanity checks.
    /// @dev This function returns the same price as `getEmaPrice` in the case where the price is available.
    /// However, if the price is not recent this function returns the latest available price.
    ///
    /// The returned price can be from arbitrarily far in the past; this function makes no guarantees that
    /// the returned price is recent or useful for any particular application.
    ///
    /// Users of this function should check the `publishTime` in the price to ensure that the returned price is
    /// sufficiently recent for their application. If you are considering using this function, it may be
    /// safer / easier to use either `getEmaPrice` or `getEmaPriceNoOlderThan`.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPriceUnsafe(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price that is no older than `age` seconds
    /// of the current time.
    /// @dev This function is a sanity-checked version of `getEmaPriceUnsafe` which is useful in
    /// applications that require a sufficiently-recent price. Reverts if the price wasn't updated sufficiently
    /// recently.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPriceNoOlderThan(
        bytes32 id,
        uint age
    ) external view returns (PythStructs.Price memory price);

    /// @notice Update price feeds with given update messages.
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    /// Prices will be updated if they are more recent than the current stored prices.
    /// The call will succeed even if the update is not the most recent.
    /// @dev Reverts if the transferred fee is not sufficient or the updateData is invalid.
    /// @param updateData Array of price update data.
    function updatePriceFeeds(bytes[] calldata updateData) external payable;

    /// @notice Wrapper around updatePriceFeeds that rejects fast if a price update is not necessary. A price update is
    /// necessary if the current on-chain publishTime is older than the given publishTime. It relies solely on the
    /// given `publishTimes` for the price feeds and does not read the actual price update publish time within `updateData`.
    ///
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    ///
    /// `priceIds` and `publishTimes` are two arrays with the same size that correspond to senders known publishTime
    /// of each priceId when calling this method. If all of price feeds within `priceIds` have updated and have
    /// a newer or equal publish time than the given publish time, it will reject the transaction to save gas.
    /// Otherwise, it calls updatePriceFeeds method to update the prices.
    ///
    /// @dev Reverts if update is not needed or the transferred fee is not sufficient or the updateData is invalid.
    /// @param updateData Array of price update data.
    /// @param priceIds Array of price ids.
    /// @param publishTimes Array of publishTimes. `publishTimes[i]` corresponds to known `publishTime` of `priceIds[i]`
    function updatePriceFeedsIfNecessary(
        bytes[] calldata updateData,
        bytes32[] calldata priceIds,
        uint64[] calldata publishTimes
    ) external payable;

    /// @notice Returns the required fee to update an array of price updates.
    /// @param updateData Array of price update data.
    /// @return feeAmount The required fee in Wei.
    function getUpdateFee(
        bytes[] calldata updateData
    ) external view returns (uint feeAmount);

    /// @notice Parse `updateData` and return price feeds of the given `priceIds` if they are all published
    /// within `minPublishTime` and `maxPublishTime`.
    ///
    /// You can use this method if you want to use a Pyth price at a fixed time and not the most recent price;
    /// otherwise, please consider using `updatePriceFeeds`. This method does not store the price updates on-chain.
    ///
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    ///
    ///
    /// @dev Reverts if the transferred fee is not sufficient or the updateData is invalid or there is
    /// no update for any of the given `priceIds` within the given time range.
    /// @param updateData Array of price update data.
    /// @param priceIds Array of price ids.
    /// @param minPublishTime minimum acceptable publishTime for the given `priceIds`.
    /// @param maxPublishTime maximum acceptable publishTime for the given `priceIds`.
    /// @return priceFeeds Array of the price feeds corresponding to the given `priceIds` (with the same order).
    function parsePriceFeedUpdates(
        bytes[] calldata updateData,
        bytes32[] calldata priceIds,
        uint64 minPublishTime,
        uint64 maxPublishTime
    ) external payable returns (PythStructs.PriceFeed[] memory priceFeeds);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the `nonReentrant` modifier
 * available, which can be aplied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 */
contract ProxyReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;
    bool private _initialized;

    function initNonReentrant() public {
        require(!_initialized, "Already initialized");
        _initialized = true;
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

library AddressSetLib {
    struct AddressSet {
        address[] elements;
        mapping(address => uint) indices;
    }

    function contains(AddressSet storage set, address candidate) internal view returns (bool) {
        if (set.elements.length == 0) {
            return false;
        }
        uint index = set.indices[candidate];
        return index != 0 || set.elements[0] == candidate;
    }

    function getPage(
        AddressSet storage set,
        uint index,
        uint pageSize
    ) internal view returns (address[] memory) {
        // NOTE: This implementation should be converted to slice operators if the compiler is updated to v0.6.0+
        uint endIndex = index + pageSize; // The check below that endIndex <= index handles overflow.

        // If the page extends past the end of the list, truncate it.
        if (endIndex > set.elements.length) {
            endIndex = set.elements.length;
        }
        if (endIndex <= index) {
            return new address[](0);
        }

        uint n = endIndex - index; // We already checked for negative overflow.
        address[] memory page = new address[](n);
        for (uint i; i < n; i++) {
            page[i] = set.elements[i + index];
        }
        return page;
    }

    function add(AddressSet storage set, address element) internal {
        // Adding to a set is an idempotent operation.
        if (!contains(set, element)) {
            set.indices[element] = set.elements.length;
            set.elements.push(element);
        }
    }

    function remove(AddressSet storage set, address element) internal {
        require(contains(set, element), "Element not in set.");
        // Replace the removed element with the last element of the list.
        uint index = set.indices[element];
        uint lastIndex = set.elements.length - 1; // We required that element is in the list, so it is not empty.
        if (index != lastIndex) {
            // No need to shift the last element if it is the one we want to delete.
            address shiftedElement = set.elements[lastIndex];
            set.elements[index] = shiftedElement;
            set.indices[shiftedElement] = index;
        }
        set.elements.pop();
        delete set.indices[element];
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.16;

interface IStakingThales {
    function updateVolume(address account, uint amount) external;

    function updateStakingRewards(
        uint _currentPeriodRewards,
        uint _extraRewards,
        uint _revShare
    ) external;

    /* ========== VIEWS / VARIABLES ==========  */
    function totalStakedAmount() external view returns (uint);

    function stakedBalanceOf(address account) external view returns (uint);

    function currentPeriodRewards() external view returns (uint);

    function currentPeriodFees() external view returns (uint);

    function getLastPeriodOfClaimedRewards(address account) external view returns (uint);

    function getRewardsAvailable(address account) external view returns (uint);

    function getRewardFeesAvailable(address account) external view returns (uint);

    function getAlreadyClaimedRewards(address account) external view returns (uint);

    function getContractRewardFunds() external view returns (uint);

    function getContractFeeFunds() external view returns (uint);

    function getAMMVolume(address account) external view returns (uint);

    function decreaseAndTransferStakedThales(address account, uint amount) external;

    function increaseAndTransferStakedThales(address account, uint amount) external;

    function updateVolumeAtAmountDecimals(
        address account,
        uint amount,
        uint decimals
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.16;

interface IMultiCollateralOnOffRamp {
    function onramp(address collateral, uint collateralAmount) external returns (uint);

    function onrampWithEth(uint amount) external payable returns (uint);

    function getMinimumReceived(address collateral, uint amount) external view returns (uint);

    function getMinimumNeeded(address collateral, uint amount) external view returns (uint);

    function WETH9() external view returns (address);

    function offrampIntoEth(uint amount) external returns (uint);

    function offramp(address collateral, uint amount) external returns (uint);

    function offrampFromIntoEth(address collateralFrom, uint amount) external returns (uint);

    function offrampFrom(
        address collateralFrom,
        address collateralTo,
        uint amount
    ) external returns (uint);

    function priceFeed() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.5.16;

interface IReferrals {
    function referrals(address) external view returns (address);

    function getReferrerFee(address) external view returns (uint);

    function sportReferrals(address) external view returns (address);

    function setReferrer(address, address) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

/// @title IPythEvents contains the events that Pyth contract emits.
/// @dev This interface can be used for listening to the updates for off-chain and testing purposes.
interface IPythEvents {
    /// @dev Emitted when the price feed with `id` has received a fresh update.
    /// @param id The Pyth Price Feed ID.
    /// @param publishTime Publish time of the given price update.
    /// @param price Price of the given price update.
    /// @param conf Confidence interval of the given price update.
    event PriceFeedUpdate(
        bytes32 indexed id,
        uint64 publishTime,
        int64 price,
        uint64 conf
    );

    /// @dev Emitted when a batch price update is processed successfully.
    /// @param chainId ID of the source chain that the batch price update comes from.
    /// @param sequenceNumber Sequence number of the batch price update.
    event BatchPriceFeedUpdate(uint16 chainId, uint64 sequenceNumber);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 100
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"CollateralNotSupportedOnPriceFeed","type":"error"},{"inputs":[],"name":"InvalidCollateralDecimals","type":"error"},{"inputs":[],"name":"UnauthorizedCollateralKeySetter","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"collateral","type":"address"},{"indexed":false,"internalType":"bytes32","name":"key","type":"bytes32"}],"name":"CollateralKeySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldOwner","type":"address"},{"indexed":false,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerNominated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"isPaused","type":"bool"}],"name":"PauseChanged","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"collateralKey","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_collateral","type":"address"}],"name":"getCollateralPriceInUSD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"_deltaTimeSec","type":"uint64"},{"internalType":"uint256[]","name":"_timeThresholds","type":"uint256[]"},{"internalType":"uint256[]","name":"_fees","type":"uint256[]"},{"internalType":"uint256","name":"_defaultFee","type":"uint256"}],"name":"getFeeByTimeThreshold","outputs":[{"internalType":"uint256","name":"fee","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"contract IAddressManager","name":"_addressManager","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lastPauseTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"nominateNewOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"nominatedOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_collateral","type":"address"},{"internalType":"bytes32","name":"_key","type":"bytes32"}],"name":"setCollateralKey","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"setOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_paused","type":"bool"}],"name":"setPaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"proxyAddress","type":"address"}],"name":"transferOwnershipAtInit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_collateral","type":"address"},{"internalType":"address","name":"defaultCollateral","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"transformCollateralToUSD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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