Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

import {IPriceFeed} from "@interfaces/IPriceFeed.sol";
import {ISlippagePriceChecker} from "@interfaces/ISlippagePriceChecker.sol";

import {OwnableUpgradeable} from "@openzeppelin-upgradeable/contracts/access/OwnableUpgradeable.sol";
import {Initializable} from "@openzeppelin-upgradeable/contracts/proxy/utils/Initializable.sol";
import {UUPSUpgradeable} from "@openzeppelin-upgradeable/contracts/proxy/utils/UUPSUpgradeable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IERC20MetaData {
    function decimals() external view returns (uint8);
}

/**
 * @title PriceChecker
 * @notice Checks swap prices using Chainlink price feeds and applies slippage tolerance
 * @dev Implements the ISlippagePriceChecker interface with UUPS upgradeability
 */
contract SlippagePriceChecker is ISlippagePriceChecker, Initializable, UUPSUpgradeable, OwnableUpgradeable {
    /**
     * @notice The maximum basis points value (10,000 = 100%)
     * @dev Used for percentage calculations and as an upper bound for slippage
     */
    uint256 internal constant MAX_BPS = 10_000;

    /**
     * @notice Maps token addresses to their oracle configurations
     * @dev Each token can have multiple price feed configurations in sequence
     */
    mapping(address token => TokenFeedConfiguration[]) public tokenOracleData;

    mapping(address token => uint256 maxTimePriceValid) public maxTimePriceValid;

    /**
     * @notice Emitted when a token's price feed configuration is updated
     * @param token The address of the configured token
     * @param chainlinkFeed The address of the Chainlink price feed
     * @param reverse Whether to reverse the price calculation
     * @param heartbeat Maximum time between price feed updates
     * @param maxTimePriceValid Maximum time in seconds that a price is considered valid
     */
    event TokenConfigured(
        address indexed token, address indexed chainlinkFeed, bool reverse, uint256 heartbeat, uint256 maxTimePriceValid
    );

    /**
     * @notice Emitted when all price feed configurations for a token are removed
     * @param token The address of the token whose configurations were removed
     */
    event TokenConfigurationRemoved(address indexed token);

    /**
     * @dev Initializes the contract with the given owner
     * @param _owner The address that will own the contract
     */
    function initialize(address _owner) external initializer {
        __Ownable_init(_owner);
        __UUPSUpgradeable_init();
    }

    // ==================== External Functions ====================

    /**
     * @notice Adds a configuration for a token
     * @dev Only callable by the owner
     * @param token The address of the token to configure
     * @param configurations Array of TokenFeedConfiguration for the token
     * @param _maxTimePriceValid Maximum time in seconds that a price is considered valid
     */
    function addTokenConfiguration(
        address token,
        TokenFeedConfiguration[] calldata configurations,
        uint256 _maxTimePriceValid
    ) external onlyOwner {
        require(token != address(0), "Invalid token address");
        require(configurations.length > 0, "Empty configurations array");
        require(_maxTimePriceValid > 0, "Max time price valid can't be zero");

        // Set the maxTimePriceValid for the token
        maxTimePriceValid[token] = _maxTimePriceValid;

        // Add new configurations
        for (uint256 i = 0; i < configurations.length; i++) {
            require(configurations[i].chainlinkFeed != address(0), "Invalid chainlink feed address");
            require(configurations[i].heartbeat > 0, "Heartbeat must be greater than 0");
            tokenOracleData[token].push(configurations[i]);

            // Emit event for each configuration
            emit TokenConfigured(
                token,
                configurations[i].chainlinkFeed,
                configurations[i].reverse,
                configurations[i].heartbeat,
                _maxTimePriceValid
            );
        }
    }

    /**
     * @notice Removes all configurations for a token
     * @dev Only callable by the owner
     * @param token The address of the token to remove configuration for
     */
    function removeTokenConfiguration(address token) external onlyOwner {
        require(token != address(0), "Invalid token address");
        require(tokenOracleData[token].length > 0, "Token not configured");

        // Clear any existing configurations
        delete tokenOracleData[token];

        // Reset the maxTimePriceValid for the token
        delete maxTimePriceValid[token];

        emit TokenConfigurationRemoved(token);
    }

    // ==================== External View Functions ====================

    /**
     * @notice Checks if a swap meets the price requirements
     * @param _amountIn The input amount
     * @param _fromToken The token to swap from
     * @param _toToken The token to swap to
     * @param _minOut The minimum output amount
     * @param _slippageInBps The allowed slippage in basis points (e.g., 100 = 1%)
     * @return Whether the swap meets the price requirements
     */
    function checkPrice(
        uint256 _amountIn,
        address _fromToken,
        address _toToken,
        uint256 _minOut,
        uint256 _slippageInBps
    ) external view override returns (bool) {
        // Check that the sell token exists in the mapping
        require(tokenOracleData[_fromToken].length > 0, "Token not configured");
        require(_slippageInBps <= MAX_BPS, "Slippage exceeds maximum");

        // Get expected out using the token configuration from storage
        uint256 _expectedOut = getExpectedOut(_amountIn, _fromToken, _toToken);

        return _minOut > (_expectedOut * (MAX_BPS - _slippageInBps)) / MAX_BPS;
    }

    /**
     * @notice Gets the oracle information for a token
     * @dev Implements the interface function to access the token oracle configurations
     * @param token The token address to get oracle information for
     * @return Array of TokenFeedConfiguration for the token
     */
    function tokenOracleInformation(address token) external view override returns (TokenFeedConfiguration[] memory) {
        return tokenOracleData[token];
    }

    /**
     * @notice Checks if a token is configured as a reward token
     * @dev A token is considered a reward token if it has at least one oracle configuration
     * @param token The address of the token to check
     * @return Whether the token is configured as a reward token
     */
    function isRewardToken(address token) external view override returns (bool) {
        return tokenOracleData[token].length > 0 && maxTimePriceValid[token] > 0;
    }

    /**
     * @notice Gets the expected output amount for a swap
     * @param _amountIn The input amount
     * @param _fromToken The token to swap from
     * @param _toToken The token to swap to
     * @return The expected output amount
     */
    function getExpectedOut(uint256 _amountIn, address _fromToken, address _toToken)
        public
        view
        override
        returns (uint256)
    {
        // Check that the sell token exists in the mapping
        require(tokenOracleData[_fromToken].length > 0, "Token not configured");

        // Get the token configuration from storage
        TokenFeedConfiguration[] storage configs = tokenOracleData[_fromToken];

        // Convert to memory arrays for the getExpectedOutFromChainlink function
        address[] memory priceFeeds = new address[](configs.length);
        bool[] memory reverses = new bool[](configs.length);
        uint256[] memory heartbeats = new uint256[](configs.length);

        uint256 configsLen = configs.length;
        for (uint256 i = 0; i < configsLen; i++) {
            priceFeeds[i] = configs[i].chainlinkFeed;
            reverses[i] = configs[i].reverse;
            heartbeats[i] = configs[i].heartbeat;
        }

        return getExpectedOutFromChainlink(priceFeeds, reverses, heartbeats, _amountIn, _fromToken, _toToken);
    }

    // ==================== Internal Functions ====================

    /**
     * @notice Calculates the expected output amount using Chainlink price feeds
     * @param _priceFeeds The price feeds to use
     * @param _reverses Whether to reverse each price feed
     * @param _heartbeats The heartbeats for each price feed
     * @param _amountIn The input amount
     * @param _fromToken The token to swap from
     * @param _toToken The token to swap to
     * @return _expectedOutFromChainlink The expected output amount
     */
    function getExpectedOutFromChainlink(
        address[] memory _priceFeeds,
        bool[] memory _reverses,
        uint256[] memory _heartbeats,
        uint256 _amountIn,
        address _fromToken,
        address _toToken
    ) internal view returns (uint256 _expectedOutFromChainlink) {
        uint256 _priceFeedsLen = _priceFeeds.length;

        require(_priceFeedsLen > 0, "Need at least one price feed");
        require(_priceFeedsLen == _reverses.length, "Price feeds and reverses must have same length");
        require(_priceFeedsLen == _heartbeats.length, "Price feeds and heartbeats must have same length");

        for (uint256 _i = 0; _i < _priceFeedsLen; _i++) {
            IPriceFeed _priceFeed = IPriceFeed(_priceFeeds[_i]);

            (, int256 answer,, uint256 updatedAt,) = _priceFeed.latestRoundData();

            require(answer > 0, "Chainlink price cannot be lower or equal to 0");
            require(updatedAt != 0, "Round is in incompleted state");

            require(block.timestamp <= updatedAt + _heartbeats[_i], "Price feed update time exceeds heartbeat");

            uint256 _scaleAnswerBy = 10 ** uint256(_priceFeed.decimals());

            // If it's first iteration, use amountIn to calculate. Else, use the result from the previous iteration.
            uint256 _amountIntoThisIteration = _i == 0 ? _amountIn : _expectedOutFromChainlink;

            // Without a reverse, we multiply amount * price
            // With a reverse, we divide amount / price
            _expectedOutFromChainlink = _reverses[_i]
                ? (_amountIntoThisIteration * _scaleAnswerBy) / uint256(answer)
                : (_amountIntoThisIteration * uint256(answer)) / _scaleAnswerBy;
        }

        uint256 _fromTokenDecimals = uint256(IERC20MetaData(_fromToken).decimals());
        uint256 _toTokenDecimals = uint256(IERC20MetaData(_toToken).decimals());

        if (_fromTokenDecimals > _toTokenDecimals) {
            // if fromToken has more decimals than toToken, we need to divide
            _expectedOutFromChainlink = _expectedOutFromChainlink / (10 ** (_fromTokenDecimals - _toTokenDecimals));
        } else if (_fromTokenDecimals < _toTokenDecimals) {
            _expectedOutFromChainlink = _expectedOutFromChainlink * (10 ** (_toTokenDecimals - _fromTokenDecimals));
        }
    }

    /**
     * @dev Function that authorizes an upgrade to a new implementation
     * @param newImplementation The address of the new implementation
     */
    function _authorizeUpgrade(address newImplementation) internal override onlyOwner {}
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

interface IPriceFeed {
    function decimals() external view returns (uint8);
    function latestRoundData()
        external
        view
        returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.28;

/**
 * @title ISlippagePriceChecker
 * @notice Interface for swap checking functionality
 * @dev Combines price checking and expected output calculation
 */
interface ISlippagePriceChecker {
    /**
     * @notice Configuration for a token's price feed
     * @dev Stores the Chainlink feed address, whether to reverse the price calculation, and heartbeat
     * @param chainlinkFeed The address of the Chainlink price feed
     * @param reverse Whether to reverse the price calculation (divide instead of multiply)
     * @param heartbeat Maximum time in seconds between price feed updates before considering price stale
     */
    struct TokenFeedConfiguration {
        address chainlinkFeed;
        bool reverse;
        uint256 heartbeat;
    }

    /**
     * @notice Maps token addresses to their oracle configurations
     * @dev Each token can have multiple price feed configurations in sequence
     * @param token The token address to get oracle information for
     * @return Array of TokenFeedConfiguration for the token
     */
    function tokenOracleInformation(address token) external view returns (TokenFeedConfiguration[] memory);

    /**
     * @notice Checks if a swap meets the price requirements
     * @param _amountIn The input amount
     * @param _fromToken The token to swap from
     * @param _toToken The token to swap to
     * @param _minOut The minimum output amount
     * @param _slippageInBps The allowed slippage in basis points (e.g., 100 = 1%)
     * @return Whether the swap meets the price requirements
     */
    function checkPrice(
        uint256 _amountIn,
        address _fromToken,
        address _toToken,
        uint256 _minOut,
        uint256 _slippageInBps
    ) external view returns (bool);

    /**
     * @notice Gets the expected output amount for a swap
     * @param _amountIn The input amount
     * @param _fromToken The token to swap from
     * @param _toToken The token to swap to
     * @return The expected output amount
     */
    function getExpectedOut(uint256 _amountIn, address _fromToken, address _toToken) external view returns (uint256);

    /**
     * @notice Checks if a token is configured as a reward token
     * @dev A token is considered a reward token if it has at least one oracle configuration
     * @param token The address of the token to check
     * @return Whether the token is configured as a reward token
     */
    function isRewardToken(address token) external view returns (bool);

    /**
     * @notice Gets the maximum time a price is considered valid for a token
     * @param token The address of the token to check
     * @return The maximum time in seconds that a price is considered valid
     */
    function maxTimePriceValid(address token) external view returns (uint256);

    /**
     * @notice Adds a configuration for a token
     * @dev Only callable by the owner
     * @param token The address of the token to configure
     * @param configurations Array of TokenFeedConfiguration for the token
     * @param _maxTimePriceValid Maximum time in seconds that a price is considered valid
     */
    function addTokenConfiguration(
        address token,
        TokenFeedConfiguration[] calldata configurations,
        uint256 _maxTimePriceValid
    ) external;

    /**
     * @notice Removes all configurations for a token
     * @dev Only callable by the owner
     * @param token The address of the token to remove configuration for
     */
    function removeTokenConfiguration(address token) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (proxy/utils/UUPSUpgradeable.sol)

pragma solidity ^0.8.22;

import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol";
import {Initializable} from "./Initializable.sol";

/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);

    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";

    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();

    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);

    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }

    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }

    function __UUPSUpgradeable_init() internal onlyInitializing {
    }

    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967Utils.IMPLEMENTATION_SLOT;
    }

    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }

    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.
     * See {_onlyProxy}.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC-1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967Utils.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.22;

import {IBeacon} from "../beacon/IBeacon.sol";
import {IERC1967} from "../../interfaces/IERC1967.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";

/**
 * @dev This library provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.
 */
library ERC1967Utils {
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit IERC1967.Upgraded(newImplementation);

        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit IERC1967.AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the ERC-1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit IERC1967.BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1967.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (utils/Address.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }

        (bool success, bytes memory returndata) = recipient.call{value: amount}("");
        if (!success) {
            _revert(returndata);
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {Errors.FailedCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert Errors.InsufficientBalance(address(this).balance, value);
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
     * of an unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {Errors.FailedCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            assembly ("memory-safe") {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert Errors.FailedCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC-1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct Int256Slot {
        int256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Int256Slot` with member `value` located at `slot`.
     */
    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns a `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 *
 * _Available since v5.1._
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();

    /**
     * @dev A necessary precompile is missing.
     */
    error MissingPrecompile(address);
}

{
  "remappings": [
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@openzeppelin-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "@forge-std/=lib/forge-std/src/",
    "@addresses/=addresses/",
    "@contracts/=src/",
    "@interfaces/=src/interfaces/",
    "@libraries/=src/libraries/",
    "@script/=script/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@surl/=lib/surl/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "@test/=test/",
    "@openzeppelin-foundry-upgrades/=lib/openzeppelin-foundry-upgrades/src/",
    "ds-test/=lib/surl/lib/forge-std/lib/ds-test/src/",
    "openzeppelin-foundry-upgrades/=lib/openzeppelin-foundry-upgrades/src/",
    "solidity-stringutils/=lib/surl/lib/solidity-stringutils/",
    "surl/=lib/surl/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"ERC1967InvalidImplementation","type":"error"},{"inputs":[],"name":"ERC1967NonPayable","type":"error"},{"inputs":[],"name":"FailedCall","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"UUPSUnauthorizedCallContext","type":"error"},{"inputs":[{"internalType":"bytes32","name":"slot","type":"bytes32"}],"name":"UUPSUnsupportedProxiableUUID","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"}],"name":"TokenConfigurationRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"chainlinkFeed","type":"address"},{"indexed":false,"internalType":"bool","name":"reverse","type":"bool"},{"indexed":false,"internalType":"uint256","name":"heartbeat","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"maxTimePriceValid","type":"uint256"}],"name":"TokenConfigured","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"inputs":[],"name":"UPGRADE_INTERFACE_VERSION","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"components":[{"internalType":"address","name":"chainlinkFeed","type":"address"},{"internalType":"bool","name":"reverse","type":"bool"},{"internalType":"uint256","name":"heartbeat","type":"uint256"}],"internalType":"struct ISlippagePriceChecker.TokenFeedConfiguration[]","name":"configurations","type":"tuple[]"},{"internalType":"uint256","name":"_maxTimePriceValid","type":"uint256"}],"name":"addTokenConfiguration","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountIn","type":"uint256"},{"internalType":"address","name":"_fromToken","type":"address"},{"internalType":"address","name":"_toToken","type":"address"},{"internalType":"uint256","name":"_minOut","type":"uint256"},{"internalType":"uint256","name":"_slippageInBps","type":"uint256"}],"name":"checkPrice","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountIn","type":"uint256"},{"internalType":"address","name":"_fromToken","type":"address"},{"internalType":"address","name":"_toToken","type":"address"}],"name":"getExpectedOut","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isRewardToken","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"maxTimePriceValid","outputs":[{"internalType":"uint256","name":"maxTimePriceValid","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"removeTokenConfiguration","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"tokenOracleData","outputs":[{"internalType":"address","name":"chainlinkFeed","type":"address"},{"internalType":"bool","name":"reverse","type":"bool"},{"internalType":"uint256","name":"heartbeat","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"tokenOracleInformation","outputs":[{"components":[{"internalType":"address","name":"chainlinkFeed","type":"address"},{"internalType":"bool","name":"reverse","type":"bool"},{"internalType":"uint256","name":"heartbeat","type":"uint256"}],"internalType":"struct ISlippagePriceChecker.TokenFeedConfiguration[]","name":"","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]

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